← All proceedings

24th TheIIER INTERNATIONAL CONFERENCE

Proceedings cover: 24th TheIIER INTERNATIONAL CONFERENCE

Barcelona, Spain, 08-05-2015

ISBN 978-93-85465-04-8

16 papers

  1. Role of Investment Decisions on Success of Ministry of Sciences and Technology Projects In Iraq

    Anwar Mustafa Hasan, Saad Salman Awad

    Paper ID II-ABMITMAL-26124-01 · Pages 1-3

    Abstract

    Download PDF
  2. Seismic Performance of Flyashed Concrete Building with Flyash Brick and Burnt Clay Brick Masonry Infill

    M.Venkataraj, M.Helen Santhi

    Paper ID II-EMEMAL-27124-256 · Pages 4-7

    Abstract

    This paper presents the seismic performance of a flyashed concrete space framed building with two different types of masonry infills namely, clay brick masonry and flyash brick masonry using pushover analysis. Cement is replaced with flyash in concrete in the proportion of 30 %, 40 % and 50 % by weight of cement. The modeling and analysis of frames are carried out using the software SAP 2000. The lateral loads are calculated as per Indian Seismic code IS 1893:2002. The modal analysis shows that the fundamental frequency of the frames with flyash brick masonry is more than that of frames with clay brick masonry. The capacity curves obtained from the analysis reveal that the performance of frames with flyash brick masonry infill is superior to frames with clay brick masonry infill. The performance point is obtained for all the frames; moreover the spectral displacement is lower in the case of frames with flyash brick masonry. The results of this analysis would encourage the end users to switch over to the usage of flyash leading to a sustainable and greener environment.

    Keywords- Clay Brick Masonry, Flyash Brick Masonry, Flyashed Concrete, Performance Point, Pushover Analysis

    Download PDF
  3. Capability of Low Voltage Scanning Electron Microscope to differentiate Cervical Cell Classes

    Yessi Jusman, Siew Cheok Ng, Noor Azuan Abu Osman

    Paper ID II-EMEMAL-27124-304 · Pages 8-11

    Abstract

    Field Emission Scanning Electron Microscopy (FE-SEM) has become a popular imaging tool to elucidate the structure of a material at the micro-and/or the nano-scale level. Due to the great capability of the FE-SEM in characterizing the biological material, this study has investigated the capability of the FE-SEM to differentiate the cervical cell to be three classes. The classes are normal, low-grade squamous intraepithelial lesion (LSIL), and carcinoma. The cervical cells are scanned using FE-SEM including Energy Dispersive X-ray (EDX) and line scanning process. The results of the scanning are presented in electron images as qualitative results, and containing elements as quantitative results in this paper. Based on the quantitative results, FE-SEM has shown a great capability to differentiate the cervical cell classes.

    Keywords- Biomaterial, Cervical Cell, Classification, Electron Image, Line Scanning

    Download PDF
  4. Application of Self Organizing Maps (SOMs) Method to Rainfall Stations Clustering In Multisite Regions

    Farzad Fahimi, Ahmed H. El-Shafie

    Paper ID II-EMEMAL-27124-435 · Pages 12-16

    Abstract

    Download PDF
  5. Compression Strength, Hardness And Shear Strength of Heat Treated Beech (Fagus Orientalis) Wood In Buffered Mediums

    Aisona Talaei, Ali Karimi

    Paper ID II-ENSMAL-27124-02 · Pages 17-20

    Abstract

    Download PDF
  6. Design of SRAM Memory In Jpeg 2000 Image Compression With Multi Bit Flip Flops

    Mohammad Javeed, Syed Shaheen, Md Thahaseen

    Paper ID II-ENSMAL-27124-193 · Pages 21-24

    Abstract

    In this paper we propose a technique for reducing the size of memory for JPEG 2000. Generally, for storing the data Static Random Access Memory is used in JPEG 2000, after the quantization of bits. To reduce the size of memory we are considering multi bit flip flop concept with merging of flip flops concept.We also analyze the characteristics of discrete wavelet transform. The proposed system has the less complexity and the power consumption decreased significantly. Results shown that this method is very efficient in reducing the area also. Implemented the system with Xilinx vertex-5 family.

    Keywords- SRAM, JPEG2000, ENCODING, RDF, SBFF, MBFF

    Download PDF
  7. Grasping The Fundamentals of Big Data In Distributed Computing

    Mohana Ramakrishnan, Elammaran Jayamani

    Paper ID II-STEMMAL-29114-01 · Pages 25-28

    Abstract

    This paper exploringa number of big data contents, which selected in research for example data tools, data types and storage techniqueused in the real world applications. An intellectual revision made from the basics of big data.Big Data is the new era, giving new challenging environment in day-today life to understand or get rid of big data as fast. The choice of big data is often a fairly difficult one, and it is not uniquely determined by the facilities available.It must always be taken in the light of the operations that are performed on the large amount of data. It is an abstraction of reality that certain properties and characteristics of the real objects are ignored because they are peripheral and irrelevant to particular problems. In this context, the significance of various big data projects becomes apparent. The importance of using big data that offer a convenient set of basic abstractions common to most problems of data processing lies mainly in the area of reliability of the resulting programs. This paper describes big data tools,data types and techniques used in real time authentic applications.

    Keywords- Big Data, Tools and Techniques, Data Types, Characteristics, Distributed Computing

    Download PDF
  8. Design of A Current Starved Ring Oscillator For Phase Locked Loop (Pll)

    Zainab Kazemi, Sajjad Shalikar, A. M. Buhari, Seyed Abbas Mousavi Maleki

    Paper ID SP-ICIEEEKLMPR-14124-226 · Pages 29-34

    Abstract

    Download PDF
  9. Code-Driven Boundary Scan Testing

    Salim A. Jayousi, Mohd Saufee Muhammad

    Paper ID SP-ICIEEEKLMPR-14124-227 · Pages 35-38

    Abstract

    Download PDF
  10. Study The Use of Recycled Aggregates In The Casting Shallow Foundations

    Mahmud M. Abu Zeid, M. A. ATTIA

    Paper ID SP-ICRISETKLMPR-14124-225 · Pages 39-44

    Abstract

    Due to the shortage of space for land reclamation in Qena Governorate, it is difficult to dispose tons of construction, Adoption of recycled aggregate from concrete waste. Most of studies held in Qena Governorate on recycled aggregate produced from construction and demolition wastes, focused on using recycled aggregate as granular material for base coarse roads and for concrete mixes for concrete hollow blocks. The percent of fine recycled aggregate in the all recycled aggregate was about 9.0% so it was excluded from the study. 0 % and 40 % of coarse recycled aggregate was used in the experimental tests. Two kinds of natural fine aggregates were used, Qena sand and crushed stone. The experimental tests focused on, physical properties density and workability, and mechanical properties compressive strength, flexural strength and bond strength between concrete and steel in raft foundation for example. More than 70 concrete specimens were tested for the study. The tests showed that the workability of recycled aggregate is lower than the workability of natural aggregate concrete ,the slump test was about 1.0cm slump for 40 % coarse recycled aggregate concrete and increases as the percent of recycled aggregate decreases . The compressive strength of recycled aggregate concrete with 40 % recycled aggregate, is about 85% of natural aggregate concrete. The compressive strength increases as the Percent of recycle aggregate in concrete mixes decreases.

    Keywords- Recycled Aggregate, Compressive Strength, Raft Foundation, Natural Aggregate

    Download PDF
  11. A Crowned Helical Gear with Twist-Free Tooth Flanks Generated by a CNC Honing Machine

    Van-The Tran, Ruei-Hung Hsu, Chung-Biau Tsay

    Paper ID SP-MIESINGA-20124-301 · Pages 45-51

    Abstract

    Download PDF
  12. Managing The Ethical Issues Affecting Lending Products Performance In Albanian Banking System

    Ardita Todri, Francesco Scalera

    Paper ID II-ABMITSPN-08055-1104 · Pages 52-55

    Abstract

    The recent Albanian banking system profitability fluctuations in a fragile economy slowdown context are actually oriented toward lending in real economy and money-market activities when from the other side non-performing loans trend is increased while deposits and basic interest rates have demonstrated the contrary. Hence, the weighted regression linear analysis toward return on equity ratio with other quarterly explanatory variables such as: Deposits/Assets, Loans/Assets, Placements/Assets, GDP growth and interest rates (pertaining to 16 second level banks for the time period Q3/2007-Q4/2010) is used to identify the determinants of non-performing loans in the market in question. The analysis results points out ethical issues in lending products affecting the quality of most crucial activity for the banks survival own selves, borrowing customers welfare and their social responsibility by revealing new standards in their credit risk management and future strategic goals.

    Download PDF
  13. Nonlinear Least Squares Regression Analysis And Diagnosis For Optical And Laser Measurement Systems

    Zhengmao Ye, Habib Mohamadian

    Paper ID II-ENSSPIN-08054-01 · Pages 56-61

    Abstract

    Download PDF
  14. New Qualitative Method To Investigate The Vibration Of Composite Rectangular Plates Under The Effect Of Dimension And Rigidities Ratio Of Both Perpendicular Sides

    Hamada Samy, Benmansour Toufik

    Paper ID II-MAPESPN-10055-1314 · Pages 62-67

    Abstract

    In this work we propose a qualitative method that allows rapid expertise of the vibration behavior of composite rectangular plates taking into account the dimensions ratio (a/b), and the effect of the rigidity ratio (Dx/Dy) along the two axes of the plate (x,y). The comparative analysis of two or more composite rectangular plates which differ in their boundary conditions(ex:SSCC / SCSC)is intended to systematicallyverify the frequency curves and ensure their relative proper positions with regards to their modal progression.From previous work, the qualitative method applied to the isotropic rectangular plates with the support conditions (SSCC/ SCSC) and based only on the effect of the dimensions ratio (a/b) showed a good concordance with the results obtained from the FE method. In our previous works, we proposed a study based on a dimension ratio (a/b>1) and on varying the rigidity ratios (Dx/Dy) = (2, 1, (2:3), (1:2), (1:3), (1:4)).In this work we propose to globalize and validate the qualitative method by studying the case where we have a dimension ratio (a/b

    Download PDF
  15. Numerical Study Of The Compressible Flow Inside A Supersonic Nozzle To 2D

    Said Sellami, Omar Kholai

    Paper ID II-MAPESPN-10055-1424 · Pages 68-72

    Abstract

    Download PDF
  16. Intelligent Control Based Multilevel And Multiband Digital Image Thresholding Using Fuzzy Entropy And Particle Swarm Optimization

    Zhengmao Ye, Habib Mohamadian

    Paper ID II-TAEECESPN-10055-01 · Pages 73-79

    Abstract

    Download PDF