Singapore 16-12-2016
ISBN 978-93-86291-56-1
In this paper, we study the conditional intensity function (hazard function) of Weibull and Power law model for rainfall data. These models are fitted to the daily rainfall data from 2012 to 2016 obtained from Ngurah Rai station, located in Denpasar Indonesia. The maximum likelihood estimation is used to estimate the parameters of the model. The result shows that the determination of the value of the conditional intensity on a daily rainfall data indicate that the use of Weibull and Power Law models for α
Land contamination by petroleum exploration, production and discharge of waste causing serious damage to the ecosystem of the environment, human and animal. Biodegradation (bioremediation) processes have difficulty focused due to the complexity of the hydrocarbons that was adsorbed by the soil. The objective of this research was to determine the efficiency of bioremediation as a function of bacterial concentration. A method that was developed in bioremediation of petroleum-contaminated soil in addition to in-situ bioremediation was the ex-situ bioremediation with slurry phase bioreactor. The mixture of soil and water were fed in the bioreactor. The aerobic bacteria used in biodegradation of benzene, toluene, and xylene (BTX) process were Pseudomonas putida. The variables that would be measured were BTX concentration; bacterial population and operating conditions (temperature, pH and dissolved oxygen). Residues of petroleum hydrocarbon (BTX) were measured by gas chromatography method. Process was identified during 56 days in 3 bioreactors in parallel. Reactor was added by 12,5% (v/v) (A), 15% (v/v) (B)and 17,5% (v/v) (C) Pseudomonas putida bacteria. The bioreactors were agitated and aerated during bioremediation process. After 56 days, this research resulted in total degradation of BTX in reactor A reached 91,0400%; reactor B 91,1489%; and reactor C 97.6726%.
Keywords- Pseudomonas putida; bioremediation; Benzene; Toluene; Xylene; slurry bioreactor
This proposed research paper on multi cloud security is convergent on safe and secure authentication. Processing task and authorization is a relatively occupy not more accessing area, although very important for cloud security. Access controls are security features that control how users and cloud communicate and interact with other multi cloud and with other resources. Design and producing of new task for process control and authorization, specific to multi cloud environment and its security requirements forms the core of this research work. This proposed replicas for representing various processing control ingredient of cloud authorization from third party and execute algorithms to view the association between these ingredient. We proposed an multi-level authentication framework. This framework includes onetime password, team level and user level password generation authorization architectures. Multicloud dimensional security password generation algorithms doing tasking of this architecture. Where its implemented the multicloud authorization replica for team level and end user is a fine-grained level of restrictions and permissions enforcementof access control. Execute the replicas using programming techniques and inference working process.
In this paper, we propose a method to detect the error and to reduce the power loss in the constant-voltage method of EMS by measuring the user impedance. Instead of the switching feedback circuit, ADC feedback circuit is used to increase the error detection performance and power efficiency of the battery operated portable EMS circuit requiring miniaturization. Experimental works show the effectiveness of the proposed method. It is expected that our method can be extended for the body fat measurement.
Keywords- Electrical Muscle Stimulator, Constant Voltage, Power Efficiency, Error Detection, ADC Feedback
E-procurement system in the good/service procurement in Indonesia is trusted by governments as the tool to create good government and public services, since it will improve the cost efficiency, effectiveness, faster time; improve transparency; provide better public monitoring; improve healthy competition; and improve government accountability. In the implementation, e-procurement still has some obstacles and problems. One of them is occurred to local consultant service provider. This study aims to determine the application of e-procurement in every phase and to find out the obstacles faced by local consultant services provider in participating the electronically bidding and to find out the effect of e-procurement to the success of local consultant services provider. The variables used in this study are human resources management; technical aspects, including procedures to participate e-procurement bidding and technical documents; hardware and network infrastructure. The statistic analysis used is frequency analysis, reliability analysis, correlation analysis and multiple linear regression analysis. Data processing using computerized tools of software SPSS (Statistical Product and Service Solution) version 21. From the coefficient regression analysis result, it is obtained that the highest coefficient is X3 which value is 9.485; it is hardware and network infrastructure variable with significance is 0.020. It shows that the hardware and network infrastructure variable affecting the capacity level of local consultant service provider. This study result is expected to be a reference to local consultant service provider in improving local consultant service provider company quality in participating full e-procurement bidding so that it can compete with other consultant service providers locating in other area (town).
Keywords- E-procurement, Bidding, Local Consultant.
Jute and sisal fibers are the most potential natural fibers to produce composites currently used for industrial structures and as bio-materials. In the present investigation jute and sisal fibrous mat is reinforced in an epoxy matrix by manual layup technique to produce a hybrid composite. The composite is tested for tensile strength and impact strength.
The fabricated composite with [00/00] orientation of fibers exhibited higher tensile strength than that of composite with [00/900] orientation of fibers.The energy absorbing capacity of later was high than the former type of composite. The scanning electron microscopy image of thefractured specimensrevealed that de-bonding between fiber matrix interface and void nucleation growth are the major factors influencing failure of the material.
key words- jute fiber, sisal fiber, hand layup, impact and void nucleation
Application of steel demands propertiesto enhance durability, dimensional stability and flexibility to alter properties depending on application conditions. Generally to improve some of the propertiessteel is heat treated.The present work aims at experimentally investigate the effects of conventional heat treatments like annealing, normalizing and special hardening techniques like austempering and time quenching on AISI 4340 (EN24) steel. The test specimens are machined as per ASTM standards and then different tests like microstructure analysis, hardness test, tensile test, impact test were carried out after the heat treatment processes. Annealed steel is observed to be soft, normalized steel moderate hard, austempered is tough with balanced hardness while time quenched steel is hardest at the surface compared to inner core.The microstructure shows coarse grain structure in annealed, fine in normalized with finest in austemperedandmartensite structure at the surface of the time quenched specimen.An increase in brittleness was observed with the increase in hardness during time quenching displaying lesser impact strength compared to austempered one.
Keywords- Normalizing,annealing, austempering, microstructure, martensite.