Singapore, 14-06-2015
ISBN 978-93-85465-33-8
This paper proposes a neuromorphic system built with novel RRAM-based synapses. Each synapse consists of two RRAM devices of which one serves for long-term potentiation and the other for long-term depression. The RRAM devices are fabricated in-house with forming-free and continuous reset characteristics.Through a simulation tool based on the model of RRAM-based synapses, the proposed system has demonstrated the pattern recognition function with good performance.
Index Terms- Neuromorphic, Electronic Synapse, Resistive Random Access Memory (Rram), Long-Term Potentiation (Ltp), Long-Term Depression (Ltd)
Mobile Ad hoc Network (MANET) use anonymous routing protocol that hide node identities and/or routes from outside observers in order to provide anonymity protection. Some of the existing link based protocols such as Adhoc On demand Distance Vector protocol (AODV) leads to weaker security and results in performance degradation due to source trace backs. This work addresses the problem that AODV cannot achieve complete anonymity for highly dynamic mobile ad hoc networks in a secure manner. Driven by this issue, an efficient Position-based Geographic routing is proposed which takes advantage of greedy forwarding of packets to the nodes closer to the destination. Security analysis demonstrates that geographic routing can well protect user privacy against both inside and outside attackers. Geo routing uses a novel combination of group signature and id-based encryption for route recovery. Thus anonymity is preserved for source, destination and routes in a secure manner. Geo routing is implemented using Network simulator (NS-2), and evaluates its performance by comparing with AODV. The duplication results show that geographic routing has satisfactory performance compared to AODV and also achieves stronger privacy protection.
Keywords: MANET, AODV, Geographic Routing,Anonymity.
Food safety in school canteen is the responsibility of every person who involved in food service operation especially the food handlers. Awareness of food safety and food hygiene is very important in all human beings, which includes school canteen operator and food handlers. Moreover, the factor that influencing awareness, education and situation at school canteens in Malaysia in terms of food safety issues such guidelines, monitoring, awareness and campaign, also knowledge must be focused and complied from time to time by food handlers, the school canteen operator, school principal and others. Therefore, effective management of school canteens and human health with the enforcement, adoption legislation, non legislation as well as guidelines then ensure a perfect human health to address the problem of food safety in school canteens.
Keywords: Awareness, Food Poisoning, Food Safety
Manganese steel being the toughest steel commercially available is widely used in railroad rails, rock crushing machinery etc. It is characterized with high strength, ductility, toughness and excellent wear resistance in the most punishing application as well as quick work hardening. This properties makes it one of the difficult to machine materials because its machinability is usually accompanied with low productivity occasioned by high cutting force, high cutting temperature, poor surface quality and short tool life. Accordingly, the use of convectional cutting fluid is a common technique for improving machinability and has been acknowledged since early 20th century. However the environmental and health hazard associated with these cutting fluids together with developing governmental regulations have necessitated for green manufacturing system of production. In view of the above, the main work of this paper include the investigation of the effect of the machining parameters like speed, feed and depth of cut on the cutting force in the end milling of hardened 65 Manganese steel (45 HRC), with carbide end mill, under dry cutting process, using one factor at a time design of experiment (DOE). With the aid of Origin pro 8.0 software, the graphical representations of the performance indices with respect to the input parameters was presented and Response Surface Methodology (RSM) was used to analyze the performance of these parameters in respect to the cutting force. The results of Analysis of variance (ANOVA) shows that Depth of cut was the most influential factor. Accordingly, within the range of values selected for the test, the parameters were optimized and the empirical formula for the cutting force was established.
Keywords: Cutting Force, Empirical Formula, Surface Roughness, Anova, Doe, Rsm.
In almost all manufacturing processes, surface roughness plays an important role for the assessment of quality of the product. In any production process, an evaluation of the surface roughness is very essential. Many ways of measuring the surface roughness have been explored at one time or another. Some of these methods have sunk without any trace, because of the inherent disadvantages. In other cases, additional methods have been developed to deal with difficult measurement problems. The roughness of a surface cannot be easily defined by a single parameter or by any intrinsic property of the surface. The surface roughness exists in two principal planes: one at right angles to the surface, which is characterised by some kind of height, and the second in the plane of the surface, which is characterised by some kind of wavelength. Thus, there are two sets of limitations to each roughness-measuring instrument or technique: (i) the largest and smallest difference of heights, which it will resolve and (ii) the longest and shortest wavelengths, with which it copes. In this paper, various methodologies adopted in the past and at present are discussed briefly.
key words: Surface Roughness, Surface Quality