← All proceedings

155TH THE IIER INTERNATIONAL CONFERENCE

Proceedings cover: 155TH THE IIER INTERNATIONAL CONFERENCE

Amsterdam, Netherlands 09-03-2018

14 papers

  1. The Regulation of Insider Trading in Namibia: Challenges and Prospects

     |Howard Chitimira

    Download PDF
  2. Common Fixed Point Theorems in Complex Valued B-Metric Spaces

    Manjulatripathi, Anil Kumar Dubey

    Paper ID II-APMAMSTER-09038-10329 · Pages 1-3

    Abstract

    Azam et. al.(2011) introduced the notion of complex valued metric spaces and obtained common fixed point result for mappings in the context of complex valued metric space. Rao et. al. (2013) introduced the notion of complex valued b-metric space. Badshah et. al (2017) established some fixed point results for a pair of compatible mappings satisfying a rational inequality in complex valued metric spaces. In this paper, we study complex valued b-metric space and generalize the result given by Azam et. al[1] and Badshah et. al [2]

    Index Terms - Common fixed point, contractive type mapping, complex valued b-metric spaces.
    Mathematics Subject Classification: 47H10, 54H25.

    Download PDF
  3. Investigating the Factors Influencing the Flow Behavior and Performance of Condensate Gas Reservoirs

    Soroush Zarinabadi, Amir Samimi

    Paper ID II-CBEAMSTER-09038-9042 · Pages 4-11

    Abstract

    Gas condensate reservoirs have become more and more important since late 30s because of explorations and deep drilling. Development and efficient production of these tanks require engineering and operational procedures, which makes these reservoirsdifferent from oil and gas reservoirs.By comparing dry gas and gas condensate reservoirs, very important parameters can be found that have an impact on the performance of gas condensate reservoirs.Precision of engineering calculations for gas-condensate systems (e.g. wells verification, estimation of recoverable gas, wellhead equipment, etc.) necessitates a deep understanding of the phase behavior of this system as well as the relationship between gas and condensates.When the pressure drops below the dew point pressure, reduction of the productivity of the well is crucial in the development of gas condensate fields.Reduction of the pressure to below the dew point makes condensate go out of gas phase and create a saturation of condensates near the well leading to reduced production and productivity of the reservoirs.Predicting the performance of gas condensate reservoirs requires modeling of two-phase relative permeability near the wellbore and this permeability itself is a function of the change in capillary number.Better mobility of fluid because of high capillary number is the most important phenomenon that can be seen in the zone around the wellhead in condensate gas reservoirs while, non-Darcy flow which mainly occurs due to high speeds in reservoirs tend to reduce fluid mobility.

    Keywords - Condensate Gas Reservoirs, Fluid, Dew Point, Factor Productivity

    Download PDF
  4. Examining Junior High School Students’ Views of the Nature of Science and Technology

    Desri Sofiani, Ahmad Mudzakir, Hernani

    Paper ID II-PLTAMSTER-09038-10165 · Pages 12-15

    Abstract

    This study aims to examine junior high school students’ views of the nature of science and technology (NOST). The participants include 125 junior high school students in one of schools in Bandung, Indonesia. The NOST questionnaire consisted of 8 multiple choice items including four aspects: definitions of science and technology, epistemology, the internal sociology of science, and the external sociology of science. The data from the questionnaire were analyzed using frequency distribution to characterize trends in the students’ views. The results revealed that generally junior high school students had inadequate views regarding nature of science and technology. The study is of great significance to the teachers in order to emphasis the aspects of NOST in science learning.

    Index Terms - Epistemology, Nature of Science and Technology, View

    Download PDF
  5. Students’ Conceptions of the Nature of Science

    Nur Rahmah, Parsaoran Siahaan

    Paper ID II-PLTAMSTER-09038-10167 · Pages 16-19

    Abstract

    This study investigated the understanding of the nature of science of junior high school students in South Sulawesi. A cross-sectional survey method was implemented in this study. A total of 72 students were selected randomly in cluster from several schools in South Sulawesi, Indonesia. The instrument was a combination of 28 item likert scale and 7 items of open-ended questionnaires related to seven aspects: tentativeness, empirical, creativity imagination, observations and inferences, scientific theories and laws, subjectivity, and social-cultural context. The results indicated that students’ understanding of the nature of science was intermediate, suggesting that there are still possible chance for improvement.

    Keywords - Junior high school, students’ conceptions, nature of science

    Download PDF
  6. Analysis of Teacher’s Learning Design and Attitudes Towards Environmental Literacy

    Nurhayati, Hernani

    Paper ID II-PLTAMSTER-09038-10168 · Pages 20-23

    Abstract

    This research aims to analyze the learning design profile used by science teachers and explore teachers’ attitude towards environmental literacy. The type of this research is descriptive research. The subject was comprised of 35 teachers from several junior high schools in South Sulawesi, Indonesia. The sampling technique was cluster random sampling. Instruments used is an analysis sheet of environmental literacy components as well as problems adapted from Middle Schools Environment Literacy Survey/ Instrument (MSELS/ I) and teacher’s lesson plan draft. The result showed that generally teachers’ learning designs have contained the aspect of the environmental literacy. In addition, teachers had good attitudes towards environmental literacy.

    Index Terms - Attitudes, environmental literacy. Learning design,

    Download PDF
  7. Histopathology of Pancreatic Islet in Ageing Rats by Injecting Intravenously Human Wharton’s Jelly Mesenchymal Stem Cell

    Wining Astini, Alif Iman Fitrianto, Adisti Dwijayanti, Frans Dhyanagiri Suyatna, Adi Winarto, Arief Boediono

    Paper ID II-RAMSAMSTER-09038-10183 · Pages 24-26

    Abstract

    The aimed of the experiment was to know the effect of wharton’s jelly mesenchymal stem cells by injecting intravenously in ageing rats. This study used 6 ageing male rats model which had been 24 months old. The experiment consists of two treatment groups. The control group (A) that received NaCl (0.9%) 0,4 mL and group treatment (B) received 5 x 106 cells/kg of wharton’s jelly mesenchymal stem cells were injected 4 times with the interval in 3 months. The end of the experiment (12 months), the rats were anesthetized and sacrified. The pancreatic tissues were collected to examine the pancreatic islets by histopathology studies. Changes of the pancreatic islet histological structure in control and treated groups (P

    Download PDF
  8. Shadow Detection and Geo-Tagged Image Information Based Strategic Infrastructure Characterization

    E. Md. Abdelrahim, Romany F. Mansour, Abdulsamad Al-Marghilnai

    Paper ID II-RIETAMS-09038-001 · Pages 27-36

    Abstract

    Exploring the significance of geo-tagged information of a satellite image and associated shadow information in the image to enable man-made infrastructure dimensional characterization, in this paper a novel approach has been developed to estimate the height of a man-made structure accurately. Our proposed method applies shadow detection and shadow feature along with geo-tagged information retrieved through Google Earth tools, to estimate the structural dimension of the man-made infrastructure. To characterize the dimensional features of the man-made structure, we have considered Google Earth satellite images with precise and crisp edge as well as shadow length information, which have been obtained using freely available Google Earth information retrieval tool. Applying our proposed mathematical formulation, the height of man-made structures as well as neighbouring structures have been estimated which can be used for certain strategic decision purposes. The proposed method can be applicable for professionals exploring dimensional characterization of relatively low height constructions as well as defence purposes. Our proposed model has outperformed majority of existing approaches, particularly in terms of accuracy of height estimation of man-made structures.

    Keywords - Shadow Information; Satellite image; Height Estimation; Dimensional Characterization; Geo-tagged information

    Download PDF
  9. Thermal Equilibrium Assumption For Fluid Flow In Porous Micro-Channel As Described By A Hyperbolic Heat-Conduction Model

    A.F. Khadrawi, Maen Al-Rashdan

    Paper ID II-RIETAMS-09038-9682 · Pages 37-40

    Abstract

    Unsteady homogeneous composite domain thermal performance described by the hyperbolic model of heat-conduction (HHC) in porous micro-channel is investigated. A solid domain (inserts) and fluid domain (matrix), each made of dissimilar material consists a composite domain,. The parameters range of which the use of the assumption of thermally equilibrium in transient natural convection flow in porous micro-channel which is expressed by a model of HHC is described. Under the existence of the HHC model, several parameters effects on the assumption of local thermal equilibrium (LTE) are investigated.

    Key words - Heat conduction; composite; porous channel; hyperbolic model; thermal equilibrium assumption.

    Download PDF
  10. Role and Significance of Mechatronics in Machinery Production (Development of the Economic Model)

    Monzer.M.Krishan

    Paper ID II-RIETAMS-09038-10076 · Pages 41-45

    Abstract

    This article studies the role of mechatronics introduction (novations, new technologies) in the industrial field. The economic optimization model of factor dependence on mechatronics introduction, introduction efficiency, and dependence of costs on introduction is developed. The model involves close cooperation of planning and operating entities of the industrial field and science, planning of the science research depending on needs of the field, activity of introduction and use of science results and targeted training of the employees, who are able to provide the introduction and appliance of scientific achievements in practice.

    Key words- Mechatronics, innovative model, cost optimization model, mathematic economic modeling, resources distributive mechanism, interpolation, flexible resources distributive mechanism, elasticity coefficient, calculation algorithm, economic mathematic interpretation.

    Download PDF
  11. A Protein of Shigella Flexneri Circumvents Innate Immunity

    Iskandar Muda

    Paper ID II-SIMAMST-09038-10170 · Pages 46-47

    Abstract

    Shigellaflexneri is able to invade and replicate within the epithelial cells, leading to severe inflammation and epithelial damage in which the transmission process through the fecal-oral route. Epithelial cells in the intestinal tract are the first barrier that haveimmunocompetent cells to responsible for the innate immune response. However, S. flexnerysecretes virulence protein through the Type III Secretion System (T3SS) for disarming the innate immunity system. This review focus on the mechanisms of S. flexneriin manipulating the innate immunity by epigenetic regulation.

    Keywords- Innate immunity, Shigellaflexneri, OspF, T3SS

    Download PDF
  12. New Approach in Predicting Aluminum-Alloy Properties Using Neural Networks

    Suleiman Al-Lubani

    Paper ID II-RIETAMS-09038-9719 · Pages 48-51

    Abstract

    In this study the impact of alloying elements on hardness, for different series of Aluminum alloys, was analyzed and studied using a mathematical modeling tool based on Artificial Neural Networks (ANN). This new model was developed as multi-layer feed forward network with a hidden layer that can approximate any complex function and back-propagation learning algorithm. Thus, it is possible by using this model to predict properties of Aluminum alloys, in particular hardness, based on certain punch of inputs. The latter includes the weight percentage of the compositioncontents of various metals such as Cr, Cu, Fe, Mg, Mn, Si, Ti, Zn, and the Aluminum.In the current research work, several runs were made using this newly developed model, and published results of previous experimental research, available in open literature.The obtained results here were found in full agreement with those reported by other researchers. Thus, it is deemed that such model could help researchers and industries in designing the desired Aluminum alloy and predicting its hardness at no cost. Equally important is relatively high accuracy of obtained results.

    Keywords - Aluminum alloy, Alloying elements, hardness, Neural Networks.

    Download PDF
  13. The Regulation of Insider Trading in Namibia: Challenges and Prospects

    Howard Chitimira

    Paper ID II-LPSAMSTER-09038-002 · Pages 52

    Abstract

    Insider trading is treated as an offence in many countries, including Namibia. Accordingly, the paper investigates the challenges and prospects of the Namibian insider trading laws in relation to the effective combating of insider trading practices in Namibia. In this regard, an overview discussion of the enforcement duties of the Namibia Financial Institutions Supervisory Authority (NAMFISA), the adequacy of the current provisions and available penalties under the Namibia Financial Institutions Supervisory Authority Act 3 of 2001 (‘NAMFISA Act’) and other relevant legislation is provided. This is generally done to expose the flaws that are embedded in such laws while on the other hand, isolating possible measures that could remedy such flaws so as to, inter alia, enhance the integrity of the financial institutions, financial services industry and financial markets in Namibia. The paper also examines whether the insider trading prohibition that is contained in the NAMFISA Act and the Companies Act 28 of 2004 (Companies Act 2004) is robust enough to combat insider trading activities in the Namibian financial markets. Moreover, the adequacy and prospects of the anti-insider trading provisions contained in the the Financial Institutions and Markets Bill, 2012 are discussed.
    Key Terms - Insider trading, regulation, adequacy, Namibia Financial Institutions Supervisory Authority.

    Download PDF
  14. Isolation and Characterization of Antibacterial Lactic Acid Bacteria From Moroccan Fermented Table Olives.

    Kaoutarel Issaoui, Sanae Zinebi, Rajae Zahli, Iman Haoujar, Nadia Amajoud, El Ouardy Khay

    Paper ID II-NSEAMSTER-09038-10401 · Pages 53-54

    Abstract

    Lactic acid bacteria are Gram positive, anaerobic and non-sporulating bacteria; produced by fermentation of carbohydrates, lactic acid as the main end product (Khalid & others, 2011). They are among the most important groups of microorganisms used in food fermentation, and play an important role in preserving food by producing substances that inhibit the growth of pathogenic bacteria. They colonize the human digestive tract, including the colon, intestine and saliva (Tannock& al., 1990). They are generally recognized as safe for human consumption (probiotics), and contribute to enormous environmental and health benefits (Food, 2002). Several species have received a recognized presumptive safety status (QPS) given by the European Food Safety Authority (EFSA). Several criteria were used to consider new lactic acid bacteria isolates as probiotics, including tolerance to acidic conditions, cholesterol reduction potential, be non-hemolytic, have antimicrobial properties, survive during the fermentation process, and antibiotic-sensitive (non-multi-resistant) ... (Kumar & al., 2015). Resistance of lactic acid bacteria to antibiotics could be transferred to bacteria in the gastrointestinal tract and thus to pathogenic bacteria, leading to the spread of antibiotic-resistant strains (Mathur& Singh, 2005). The potential transfer of these resistant genes poses a threat to public health (Chang & al., 2009). The objective of this study was to study the antibiotic resistance of lactic acid bacteria isolated from fermented table olives in Morocco. On the basis of the results obtained, we were able to estimate the presence of resistant strains in table olives, which poses a potential risk for the health of consumers. On the other hand, isolates sensitive to antibiotics and pathogen inhibitors can be selected for their use in the food and pharmaceutical industry. From 127 samples of table olives, 114 lactic strains with antibacterial activity against Listeria innocua were isolated by the double layer method. Only 15 isolates produce the inhibitory agent by the well diffusion method. The action spectrum of the 15 isolates encompasses Gram-positive bacteria (Listeria innocua CECT 4030, Listeria monocytogenes CECT 4032, Staphylococcus aureus 25923 ATTC, Staphylococcus aureus 43300 ATCC, Staphylococcus aureus 29213 ATCC, Staphylococcus epidermidis ATCC 12228) and Gram negative bacteria (Escherichia coli CECT 25922, Klebsiella pneumonia ATCC 13883 and Salmonella typhimirium ATCC 14028). According to the antibiotic sensitivityassay(Soltani& al., 2016), LB62 strain showed sensitive to ten different antibiotics; Tetracycline, streptomycin, penicillin, rifampicin, amoxicillin, amikacin, gentamicin, erythromycin, ampicillin and chloramphenicol. LB6, LB48, LB15 and LB21 are each resistant to one of ten antibiotic. The other strains are susceptible to at least four antibiotics tested. Depending on the acidification profile, LB21 and LB8 show respectively high and low acidification rates. The temperature and time of incubation influence the growth of both lactic strains and the production of their inhibitory substances. The optimal growth temperature of the 15 strains is between 30°C and 37°C. The maximum biomass is obtained between 48h and 72h, whereas the antibacterial activity varies as a function of the incubation time and temperature.

    Key words - Table olives, lactic acid bacteria, antibacterial activity, antibiotic

    Download PDF