← All proceedings

TWELFTH TheIIER INTERNATIONAL CONFERENCE

Proceedings cover: TWELFTH TheIIER INTERNATIONAL CONFERENCE

Istanbul, Turkey, 19-02-2015

ISBN 978-93-84209-91-9

17 papers

  1. Wheelchair Control Using 3 Dof Head Gesture Recognition

    Montaser N. Ramadan, Mohammad A. Al-Khedher

    Paper ID II-MAPETUR-18025-801 · Pages 1-6

    Abstract

    Download PDF
  2. Modernization and Religion: Case Study of Ataturk and Reza Shah

    Hamid Nassaj, Morteza Bahrani

    Paper ID II-TeSSHITUR-19025-02 · Pages 7-10

    Abstract

    Download PDF
  3. Democracy And Religion; The Case of Interpretation

    Abdolamir Nabavi, Maghsood Ranjbar

    Paper ID II-TeSSHITUR-19025-03 · Pages 11-13

    Abstract

    Religious interpretations emerged in the Islamic world more than 1000 years ago through the works the significant thinkers; the question is that how religious interpretations can play role in realization of democracy? Is there any difference between Islam and Christianity in this realm? What role can be played nowadays by political religious interpretations in developments of the Islamic world and its transition to democracy? This paper argues that in this situation, and considerably in Islamic worlds, religion played an important role, depending on the interpretations: for some, it is a barrier and for others, it could help the democratic evolutions.

    Keywords- Democracy, Religion, Significant Thinkers, Democratic Evolutions

    Download PDF
  4. Prophet Muhammad (PBUH) And The Housing Planning And Development In Madinah

    Spahic Omer

    Paper ID IS-3SMTRKY-15025-003 · Pages 14-19

    Abstract

    Download PDF
  5. Science, Technology, Engineering And Mathematics Research Development In Sub Saharan Africa

    Lambo Noubasse Jean Calvin, Komming Stallon Cherrif

    Paper ID II-ABMITTUR-17025-02 · Pages 20-21

    Abstract

    The problem for much of Sub Saharan Africa: a low quality of basic education in science and math, a higher education system skewed toward disciplines like the humanities and social sciences, and low levels of international funding that focus heavily on health and agricultural research.

    Keywords- Engineering & Mathematics, STEM Research, Humanities and Social Sciences.

    Download PDF
  6. Football Sponsorship and The Battle of Nike And Adidas In 2014 FIFA World Cup

    Mihalis Kuyucu

    Paper ID II-ABMITTUR-17025-03 · Pages 22-28

    Abstract

    Download PDF
  7. Session Initialization Protocol (Sip) & Bmx6 Routing Protocol Implementation for Swarm Robotics in Disaster Management & Rescue Systems

    Ashrar Ahmed Khan Choudhury, Mozaffar Chowdhury

    Paper ID II-RACETUR-19025-800 · Pages 29-30

    Abstract

    When usual communication system is lost in disastrous situation, it is very difficult to search and rescue people and properties. Coordinated effort of search and rescue robots is very effective when it comes to disaster management & recovery systems. This paper illustrates the coordination between search & rescue robots, how they can react with each other, with the environment, and with the victims to be rescued using swarm robotics. Specially, we have observed and developed patters and communication system using Fire Ants reaction and commutation system when fire breaks-off in their community (how they manage disaster and rescue themselves from the initial damage).

    Keywords- Swarm Robotics, Artificial Intelligence, Sip, Bmx6, Distance Vector Algorithm, Real-Time Protocol (RTP).

    Download PDF
  8. Learning Interface For E-Learning

    Md. Ashekur Rahman

    Paper ID II-TAEECETUR-18025-01 · Pages 31-35

    Abstract

    This system is an artificial intelligence entity, with the power of natural language processing, as a virtual teacherfor learning and assessment of statistical inference, available through the Internet for student use.It has a logical reasoning engine and uses two knowledge bases, one for statistical inference and the other for rules of Englishgrammar and general knowledge to facilitate learning. Thesystem is called Learning Interface for E-Learning (LIEL). It provides lessons in inferential statistics. The user can ask questions in English and have a dialogue with virtualteacher. The system answers the questions or asks forclarification regarding what is required from it. It searches its knowledge bases(KB), uses its first order predicate logicreasoning engine and converses with the student using itsNatural Language Processing (NLP) sub-system. It is aimed to provide a multimedia experience. The system uses the following programming languages for itsdifferent functions: AIML for knowledge base, Prolog forreasoning, HTML and Java script for web client, Java for web server and AIML interpreter and Linux shell script forcommunication.This system has potential applicationsoutside academicenvironment such as web-based online marketing and helpdesk diagnostics in different sectors and can be used as assistantlecturer for other courses and subjects by changing itsknowledge-base.

    Keywords- Education and Information Systems -Computer -Assisted Instruction -Artificial Intelligence -Conversational -Robots -Natural Language Processing.

    Download PDF
  9. Frequency Domain Analysis of the Quadruple Tank System

    Paper ID II-TAEECETUR-18025-04 · Pages 36-41

    Abstract

    Multivariable systems exhibit complex dynamics because of the interactions between inputs and outputs. The quadruple-tank process has been widely used for control education to present many concepts in multivariable control, such as performance limitations due to multivariable right half-plane zeros or input-output pairing problems. This paper discusses the frequency dependent relative gain array, relative gain array number and Nyquist array plots for the quadruple tank system and addresses diagonal dominance and pole assignment problems.

    Key-Words: -Quadruple Tank System, Relative Gain Array, Relative Gain Array Number Plot, Pole Assignment

    Download PDF
  10. Enhancement of Fast Pedestrian Detection Using Hog Features

    Ahmad Baghdadi, Suhaimi Abd Latif

    Paper ID II-TAEECETUR-18025-677 · Pages 42-46

    Abstract

    Histograms of Oriented Gradients (HOG) suffers low processing speed, due to complex and redundant computations. In this paper, a method to improve the speed of detection while maintaining the accuracy has been proposed. This is implemented without using any special purpose hardware such as GPU. The speed has been substantially increased through the calculations of trilinear interpolation within each block of cells, utilizing the sub-cell method. The redundant calculation over two levels has been avoided: within each block and within the detection window by utilizing the concept of reusing the calculated features. Results showed a significant speed up by more than eleven times, with almost the same detection accuracy of the original algorithm.

    Keywords- Pedestrian Detection, HOG, Fast Method

    Download PDF
  11. Ratoward Mobility-Based Surveillance Model For Static Multi-Targets

    Shihab A. Hameed

    Paper ID II-TAEECETUR-18025-780 · Pages 47-50

    Abstract

    Download PDF
  12. Cutting Temperature In High Speed Milling of Silicon Carbide Using Diamond Coated Tool

    Mohammad Iqbal, Mohamed Konneh, Mohd Hanafi Bin, Kassim Abdulrahman Abdallah, Muhammad Faruq Bin Binting

    Paper ID IS-RAETTRKY-14025-1 · Pages 51-55

    Abstract

    The present research studies the high speed milling process of Silicon Carbide, using diamond coated tool. The effect of machining parameters such as cutting speed, feed rate and depth of cut on the cutting temperature were investigated. The experiments were conducted under dry condition with two flute diamond coated flat end-mill of diameter 2 mm, using different spindle speeds (between 30,000 and 50,000 rpm), different feed rates (between 6 and 60 m/min), and different depth of cuts (between 0.05 and 0.1 mm). Experimental results indicated that all the milling parameters influence the cutting temperature. Cutting temperature increases with the increase of cutting speed at higher depth of cut, but decreases at lower depth of cut. Increasing feed rate will increase cutting temperature at any conditions. Meanwhile, increasing depth of cut will increase cutting temperature at lower feed rate, but decrease cutting temperature at higher level of feed rate. As the conclusion, the combination of high spindle speed with low feed rate and low depth of cut minimizes cutting temperature developed in high speed milling of SiC with diamond coated tool.

    Keywords- Cutting Temperature, High speed milling, Silicon Carbide, Diamond Coated Tool.

    Download PDF
  13. Feature Selection In High-Dimensional Datasets using Cuckoo Optimization Algorithm

    Mahmood Moghadasian, Seyedeh Parvaneh Hosseini

    Paper ID IS-RAETTRKY-14025-0059 · Pages 56-59

    Abstract

    Feature selection is a process commonly used in machine learning. Based on Binary Cuckoo Optimization Algorithm (BCOA) and information theory, this paper proposes a new filter feature selection method for classification problems. The proposed algorithm is based on BCOA and the Mutual Information (MI) of eachpair of features, which determines the relevance and redundancy of the selected feature subset. Different weights for the relevance and redundancy in the fitness functions of the proposed algorithm are used to further improve their performance in terms of the number of features and the classification accuracy. In the experiments, an Artificial Neural Network (ANN) is employed to evaluate the classification accuracy of the selected feature subset on the test sets of six datasets. The results show that proposed algorithms can significantly reduce the number of features and achieve high classification accuracy in almost all cases.

    Keywords- Feature Selection, Mutual Information, Binary Cuckoo Optimization, Filters.

    Download PDF
  14. Sharıng of Compass Sensor Data Over Network In Wıreless Sensor Networks

    Murat Dener, Cevat Bostancioğlu

    Paper ID IS-RAETTRKY-14025-0064 · Pages 60-63

    Abstract

    Wireless Sensor Networks are very popular and applicable new technology in many fields in recent years. Data can be collected interactively with the environment using Wireless Sensor Networks, these data can be collectively evaluated and when needed, changes can be made on the environment, based on the data. In most of the applications implemented nowadays, similar sensors are available on many devices close to each other. When the sensor data are needed in another device and no sensor is available on the device, the device cannot receive the sensor data. With this study, sending of information of the compass sensor from any device to the target device over Zigbee technology has been achieved.

    Keywords- Wireless Sensor Networks, Zigbee, Sensor Nodes, Compass, Common Use of Sensors, Detection of Direction

    Download PDF
  15. Utilization of Landfill Gas For Energy Production And Relevant Technology Options

    Majlinda Alcani, Lorenc Malka

    Paper ID IS-RAETTRKY-14025-095 · Pages 64-70

    Abstract

    Landfill biogas (LFG) is a natural byproduct of organic material anaerobic decomposition in municipal solid waste. LFG mostly contains 50 % methane and 50 % carbon dioxide with less than 1 %nonmethane organic compounds and trace of inorganic compounds (although the methane and carbon dioxide ratio depends on the type of refuse being disposed of. LFG is e potent heat trapping gas, but on the other hand, instead of escaping into the air, LFG can be captured and used as an energy source. This second way of LFG utilization would provide a lot of environmental and economic benefits. This paper estimates the potential of landfill gas recovery of the landfill of Tirana city and a short review of technology options used to recover energy by it producing heat and power.

    Keywords- Landfill Biogas, Potential of Energy Recovery, Technology Options.

    Download PDF
  16. Low Voltage CCII Techniques Composite Transistor and bulk Driven

    Issa Eldbib, Abdosllam M. Abobaker, Abdulaziz H. Daw

    Paper ID II-TAEECETUR-18025-05 · Pages 71-74

    Abstract

    To proof low voltage techniques are valid in current conveyor design, Bulk driven and composite transistor (self cascode) techniques are used to get high performance results from CCII in low voltage supply. Conventional operational amplifier circuit from literature was our choice as core of the design. Our Focus with using low voltage techniques is study the frequency characteristics of a CCII based miller compensated operational amplifier. Orcade 9.2 and 0.7 m CMOS process model from AMIS used for simulation.

    Keywords- Self Cascode; Bulk Driven; Low Voltage Current Conveyor; CCII; Current Conveyor Techniques.

    Download PDF
  17. Ensuring Of Safe Transport Of Goods And Cargos And Monitoring Of Vibration Levels Using Wireless Sensor Networks

    Murat Dener, Cevat Bostancioglu

    Paper ID II-TAEECETUR-18025-03 · Pages 75-78

    Abstract

    Download PDF