New York, USA 23-10-2015
ISBN 978-93-85832-18-5
Today, global energy demand and the importance of sustainable environment are growing rapidly. Thus, producing fuel-saving and energy-efficient vehicles in the automotive industry has become a priority target. While becoming conscious of consume fuel, reducing the weight of the vehicle for fuel saving have been studied and shown to be necessary. Much effort is currently being aimed at reducing the weight of vehicles in order to improve fuel efficiency and to reduce greenhouse gas emissions. The automotive industries visualize that a multi-material vehicle parts are one of critical factors to succeed this aim. It can be achieved by replacing materials with high strength steel and aluminum alloys in the vehicle. It must be done without compromising the performance or the safety of the vehicle by using an appropriate material at the right position.
The future opportunities for new lightweight vehicle parts have been investigated by using topology optimization methods. And also finite element analyses (FEA) is an important tool for achieving it since it decreases prototyping costs and time. Vehicles have different door systems and one of the important parts of them is hinge. Door hinges are a key product in the automotive industry. The function of automotive door hinge is not only to close, open, and keep the open angle of the door but also to reduce traumas for passengers in the car when a vital accident occurs. An automotive door hinge is mainly composed of four elements, mobile part, fixed part, hinge body and link. In this study, an approach for FEA and re-design process for automotive door hinge link is presented. Hinge link is made of mild steel, currently. Structural analyses are applied on hinge link by using Hyperworks. The boundary conditions, which are used in the analysis, are determined according to the data from test bench. After evaluation of the FEA results, this part was manufactured by aluminum alloy with the same design for lightweighting. The new prototype hinge link was performed fatigue test and failed. Besides, FEA results showed that higher stress occurred on it. Therefore, the hinge link was completely re-designed by using topology optimization methods. Topology optimization was performed in solidThinking Inspire. By applying topology optimization three different models were created. The most strength design was selected accordingly the FEA results. To verify the analyses results prototype hinge link was conducted fatigue tests. The results indicated that, the new design of the hinge link which made of aluminum provided the desired safety condition and nearly 60% weight reduction was achieved.
In this paper, a systematic approach for optimization of thermal insulation thickness used in external walls was developed. The optimization model was based on the life cycle cost analysis using present worth method. The heat losses and the heating energy requirement of a prototype building were calculated by using degree-days utilizing long-term meteorological temperature data. The total cost, including heating cost, insulation material cost and installation of insulation cost, was calculated, and the cost curves were obtained for different fuel types to determine the optimum insulation thicknesses. The results show that the optimum thermal insulation thickness varied between 4.2 and 10.3 cm depending on fuel types. Moreover, the optimum insulation thickness varied more dramatically between 1.6 and 18.5 cm with different degree-days.
Keywords - Life Cycle Cost; Optimum Thermal Insulation Thickness; Energy Savings.
This paper presents a new small electrically antenna rectangular X- band micro-strip patch antenna loaded with material Rogers RT/duroid 5870 (tm). The present discussion focuses on small Electrically antenna which are electrically small compared to wave length the performance of electrically small antenna are closely related to their electrical size, the gain can be increased to maintain the efficiency of the radiator. Basically micro-strip Patch antennas have been used in satellite communications and for their good characteristics such as lightness, low cost, and so on. Here in the design H- shape folded dipole, which increase the band width of the antenna.
Keywords - Electrically Small Antennas, X-Band Application, Antenna, Micro-Strip Patch, Frequency Antenna, Feed, Gain.
In this research, a framework is to be proposed to model the safety performance in construction sites. Determinants of safety performance are to be defined through extensive literature review and a multidimensional safety performance model is to be developed. In this context, a questionnaire is to be administered to construction companies with sites. The collected data through questionnaires including linguistic terms are then to be defuzzified to get concrete numbers by using fuzzy set theory which provides strong and significant instruments for the measurement of ambiguities and provides the opportunity to meaningfully represent concepts expressed in the natural language. The validity of the proposed safety performance model, relationships between determinants of safety performance are to be analyzed using the structural equation modeling (SEM) which is a highly strong multivariable analysis technique that makes possible the evaluation of latent structures. After validation of the model, a safety performance index assessment tool is to be proposed by the help of software. The proposed safety performance assessment tool will be based on the empirically validated theoretical model.
Keywords - Fuzzy Set Theory, Safety Performance Assessment, Safety Index, Structural Equation Modeling (Sem), Construction Sites.
Magnetic propertiesand structureof Ni3Al single crystal alloying with chromium and iron after high temperature superplastic and plastic deformations at 1123 K and 1423 K, respectively have been investigated. Twins and high density of the dislocations were found in the zone of fracture of the alloy after plastic deformation. Dynamic recovery was found as a basic mechanism of relaxation in the alloy under superplastic deformation. By the analysis of the magnetic properties, it is suggested that superplastic deformation does not introduce a composition disorder in studied alloy.
Keywords - Ni3Al, Magnetic Properties, Superplastisity, Defects.
In this competitive world of marketing, every organization performs to sustain, thrive and grow in the business environment. Organizations exist for achieving certain objectives. The objective was to earn money through profit making. The profit can be generated through the effective marketing. Thus marketing was an essential activity for every organization.
Most of the Management Institutes were run by private owners for educational quality enhancement, employment generation, branding of their educational institute and to earn money. Therefore, they also did marketing for branding their professional course like MBA.
In this research work, an attempt had been made to get an overview of Social Media as a marketing tool & it is suggested to be adopted by management institutes by focusing on the relevant marketing strategies for attracting the students to enroll and to recommend effective marketing methods to brand their organization.
In order to have better understanding of the facts, this topic was selected for the study.
The aim of this research was to obtain new insights into the Social Media marketing of Management Institutes and to study the current problems and opportunities for suitable follow-up actions.
The objective of the research was to study the current marketing strategies adopted by the Management Institutes in Maharashtra and to suggest effective tools of marketing to brand their positions in the educational industry.
This research had been conducted in overall Maharashtra State of India as there were 389 Management Institutes in Maharashtra, the research had been done by selecting the 95 responding institutes (and for each institute 1 Director, 1 Management, 4 faculties, 4 students were the respondents) from the metropolitan cities of Maharashtra like Mumbai, Pune, Nagpur, Nashik and the emerging and developing cities in the field of Management education like Aurangabad, Nanded and others. The research had been focused on the success of management educational institutes and the different marketing strategies used by them.
This paper oriented to compare the socio-economic indicators of the Central Asian countries during the two decades of independence from the USSR. Central Asian Countries has been begun transitioning from planned economy to a market economy since collapsing of the Soviet Union in 1991. During the last 20 years of the transition period the socio-economic life of the region changed thoroughly. The main tasks of these countries were to stop declining of national economy, which accompanied with destroying economic cooperation among former socialist countries, to create new typical economic model for transition to a market economy, to improve the livelihood of the population and provide food security. This paper analysis the socio-economical potentials of the CAC, development of the agricultural sector and its response to population growth for purpose to meet the expected demand for food without significant increases in prices. The more detail in this paper analyzed the economic growth, population dynamics, human capital, agriculture`s response to demand growth.
Keywords - Central Asia, Transition, Market Economy, Food Security, Economic Growth.
We present a simple static labor supply model with endogenous asset choice. Then, we examine how tax avoidance through asset trading affects the labor supply response and the excess burden of income tax. Furthermore, we discuss the implications of the tax policy analysis and show that a failure to account for avoidance responses may lead to errors when estimating how tax reform affects labor supply and the welfare cost of taxation. Because of tax avoidance through tax arbitrage, the progressivity of a given tax system will be less than what the formal tax system implies.