← All proceedings

37TH THE IIER INTERNATIONAL CONFERENCE

Proceedings cover: 37TH THE IIER INTERNATIONAL CONFERENCE

Saint Petersburg, Russia, 25-09-2015

ISBN 978-93-82702-02-3

14 papers

  1. Minimization Of The Fuzzy Variance For The Portfolio Selection: Theory And Application On The Turkish Stocks

    Celal Barkan Guran, Oktay Tas, Aysun Guran

    Paper ID II-APMRUS-25095-01 · Pages 1-5

    Abstract

    Download PDF
  2. Fabrication Of Ternary Metal Sulfide Quantum Dots Loaded On Molecular Sieves As A Photocatalyst

    Afshin Pourahmad

    Paper ID II-APMRUS-25095-2287 · Pages 6-11

    Abstract

    The synthesis of ZnCdS nanomaterial in MCM-41 matrix has been realized by chemical synthesis between MCM-41, ZnCl2 and CdCl2 via an ion exchange method in aqueous solution. X-ray diffraction analysis (XRD), diffuse reflectance spectroscopy (DRS), transmission electron microscopy (TEM) and fourier transform infrared (FT-IR) were used to characterize the products. Several parameters were examined, catalyst amount (0.1-6 g L-1), pH (3-12) and initial concentration of MB (0.16-3.2 ppm). The extent of degradation was estimated from the residual concentration by spectrophotometrically. The average size of ZnCdCl2 in MCM-41 nanostructure was obtained about 3 nm by TEM.

    Keywords - Nanocomposite, Nanocatalyst, Methylene blue, Water Treatment, X-ray diffraction, Infrared spectroscopy

    Download PDF
  3. Silver Nanoparticles In Montmorillonite And Antibacterial Activity

    Shabnam Sohrabnezhad, Afsaneh Saifi

    Paper ID II-APMRUS-25095-2290 · Pages 12-15

    Abstract

    The Ag-MMT nanocomposite, formed from AgNO3/MMT suspension. AgNO3 and Urtica dioica leaf extract were used as a silver precursor and reducing agent, respectively. The nanocomposite was characterized by x-ray diffraction (XRD), fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), and UV-Vis spectroscopy. The XRD showed intercalation of Ag nanoparticles (Ag NPs) into the clay interlayer space. The UV-Vis indicated a strong surface plasmon resonance (SPR) absorption band in the UV region, resulting from metallic Ag NPs. The intensity of the SPR band increased with time in the AgNO3/MMT suspension. But the results was opposite in case of Ag+ solution. The stability of Ag NP in MMT was more than without support. These results showed that Ag NPs can be used as effective growth inhibitors in different biological systems.

    Keywords - Montmorillonite; Surface plasmon resonance; nanocomposite; Biomaterials.

    Download PDF
  4. Analysis And Comparison Of The Tracking Systems Of Solar Installations

    D.SH. Akhmedov, D.I. Eryomin, N.I. Yagfarova, I.T. Nurlybaeva

    Paper ID II-RIETRUS-25095-2256 · Pages 16-17

    Abstract

    This article discusses the tracking systems of solar plants. Overviews of existing monitoring systems, a comparative analysis of the tracking systems of solar plants through solar tracking on schedule and on the basis of the counter are presented.

    Index Terms- System Of Tracking The Sun, The Solar Thermal System, Solar Cells (Sc), Solar Power, Solar Photovoltaic Power Plant (SPPP)

    Download PDF
  5. Study Of Potential Use Of Spacecraft As Reflecting Objects

    Yeremin D.I., Ponyatov YU. A., Kemesheva D.G.

    Paper ID II-RIETRUS-25095-2337 · Pages 18-20

    Abstract

    The authors of the article analyze distribution of artificial space objects in Earth orbits according to the main parameters, such as altitude, inclination and eccentricity. The algorithm of constructing ground track of specified spacecraft orbit has been developed. Potential use of artificial spacecraft as reflecting objects which can scatter or reflect radio waves has been studied.

    Keywords- Space Objects, Radio Communication, Ground Track, Reflected Radiation.

    Download PDF
  6. The Relevance Of Commodities In The Investment Strategies Of A Portfolio

    Eliana Angelini

    Paper ID II-SSERUS-26095-2229 · Pages 21-26

    Abstract

    Download PDF
  7. Removal Of Direct Green 26 Dyefrom Aqueous Solutions Using Eggshell

    Asghar Alizadehdakhel, Adineh Doagouyshalkouhi

    Paper ID II-APMRUS-25095-2384 · Pages 27-30

    Abstract

    Biosorption of directgreen 26 dye(DG 26) onto eggshells as a new and potential biosorbent havebeen studied. Batch biosorption studies were conducted to evaluate the effect of various parameters suchas contact time, temperature, pH, initial dye concentration, and biosorbent dosage on theremoval of DG 26. Adsorption isotherm data were fitted to the Freundlich isotherm and the model parameters of the have been determined. The results showed that it took about 30 minutes for the process to reach the equilibrium state. The optimum temperature and pH for removal of DG 26 was 10 and 45ᵒC, respectively. In addition, the effects of dye concentration and adsorbent dosage on the process were discussed. It was concluded that eggshell is potentially a good adsorbent for removal of DG 26 from wastewaters.

    Keywords - Dye, Removal, Adsorbent, Eggshell

    Download PDF
  8. High Temperature Corrosion Of 310S Austenitic Stainless Steel In CO2/HCL Environment

    Tosapolporn Pornpibunsompop, Purit Thanakijkasem

    Paper ID II-RIETRUS-25095-2332 · Pages 31-33

    Abstract

    High temperature corrosion of SUS 310S austenitic stainless steel was investigated comparatively in CO2 and HCl/H2O environment at 900⁰C. The thickness of corrosion layer in case of CO2 surrounding was thinner than HCl/H2O environment because of protective chromium oxide layer formation. The corrosion layer of HCl/H2O environment was porous and weak caused by water vapor leading to intergranular corrosion and intermetallic compounds (oxide, chloride, carbide)

    Index Terms ─ High temperature corrosion, austenitic stainless steel

    Download PDF
  9. VLSI Implementation of Area Optimized ALU Using GDI Technique

    Akshay Dhenge, Abhilash Kapse, Sandip Kakde

    Paper ID IACEEENAG-1603-226 · Pages 34-38

    Abstract

    The purpose of this paper is the designing and implementation of an Arithmetic Logic Unit (ALU) using certain area optimizing techniques such as complementary & Gate-Diffusion-input (GDI). The main sub-blocks of ALU are Adder, Substractor, shifter and Logical Block. This work evaluates and compares the performance and optimized area of ALU with Static CMOS technique and GDI technique in 250nm CMOS (1P5M-1 Poly 5 Metal) process technology. Simulations are performed by using Tanner EDA 13.2 tools using model file 250nm CMOS technology. At first, using Tanner 13.2 EDA S-Edit Tool, the circuits are implemented with Static CMOS technology and then with GDI techniques. Simulations results validate the proposed concept and verify that GDI technique decreases the area used by ALU and increase the speed of ALU.

    Keywords- ALU, GDI, CMOS, Low Power, Power Dissipation, Optimized ALU.

    Download PDF
  10. Design Pid Controllr Using Dynamic Programing Algorithm Techniques Under Matlab/Simulink Applied To A Real Plant

    Adel A M Abosdel, Ahmed Jaber Abougarir

    Paper ID II-ICE2CSM2EHYD-12074-225 · Pages 39-44

    Download PDF
  11. Mechanical Behavior And Dry Sliding Wear Response Of Al-Si-Sic Particulate Composite

    Pavan Kumar, Sanjay Soni, R. S. Rana, Alok Singh

    Paper ID IR-ICCSMEGOA-13074-239 · Pages 45-53

    Abstract

    Download PDF
  12. Improving The Resting State Efficiency Of E-Learning Process By Using Web Content

    Ana Savic, Vitomir Radosavljevic, Nikola Slavkovic

    Paper ID II-SIMRUS-26095-2449 · Pages 54-57

    Abstract

    In order to personalize the e-learning process, it is necessary to model the students in terms of their characteristics and habits of learning, interests, desires, motivations and expectations. Modeling of students can be defined as the process of gathering relevant information, to note the current cognitive state of students, in order to be useful and usable in a system of e-learning, all for the purpose of adapting the system to the Student. In this paper, we presented our case study, using VARK questionnaire, completed by 81 students of ICT College Belgrade, Serbia, to determine whether there is a connection between the certain types of learning and active holidays, or certain types of learning and rest breaks in learning. The aim of this paper is to contribute in improvement of teaching systems at Universities, by defining the resting state efficiency in e-learning.

    Index Terms- E learning, teaching systems, modeling of students, resting state

    Download PDF
  13. The Modern Software Analytical Platforms For Stock Market Management

    Nikola Slavkovic, Ana Savic

    Paper ID II-SIMRUS-26095-2450 · Pages 58-61

    Abstract

    Modern business environment, in combination with information technologies creates a need for new ways of managing. Software solutions now represent the standard for a wide range of activities of business users. Gathering the information at any time, and from any place in the context of the characteristics of each platform, should provide high-quality and reliable customers. This is especially true in stock market operations where changes occur on a daily basis and when accessibility and ways to display data directly affect the outcome of business. Identified world level quality data and charts in real-time, the scaling up of informing clients, enhancing liquidity and profitability, attracting a large number of new customers and connect them in the country and the world, are the main features of modern software professional platform. In this paper we analyzed the possibilities to create the main indicators for the modern software analytical platform that allows monitoring and analysis of market data around the world.

    Index Terms- Stock Market, Software Analytical Platform, Main Indicators

    Download PDF
  14. Mehrdadafshoon, Parviztalebzadeh

    Paper ID II-SSERUS-26095-2356 · Pages 62-65

    Abstract

    Download PDF