← All proceedings

29TH THEIIER INTERNATIONAL CONFERENCE

Proceedings cover: 29TH THEIIER INTERNATIONAL CONFERENCE

London, United Kingdom, 12-07-2015

ISBN 978-93-85465-50-5

14 papers

  1. SFTA Feature Descriptor for Matching Optical and Sketch Photo Image

    N. Karthikeyan, P.Shanmugam

    Paper ID AS-ICACSITCMB-20124-225 · Pages 1-6

    Abstract

    This paper presents a novel approach to address the representation issue and the matching issue in face recognition (verification). Face recognition has gained a widespread attention due to its potential application values as well as theoretical challenges compared with other biometrics. The major difficulty lies in face recognition is modality gap may occur, texture, and shape in the sketch face image and corresponding optical face images because they are different dimension, resolution, memory size, etc. In order to recognize face sketch through face photo database is a challenging task for many reaches because face photo image in training set and face sketch image in testing set have different modality, texture and shape is main difficulty for recognition. It may also deals with many crimes occur when none of such information is present, but instead an eye witness of the crime is available in such situation a forensic artist is found used to work with the witness or the victim in order to draw a sketch that depicts the facial appearance of the culprit according to the verbal description such as sketch drawn depending on the description given by an eye witness is called forensic sketch.

    Download PDF
  2. Benefit-Function of Two- Identical Cold Standby Fuel Cell Technology System Subject to Failure of Fuel Cell Operation Due to High Temperature, Pressure or Relative Humidity of Reactant Gas

    Dr. Ashok Kumar Saini

    Paper ID IC-EECETIRU-20124-407 · Pages 7-12

    Abstract

    The main objective of the Chemical Sources of Energy Programme is the development and applications of fuel cell technology which produces electricity, water and heat through reaction between hydrogen and oxygen/air. The fuel cell technology offers high conversion efficiency, modularity, compactness and noise-free operations. Fuel Cells are environmentally benign. Hydrogen is the primary fuel for fuel cells. Other fuels can also be used to produce hydrogen gas with the aid of reformers. Because of modular nature, fuel cells are ideally suited for de-centralized power generation and for automotive application. Prototypes of polymer electrolyte membrane or proton exchange membrane fuel cells (PEMFCs) and phosphoric acid fuel cells (PAFCs) have been developed in kW size in India. The applications of these prototypes have been demonstrated for power generation (PEMFC & PAFC) and transport sectors (PEMFC).A fuel cell-battery hybrid vehicles with indigenously developed PEMFC stack of 10kW had undergone field performance evaluation. Efforts made are expected to lead to the indigenous production and wider applications of fuel cell systems in the country. This programme focuses on development and demonstration of fuel cells, which produce electricity, water and heat through reaction between hydrogen and oxygen/air. Hydrogen is the primary fuel for fuel cells. Hydrogen for fuel cells can be produced by reformation of other fuels. It can also be produced from coal and biomass and by electrolysis of water. Renewable energy sources and nuclear energy can also be used for production of hydrogen. Because of their modular nature, fuel cells are ideally suited for distributed power generation. Small fuel cell power packs can be used for power generation by industrial and residential users. Fuel Cells are emerging as power sources for automobiles. A 10 kW PEMFC has been used in a prototype vehicle developed in India, in addition to a battery bank. Efforts are being made to develop indigenous technology for production of fuel cell systems in the country. The widespread use of fuel cells for power generation, transport and other applications is expected to reduce dependence on scarce fossil fuels and help in preserving the environment. In this paper we have taken failure of fuel cell operation due to high temperature, pressure or relative humidity of reactant gas. When the main unit fails then cold standby system becomes operative. Failure of fuel cell operation due to relative humidity of reactant gas cannot occur simultaneously in both the units and after failure the unit due to high temperature; pressure undergoes very costly repair facility immediately. Applying the regenerative point technique with renewal process theory the various reliability parameters MTSF, Availability, Busy period, Benefit-Function analysis have been evaluated.

    Keywords- Cold Standby, Failure of Fuel Cell Operation Due to High Temperature, Pressure or Relative Humidity of Reactant Gas, First Come First Serve, MTSF, Availability, Busy period, Benefit -Function.

    Download PDF
  3. Modified Design of Low-Power High Speed Truncation-Error-Tolerant Adder And Its Application in Digital Signal Processing

    Anna Johnson

    Paper ID IR-ICASETTRIVAN-21124-226 · Pages 13-20

    Abstract

    In modern VLSI technology, the occurrence of all kinds of errors has become inevitable. By adopting an emerging concept in VLSIdesign and test, error tolerance (ET), a novel error-tolerant adder (ETA)is proposed. The ETA is able to ease the strict restriction on accuracy, and at the same time achieve tremendous improvements in both the power consumption and speed performance. One important potential application of the proposed ETA is in digital signal processing systems that can tolerate certain amount of errors.Thus by modifications, we can reduce power,delay and area.

    Download PDF
  4. Comparison & Analysis of Load Balancing Algorithms In Cloud Environment

    Surabhi Gupta, Uday Moghe, Utkarsh Atre, Yashasvi Wadhwani

    Paper ID IR-ICCSMEGOA-21124-226 · Pages 21-24

    Abstract

    Cloud Computing is a term referred for the services provided by the third parties to the users which are flexible and on demand self services. It is basically based on the distributed system architecture where the servers included in the service, requires an efficient load balancing technique in order to provide uninterrupted responses. Load balancing algorithms decides the allocation of the server as per the process. Thus, efficient load balancing is a major challenge encountered by every cloud service provider. This load balancing can be achieved through existing scheduling algorithms. The aim of this paper is to analyze the efficiency of these existing algorithms as compared to the proposed queuing algorithm.

    Keywords: Cloud Computing, Load balancing, Algorithm

    Download PDF
  5. Analysis and Detection of Multiple Malicious Java Applets Based on Static Code Analysis: A Survey

    Sapana Y. Salunkhe, Tareek M. Pattewar

    Paper ID IR-ICCSMEPUNE-21124-226 · Pages 25-29

    Abstract

    Malicious web content is a major attack vector on the Internet. Typically, the attacker's goal is to install and run a piece of malware on the victim's computer. The research community has not given to this problem the attention it deserves, and, the approaches to the detection of malicious Java applets are based either on simple signatures or on the use of honey-clients, which are both easily avoided. The proposed novel approach to the detection of malicious Java applets based on static code analysis. The approach extracts a number of features from Java applets, and uses supervised machine learning to produce a classifier. This approach is able to detect both known and previously-unseen real-world malicious applets. We can extend our analysis to consider multiple applets that appear on the same web page together.

    Keywords- Code obfuscation, Disassembly, Honeyclients, Malicious Web Content.

    Download PDF
  6. Sequential Positive Pressure Ventilation For High-Rise Fires

    Prabodh Panindre, Sunil Kumar

    Paper ID IR-ICCSMEPUNE-21124-228 · Pages 30-36

    Abstract

    Positive Pressure Ventilation (PPV) is a firefighting tactic that can mitigate the spread of fire and the combustion products to improve the safety of firefighters and civilians in wind-driven high-rise fires more than without PPV. In complex high-rise structures with multiple stairwells, the efficacy of PPV operation is greatly influenced by the fire location, fan deployment tactics, ventilation and fire-attack points which can drastically change the fire behavior. This paper describes a simulation-based study to analyze the influence of these parameters on the performance of PPV operation in complex high-rise structural fires. The results obtained provide qualitative trends for the effectiveness of PPV with respect to concerned parameters and establish the guidelines for sequentially ventilating the heat and smoke to reduce the thermal hazards to firefighters.

    Keywords- Fire Prevention and Safety; Fire Department of New York City (FDNY); Modeling, Simulation, and Optimization of Firefighting Procedures; Positive Pressure Ventilation.

    Download PDF
  7. Performance Analysis of Three-Phase Three-Wire Voltage Source Inverter Based Unified Power Quality Conditioner

    M.S.Priyadarshini, M.Sushama

    Paper ID IR-ICEECSMECNNI-21124-226 · Pages 37-41

    Abstract

    The performance analysis of three phase three wire voltage source inverter based unified power quality conditioner (UPQC) with a control configuration is implemented in this paper. UPQC is utilized for power quality improvement at distribution level. The operation of UPQC combines the operations of series component Dynamic Voltage Restorer (DVR) and shunt component Distribution Static Compensator (DSTATCOM) together. The series component of the UPQC inserts voltage so as to maintain the voltage at the point of common coupling balanced and free of distortion. Simultaneously, the shunt component of the UPQC injects current into the system such that the currents entering the bus to which the UPQC is connected are balanced sinusoids. Both these objectives must be met irrespective of unbalance or distortion in either source or load sides. When UPQC is used in a power distribution system, the series and shunt active filters of the UPQC are made to operate in an effective and efficient unified manner. The control strategy should be able to reduce the negative effects of the variations in distorted supply voltage and the nonlinear load current. The control signals, generated by the various functional modules of the control design circuit Discrete Proportional IntegralController. Phase Locked Loop and Discrete Pulse Width Modulation Generator, will be the switching schemes for the series and shunt active filters of the UPQC to provide simultaneous shunt and series compensation in a power distribution system. The validation of performance analysis of three phase three wire voltage source inverter based unified power quality conditioner is verified through simulation inMatlab.

    Keywords- Compensation, Distribution Static Compensator, Dynamic Voltage Restorer and Unified Power quality Conditioner.

    Download PDF
  8. Wind Power Generation

    Jyoti Wavhal, Rachana Kulkarni, Prasannati Kulkarni, Sheetal Gore

    Paper ID IR-ICEERPUNE-21124-225 · Pages 42-48

    Abstract

    Renewable power generation systems have been recently getting more and more attention due to the cost competitiveness, and are environment friendly as compared to the fossil fuel and nuclear power generation. Besides the conventional renewable power generation such as hydro and pumping storage, wind power generation has been considered as the most cost effective with developing potential. The increase of unit size and enhancement of performance with higher loading factor and reliability have made wind power generation more attractive and its unit generation cost becomes very competitive as compared to traditional fossil generation. The main objective of most of the wind energy systems is to extract the maximum power available in the wind stream. However, the wind regime varies continuously and thus the system controllers should be updated to follow these variations. This paper is intended to apply fuzzy logic control techniques to overcome the effect of the wind speed variations on the parameters of the wind turbines and their controllers.

    Keywords- Fuzzy Logic, MPPT-Maximum Power Point Tracking, Power Coefficient, Pitch Angle

    Download PDF
  9. Fault Diagnosis In Induction Motor

    K.R.Gosavi, A.A. Bhole

    Paper ID IR-ICRDETVIJAYA-21124-228 · Pages 49-52

    Abstract

    The paper demonstrates simulation and steady-state performance of three phase squirrel cage induction motor and detection of rotor broken bar fault using MATLAB. This simulation model is successfully used in the fault detection of rotor broken bar for the induction machines. A dynamic model using PWM inverter and mathematical modelling of the motor is developed. The dynamic simulation of the small power induction motor is one of the key steps in the validation of the design process of the motor drive system and it is needed for eliminating advertent design errors and the resulting error in the prototype construction and testing. The simulation model will be helpful in detecting the faults in three phase induction motor using Motor current signature analysis.

    Keywords- Squirrel Cage Induction Motor, Pulse Width Modulation (PWM)

    Download PDF
  10. Power-Frequency Transient Studies Using Dynamic Energy Balance

    D. Srinivas Reddy, V.Bapi Raju

    Paper ID IR-ICRDETVIJAYA-21124-232 · Pages 53-57

    Abstract

    Dynamic Energy Balance is a new technique for power system dynamic simulation. It requires about one tenth the computational effort of a Transient stability study yet gives similar results so far as frequency transients are concerned. Applications, methodology and comparison with a transient stability study are treated in this paper.

    Download PDF
  11. Recovery Of Waste Tetra Pak Materials And Its Application In Concrete

    Gonzalo Martinez-Barrera, Witold Brostow, Susana Hernandez-Lopez

    Paper ID II-NSELDN-12075-1762 · Pages 58-60

    Abstract

    In this research we use gamma radiation as a tool for structural modification of recovered materials from waste Tetra Pak packages and its use for preparing concrete; in order to improve the mechanical properties and to contribute to protecting the environment. The concrete specimens had up to 30% of recovered materials with small sizes between 1.5 mm and 3.0 mm, and they were irradiated to doses of 200 and 300 kGy. The results show that the compressive strength and modulus of elasticity values decrease when increasing the addition of waste Tetra Pak concentration. However, improvements of 39% and 27% were obtained for compressive strength and young modulus, respectively, with applying radiation.

    Keywords-Waste materials, Tetra Pak packages, Concrete, Gamma Radiation, Mechanical Properties.

    Download PDF
  12. Role Of The Cognitive Screening Tool In Early Dementia Diagnosis

    Neelam Sharma, Maheshkumar H Kolekar, Sushil Chandra

    Paper ID II-NSELDN-12075-1855 · Pages 61-64

    Abstract

    Dementia diagnosis is a very complex task at its early stages because its various subtypes have the same symptomatology. Moreover, it becomes difficult to detect mild cognitive impairment with age because with aging, there is an increased prevalence of both health illness and sensory deficit. Therefore, a short screening tool is required to define a clear boundary between symptoms of normal aging and mild cognitive impairment as well as between different subtypes of dementia before proper diagnosis. Screening of dementia in developing countries is a challenging task due to educational and cultural versatility and only one cognitive test is not enough to screen out demented subjects in mass population. The aim of this paper is to analyze need, benefits and difficulties during the selection of cognitive test for a cognitive screening instrument to facilitate interdisciplinary approaches of early dementia diagnosis with least assistance of clinical person for the increasing population of a developing country.

    Keywords: Dementia, Mild Cognitive Impairment, Cognitive Test

    Download PDF
  13. Feasibility And Viability Analysis Of Enhancement Of Mobile Spectrums (With Special Reference To 2G, 3G, 4G And Proposed 5G)

    Shrey Kumar, Gurendra Nath Bhardwaj

    Paper ID II-RIETLDN-12075-1823 · Pages 65-68

    Abstract

    Download PDF
  14. Waste And Recycling Materials Used In Concrete

    Gonzalo Martinez-Barrera, Witold Brostow, Susana Hernandez-Lopez

    Paper ID II-SIMLDN-11075-1817 · Pages 69-71

    Abstract

    Materials with higher strength and high performanceprovide excellent benefits. But after a very short useful-life become waste and contribute to environmental degradation. Some investigations are focused on recycling by using innovative and clean technologies. In this work, waste and recycled materials as well as gamma radiation are proposed as tools for improving mechanical properties of concrete; polyethylene terephthalate of bottles, automotive tire rubber as well as cellulose of Tetra Pak packages are studied as materials.

    Keywords: Waste Materials, Recycling, Gamma Radiation, Concrete, Mechanical Properties.

    Download PDF