← All proceedings

193RD THE IIER INTERNATIONAL CONFERENCE

Proceedings cover: 193RD THE IIER INTERNATIONAL CONFERENCE

Wellington, New Zealand 07-10-2018

6 papers

  1. Combined Electrochemical Oxidation and Adsorption Methods for Ammonia and Molybdenum(VI) Removal from Aqueous Solution

    Amin Mojiri, Akiyoshi Ohashi, Tomonori Kindaichi

    Paper ID II-NSEWELL-07108-12899 · Pages 1-5

    Abstract

    Water pollution is a global issue. In the currentstudy, electrochemical oxidation (EO) and adsorption methods were applied to remove ammonia and molybdenum(VI) from aqueous solution. In the first step (contaminantelimination with EO), response surface methodology was employed to do statistical analysis. Contact time (1–3 h), initial concentration of pollutants (10–50 mg/L), and pH (3–6) were the three independent factors in this experiment. Sodium sulfate (as electrolyte) and Ti/RuO2–IrO2 (as electrode) were applied during EO. At the optimum performance in the EO, the contact time, the initial concentration of contaminants and pH were 2.4 h, 27.4 mg/L, and 4.9. And the removaleffectiveness for ammonia and molybdenum were 79.4%, 48.0%, and 55.9%, respectively. On the basis of the preliminary experiments, the current and voltage were set at 50 mA and 7 V, respectively. After treating water at optimum EO performance, the aqueous solution was moved to a granular composite adsorbent (BAZLSC) column. BAZLSC improved the removaleffectiveness for ammonia and molybdenum(VI) to 99.9%..

    Keywords - Ammonia, Electrochemical oxidation, Molybdenum, RSM

    Download PDF
  2. Do You Know Your Customers? Do You Love Them? Reevaluating Value Creation for Customers through Business Model Innovation

    Michal Lysek, Mike Danilovic, Jasmine Lihua Liu

    Paper ID II-SIMWELL-07108-12759 · Pages 6-16

    Abstract

    What customers want is one thing, but what they actually need and what they desire is something else. In this paper we define existing customer needs as something that customers know and are aware of, can express, and new customer needs as something that customers do not yet know and are not yet fully aware of. Just like in a Johari window. Companies usually go for the former because the latter is more difficult. Particularly when the customer desire is more psychological in character. Business models are valuable innovation tools because they can turn even an old and less novel technology into a successful innovation, but as stated by Chesbrough, at the heart, a business model performs two important functions: value creation and value capture. However, how can you create value when customers don’t know what they actually need? When they cannot express what they actually desire? Maybe a deeper interaction is required, interpreting the customer’s needs, reading between the lines, inferring what is going on underneath the surface, and collaborative prototyping. This study was based on an exploratory, inductive research approach influenced by grounded theory, studying three Swedish technological companies: Axis, HMS and Sectra. Using grounded theory coding techniques, a typology of seller and buyer needs was created based on four categories: unconstrained needs, undoubtful needs, unconventional needs, and uncertain needs. The results show that depending on which category the company resides, the typology can help managers decide when it is appropriate to listen closely to customers, and when it is not. When they want to fulfill existing customer needs and when they want to fulfill new customer needs. However, discovering new customer needs requires close interaction with customers. Especially when you want to discover not just what customers know that they want, but also what they do not yet know that they actually need. Intimacy is needed when you really want to come close to customers and really want to explore and understand their deep desires.

    Index Terms - Business model innovation, customer desire, typology of buyer and seller needs, value capture and value creation.

    Download PDF
  3. Analysis of Electroencephalographic Signal Acquisition using EPOC EMOTIV for Use in Robotic Arm Movement

    Mashal Fatima, Muhammad Shafique

    Paper ID ISD-RIETAUCK-05108-8931 · Pages 17-22

    Abstract

    In recent years, new research has brought the field of electroencephalograph (EEG)-based brain–computer interfacing (BCI) out of its early stages into a phase of relative maturity through many demonstrated prototypes to assist the periphery compromised patients. It is a worth- while technology for disabled people enabling them to reinstate a damaged motor nerve or any neural pathway. This study introduces the development of Brain computer interface by means of a non-invasive wireless electroencephalograph (Emotiv EPOC system) and its application to control a prototype robotic arm. After the pre-processing and spectral analysis of raw EEG signals, an averaged peak value for selected channels were obtained as a feature vector for each movement. Two algorithms namely, linear discriminant analysis (LDA) and quadratic discriminant analysis (QDA) were used to differentiate the raw EEG data into their associative movements. Performance of a classification algorithms were assessed, which revealed that the accuracy was 71.77 (±0.76) % and 86.57(±0.79) % of LDA and QDA respectively. Feature vector resulted in superior performance of 86.57 (±0.79) % with QDA. The averaged peak value of PSD for selected seven channels were then used to move a robotic arm successfully in the two directions i.e. “Up (elbow flexion)” and “Down (elbow extension)”.

    Index Terms - Electroencephalogram (EEG), brain-controlled interface (BCI), Power spectrum density (PSD).

    Download PDF
  4. Detection of Alzheimer’s Disease using Optimized EEG data Acquisition and Signal Processing Techniques

    M. Shafique, Mashal Fatima, Hamza Toor, Imran Amjad, Ik Niazi

    Paper ID ISD-RIETAUCK-05108-8945 · Pages 23-26

    Abstract

    Alzheimer’s disease is a growing health problem in the elderly population. Efficient detection of Alzheimer’s disease is still a challenge. Previous studies have shown that EEG can be used for the detection of Alzheimer’s disease. However, this has been done using expensive EEG systems. This study is aimed at building a low cost EEG based Alzheimer’s disease detection system. This study proposes a low cost EEG based wireless headset system, EMOTIV EPOC, for the detection of Alzheimer’s disease. The slowness of EEG in alpha and beta bands were measured using spectral analysis methods. EEG signals of AD patients showed a significant increase (at p

    Download PDF
  5. Assessing The Acceptance of Smartphone as a Mobile Learning Tool in Kuwait’s Tertiary Education Context

    Fahad Alkhezzi, Mazharuddin Syed Ahmed

    Paper ID IS-ICESSHAMILTN-06108-9552 · Pages 27

    Abstract

    Smartphones today are ubiquitous, are influencing everyday life, have unsettled many age-old activities, devices, tools and technologies with their redefined usage and definitions. They have relatively strong computing capability built into small sizes, their connectivity and are equipped with intuitive operating systems, smart sensors and applications. They have become excellent contrivance as an instant learning content provider, prompt and handy communicator, productivity agent and can significantly enhance blended learning. This research aims at understanding the fundamental factors influencing student’s intentions to use smartphones as a mobile learning tool. In this paper, the modified unified theory of acceptance and usage Unified Theory of Acceptance and Use of Technology (UTAUT2) model is used. The findings approve the significant roles of users’ behaviour intention to use the device a learning tool. Further, the empirical evidence from this research demonstrates that UTAUT2 model is a significant predictor ofstudent behaviour intention to use smartphone as a mobile learning tool. The understanding of parameters that govern their customized and personalized integration is the key to a successful acceptance and assimilation of this device as a mobile learning tool. This research reports the findings, which focused on analysing the acceptance of smartphones as learning tools by comparing various Colleges of Kuwait University.

    Download PDF
  6. The Future of E-Commerce and its Effect on Entrepreneurship

    Egwuagu Charles Uchenna

    Paper ID II-ABMITWELL-07108-11582 · Pages 28

    Abstract

    Ecommerce – the technology with which companies manipulate to stay on top in their various niche is constantly changing. Factors like improved delivery time, excellent customer satisfaction, awesome shopping experience, improved products and services and after sales service remain a constant that companies improve on to boost sales and increase profitability. The future of e-commerce cannot be determined by any scientific calculation, but the mission to improve on the above stated factors can help companies and entrepreneurs spot the trends and stay ahead of the game. Entrepreneurship has evolved over time, what it took to become an entrepreneur in the early 1980s is quite different from what it is now. Land and labour were basic requirements for an entrepreneur to become productive, but with the advent of e-commerce, they are becoming less useful. Entrepreneurs can now automate so many tasks that were ordinarily done by labour; some entrepreneurs do not need to acquire land to run their businesses, just owning a good e-commerce store or even trading on social media platforms are all they require to operate. Customers can also check out on all these channels at the comfort of their homes thereby further reducing labour related activities.
    This paper will focus on what the future holds for entrepreneurship considering ecommerce as the playing field.

    Keywords - Entrepreneurship, E-commerce, Land, Labour

    Download PDF