← All proceedings

175TH THE IIER INTERNATIONAL CONFERENCE

Proceedings cover: 175TH THE IIER INTERNATIONAL CONFERENCE

Bangkok, Thailand 21-07-2018

15 papers

  1. Adaptive Calibration of Coordinate Measuring Machine using Artifact

    Ryoshu Furutani

    Paper ID AE-ICMAEPATTAYA-22078- 2239 · Pages 1-4

    Abstract

    The calibration of the coordinate measuring machines is performed based on the mathematical model of those machine. The feature of the artifact is measured by CMM, the kinematic parameters are determined by comparing the estimated coordinates and the calibrated coordinates. However, it is assumed that the CMM is rigid and stable in any orientations and locations. Actually the CMM is not rigid and not stable. It is proposed that the model equation, the kinematic parameters and the estimators are replaced with the neural network. The calibration method using the neural network is called the adaptive calibration. The neural network studied the relationship between the inputs and the coordinates successfully. In this article, the example of the articulated arm coordinate measuring machine is shown.

    Keywords - Calibration, Kinematic Calibration, Adaptive calibration, Neural Network, Artifact, Coordinate Measuring Machine, Kinematic Parameters

    Download PDF
  2. The Effect of Sodium Tripolyphosphate Level on the Production of Anthocyanin Microcapsules from Purple Sweet Potatoes

    Venitalitya Alethea Sari Augustia, Aad Alief Rasyidi Baking, Revin Nuzul Aryastya

    Paper ID II-CBEBNGK-21078-12091 · Pages 5-8

    Abstract

    Purple sweet potatoes (Ipomoea batatas L.) is a plant rich in anthocyanin. Anthocyanin is a group of reddish pigment contained in the fluids of a cell. Synthetic food colouring substance used widely in the market poses danger to the consumers’ health, and this turns anthocyanin as an alternative substance for food colouring in demand to be developed as it is a non-toxic food-grade substance.
    Anthocyanin microcapsules are produced to protect the compound of anthocyanin contained in the extract of purple sweet potatoes. In the process of microcapsules production using chitosan and NaTTP as the crosslinkers, the selection of NaTTP is done because it does not dissolve in ethanol while at the same time having decent solubility in water when used for food production. To find out if the variation of adding NaTTP to the microencapsulation process affects the final result of microcapsules, the following analyses are conducted, including Fourier Transform Infra Red (FTIR), Yield of Microcapsules (YOM), and UV-Vis Spectrophotometry.
    The results obtained from the aforementioned analyses include the crosslink of chitosan-TPP being on the discrepancy of wavelength for ±1155 cm-1, Yield of Microcapsules (YOM) and Total Monomer Anthocyanin (TMA) scores increasing when TPP concentration increases, with 0,3 (b/V) being the highest score of TPP concentration, while YOM score reaches 2,63 (g) and TMA score amounts to 98,73%.

    Keywords - Anthocyanin, Crosslinker, Micro-encapsulation, Chtosan, Purple Sweet Potatoes

    Download PDF
  3. Development of Cardanol-based Phenolic Resin as Natural Adhesive for Uniting Fossil (Metacarpal Bone of Bovidae Family) Fragments

    Sayekti Wahyuningsih, Ari H Ramelan, Surya D Marliyana, Putri Rahmawati

    Paper ID II-CBEBNGK-21078-12191 · Pages 9-11

    Abstract

    Cardanol, an organic compound contained in Cashew Nut Shell Liquid (CNSL) has been consider as one of natural resources to produce adhesive material. It could have been extracted from CNSL by simply liquid-liquid extraction method. Due to its chemical structure, cardanol has been easily converted to be phenolic resin through polymerization reaction with formaldehyde. Regarding to the necessity in reversible adhesive for initial fossil identification by archeologist and paleontologist, the obtained cardanol-based phenolic resin was then used to reunite fossil bone fragments of Metacarpal Bovidae. Identification of fossil’s compound contents conducted by X-Ray Fluorescence (XRF) showed that the fossil majorly contained CaO (56%), Fe2O3(15.33%), P2O5 (11.85%), MnO (11.17%), SiO2 (2.05%), MgO (1.47%), Al2O3 (0.67%) and other compounds (1.46%). The very hard bone fossil was firstly cut into several pieces and jointed to be three pairs using twodifferent resins, those were commercial epoxy resin, and cardanol-based phenolic resin. Those adhered fragments were then tested using Universal Testing Machine (UTM) in term of examining the strength of each resin. Different strength of both resins commercial epoxy resin and cardanol-based phenolic resin measured were 177.1, and 104 N/mm2, respectively. Although cardanol-based phenolic has the lower strength among resins, but it is reversible and practically the easier one to be applied.

    Keywords - Adhesive, Fossil, Cardanol, Resin

    Download PDF
  4. Intelligent Traffic Control System using Density Based Estimation Algorithms

    Sweswewin, Wutyiwin, Memeko

    Paper ID II-RIETBNGK-21078-11783 · Pages 12-16

    Abstract

    The traffic congestion is a daily occurrence problem throughout the world. This intelligent traffic control system (ITCS) intends to work more effectively the traffic control for the four-way intersection. This system is a vehicle-actuated signal type control system such that traffic cycle time can be varied and related to the actual demands by traffic. The traffic video file at a station in Mandalay is utilized for the experimental test and traffic density area on the road is used as the input data for controller of the system. The density areas on both directions of the analyzed road are calculated by using contour, moment and area-based calculation image processing algorithms. Depending on sum of the amount of density area on both directions, three types of traffic cycle times are determined such as 30 sec, 45 sec and 60 secs. This research is desired to improve the system by reducing waste of time based on traffic density area.

    Keywords - Contour, Moment, Area-Based Calculation Algorithm, Traffic Cycle Time, Density Based Traffic Control System.

    Download PDF
  5. Implementation of Trajectory Tracking Control of a Differential Drive Wheeled Mobile Robot

    Memeko, Kyawthiha, Sweswewin

    Paper ID II-RIETBNGK-21078-11834 · Pages 17-23

    Abstract

    The aim of this research is to accurately track the desired trajectories from a differential drive wheeled mobile robot using fuzzy logic controller. The trajectories such as straight line, goal point, circle and ellipsewas created in MATLAB Simulink block. The difference between the desired position and the current position is used as the input of the fuzzy controller to control the motion of the mobile robot. A motion control structure with a fuzzy controller is proposed to determine velocities of themobile robot. According to the movement timing of the robot, moving forward and trajectory tracking consideration is setup based on the difference of current and torque. The performance of robot path travelled is recorded and implemented using time delay for each steps and PWM (pulse width modulation). These values are sent to PIC16F887 microcontroller and reading data are used as input of motor driver. Left and right DC motors encoders are read and run the motors with motor driver. And then, mobile robot tracks the straight line, goal point, circleand ellipse shape trajectory as the Simulation data in real world with less error.

    Keywords - Trajectory Tracking, Mobile Robot, Fuzzy controller, PIC16F887, DC Motor.

    Download PDF
  6. Employee Data Mining: Analysis of Data Sets for Improving Human Resource Practices

    Juliet V. Menor, Julie D. Rosal

    Paper ID II-SIMBNGK-21078-11729 · Pages 24-35

    Abstract

    Human resources is used to describe both the people who work for a company or organization and the department responsible for managing resources related to employees .It is very important for the company’s to determine the rate of attrition in order for HR Manager to plan and prepare the required number of Human Resources. The data set used from the University from the year 1980 to April 2017 was analysed to find out the summary of employee’s reason for human resources practices. The main objectives of the study is to determine the rate of employee retention at Pangasinan State University, the study includes age, gender, employment status, appointment status, marital status and length of service. Second, to identify the type of employee attrition by using data mining analysis. The result describes the frequency of attrition status, attrition reasons and other attentiveness of variables. Further, in this paper, a data mining analysis was used to visualize the data from Pangasinan State University.

    Keywords - Human Resource, Classification or Clustering, Data Mining Analysis and Visualization

    Download PDF
  7. Digital Library Service Model for International Standard

    Kanita Saengkrajang, Namon Jeerungsuwan

    Paper ID II-SIMBNGK-21078-11928 · Pages 36-39

    Abstract

    This research aim is to develop of Digital Library Service Model for International Standard which included 1) development of Digital Library Service Model for International Standard 2) Evaluating of Digital Library Service Model for International Standard. The sample group consist of 7 experts in arranging Digital Library Service for International Standard are selected by purposive sampling. The statistical methods used in the research are arithmetic mean and standard deviation.

    Index Terms - Digital Library, Digital Library Service Management, ITIL 2011, Cobit 5

    Download PDF
  8. Design of an Intelligent Cloud Learning System to Develop Digital Literacy and Collaborative Learning Skill

    Wanpen Plisorn, Pallop Piriyasurawong

    Paper ID II-SIMBNGK-21078-11938 · Pages 40-42

    Abstract

    This study was conducted to research and develop an Intelligent Cloud Learning System (ICLS) to develop digital literacy and collaborative learning skill. The aims of this study were 1) to design an ICLS to develop digital literacy and collaborative skill and 2) to evaluate an ICLS. The research method was divided into two phases. The first phase involved the design of the model: 1) to study, analyze, and synthesis the content; 2) to arrange the Intelligent Cloud Learning System process; and 3) to summarize the results. The second phase involved the model evaluation. The sample group in this research consisted of seven experts in the fields of design cloud learning system, information technology, algorithm and instructional design. These experts were selected by purposive sampling. Data were analyzed using arithmetic means and standard deviations. The process of developing an ICLS has four components. The model helps to develop digital literacy and collaborative learning skill. The experts agreed with the overall model and had a learning activity that was appropriate at a very good level.

    Index Terms - Cloud Learning, Digital Literacy, Collaborative Learning Skill, Intelligent Tutoring System

    Download PDF
  9. Willingness to Pay to be Forgotten on Internet

    Misuk Lee

    Paper ID II-SSEBNGK-21078-11792 · Pages 43-46

    Abstract

    This study aims to investigate public perception on the right to be forgotten, and to estimate the willingness to pay for it based on the stated preference data. The right to be forgotten means the right of the people to request information and communication providers to delete personal information related to them on Internet. According to the survey results, about 23% of Koreans have heard of the right to be forgotten and individual WTP for it is calculated about 1218 KRW per month on average.

    Index Terms - Right to be Forgotten, Privacy, Willingness to Pay, Contingent Valuation Method

    Download PDF
  10. Private Returns to Education: A Study on Bhutan, Kencho

    Niramol Ariyaarpakamol

    Paper ID II-SSEBNGK-21078-11998 · Pages 47-51

    Abstract

    This paper attempts to estimate the private rate of returns to schooling for workers in Bhutan, using the Mincerian earning framework with pooled regression models. The study uses six waves of Bhutan’s labor force survey data extending from the year 2010 to 2015 for those workers born in the year 1929 to 2000. The results show one extra year of schooling increased an hourly real wage by around 9 percent, and that one additional year of work experience increased an hourly real wage by around 5 percent. This indicates that the private returns to education were higher when accomplishing one additional year of schooling in comparison with gaining one additional year of work experience in Bhutan.

    Keywords - Mincerian Earning Framework, Pooled Regression, Private Returns, and Real Wage.

    Download PDF
  11. The Impact of Government Debt on the Economic Growth of Bhutan

    Sonam Wangmo

    Paper ID II-SSEBNGK-21078-12045 · Pages 52-57

    Abstract

    The study aims to empirically examine the relationship between the government debt and economic growth in Bhutan. The study was motivated by the unprecedented increase in the level of government debt currently prevailing in Bhutan. To determine the relationship the data were obtained from World Economic Outlook (IMF), World Bank and National statistics Bureau of Bhutan. Time series data from the period 1990 to 2016 were fitted into the regression equation using various economic techniques. The result of Augmented Dicky Fuller (ADF) and Phillips Perron (PP) unit root test suggest that all the variables are non-stationary at level but exhibit stationary after the first difference. The Johansen co-integration test and Vector Error Correction Model (VECM) is employed to investigate the effect of debt on real gross domestic product growth.

    Index Terms - Government Debt, Economic Growth, Co-Integration Test, Vector Error Correction Model.

    Download PDF
  12. Mining Educational Data: A Case Study of Kathmandu University

    Manish Joshi, Sushil Shrestha

    Paper ID II-ABMITBNGK-21078-12274 · Pages 58-61

    Abstract

    Online Learning platforms generate vast amount of data from each user interactions in the course and most of these platforms also offer sophisticated monitoring and reporting tools to keep track of these data. However, it is often incomprehensible, poorly organized and difficult to follow, because of the tabular format that most platforms use. This research aims to provide an initial step in the direction of creating a user-friendly monitoring tool that can help educators get information about the interactions in the course easily. So, data of approximately 2000 students, who were registered to Online Learning platform (Moodle) were analyzed. These logs were then used to determine the relationship between student’s grades and student’s participation/interactions in their respective courses. Finally, a decision tree was generated using J48 classifier which can be integrated directly in the Moodle platform.

    Keywords - Educational Data Mining, Learning Analytics, Moodle

    Download PDF
  13. Study on Interaction Analyses for Cytotoxicity of Natural Products by Using Experimental Design

    Hyun Jeong Lee, Bogeun Lee, Sangmun Shin

    Paper ID II-RIETBNGK-21078-12261 · Pages 62-67

    Abstract

    Most existing approaches for cytotoxicity analysis of multi-components natural products may often not consider interactions among a number of components in a natural product without using a designed experiment. This analysis problems include a number of difficulties associated with a dimensionality, such as simultaneous consideration of many ingredients, a huge number of experimental runs, statistical errors related to high dimensions, etc. To this end, this study is to perform systematic statistical designed experimental methods (i.e., mixture experimental design). In order to consider both a number of runs and their associated statistical efficiencies, a simplex lattice design was utilized in this study. In addition, this research also investigates a tradeoff between hepatotoxicity and synergy effects based on a cell viability. The primary goal of this research is to obtain an optimal combination of multi-components by maximizing the cell viability with low cytotoxicitand high synergy effects. To verification purposes, this paper demonstrates an experimental design, its associated statistical analysis results, and an optimization approach and its related results.

    Keywords: Design of experiment, Mixture design, Multi-components, Natural product, Cytotoxicity

    Download PDF
  14. A Design of EXA Design of Experiment (DOE) Approach to Investigate Synergy Effects Among Natural Products

    Taewan Kim, Hyeonae Jang, Sangmun Shin

    Paper ID II-RIETBNGK-21078-12262 · Pages 68-74

    Abstract

    In order to find a significant synergy effects among the combinations of a number of natural products, many researchers have been investigated possible combinations of existing natural products. Because of current foods and lifestyles, an obesity issue has considered as a significant problem and research focus. However, in much literature, many existing approaches may not demonstrate systemic designed experiments and may not consider statistical correlations. The main purposes of this research is to propose a design of experiment (DoE) method and to demonstrate its associated statistical analysis approaches. First, we focused on the inhibition of adipocyte differentiation among a number of selected natural products (i.e., Astragaloside I, Ginsenoside Rd, 3,4-Dicaffeoylquinic acid, and Corilagin) based on existing literature. Second, in order to investigate synergy effects including correlations among a number of natural products, we then proposed a simplex centroid design for this experiment. Third, based on the results of the DoE method and its associated analysis, we further investigated the optimal combinations among the selected natural products. Finally, the experiment results (i.e., DoE, statistical correlation, and optimization) provided a significant possible combination of the selected natural products.

    Keywords - Mixture centroid design, Desirability function, Natural product,Hedgehog signaling,Astragaloside I, Ginsenoside Rd, 3,4-Dicaffeoylquinic acid, Corilagin

    Download PDF
  15. Correlation Analysis for Phamacokinetics (PK) Concentration by Using a Scalization Method

    Jongho.Jung, Yonghee Lee, Sangmun Shin

    Paper ID II-RIETBNGK-21078-12264 · Pages 75-81

    Abstract

    The ICH (International Conference on Harmonization) is to ensure that the drug approval regulations and guidelines are identical to those of patients in different regions of the world in order to rapidly deliver medicines. This has led many countries to comply with Food and Drug Administration (FDA) in the drug approval regulations.To prove the drug stability based on pharmacokinetics (PK) and pharmacodynamics (PD) in in-vivo experiments become significant issues. For this reason, the key motivation of this study is to investigate analysis methods of many different PK profiles associated with human and animal experiments. First, the characteristics of the PK profiles, which are time-oriented functions, for three different animals were analyzed by statistical distributional approaches. Second, the important criteria for the PK analysis, such as maximum of a PK curve (Cmax) and area under curve (AUC), were also compared by three animal PK profiles. Third, we then propose a scalization method for huge different scales of three different animal PK profiles. Fourth, after applying the proposed scalization method, a statistical time-oriented similarity test (i.e., paired t-test) was performed among three animal PK profiles. Finally, we performed a case study to demonstrate statistical similarities and differences of three animal PK profiles by using the proposed statistical distributional approach and paired t-test with the proposed scalization method for verification purposes.

    Keywords - Pharmacokinetics(PK), Scalization, Paired t-test, Area under curve (AUC), Statistical distribution approach, Similarity analysis

    Download PDF