← All proceedings

176TH THE IIER INTERNATIONAL CONFERENCE

Proceedings cover: 176TH THE IIER INTERNATIONAL CONFERENCE

Kuala Lumpur, Malaysia 18-07-2018

13 papers

  1. Development of Pulse Oximeter by using 32-Bit Arm based Microcontroller

    Waleed Mohmood Abdullah, Ergun Ercelebi

    Paper ID IA-ICRAETPUTR-19078-9100 · Pages 1-6

    Abstract

    Pulse oximeteris the medical device that canmeasure the oxygenated percentage inpatient’s blood hemoglobin, which isnoninvasive, simple and efficient method to measure the oxygen situation that transported from the heartto different body organs. The use of pulse oximeterhas been continuously increasing due to it can be utilized at several measurement sites such as the chest, wrists, forehead, and feet.This study is aimed to design pulse oximeter, which is can be used in real monitoring of human health. Thus, this study takes into consideration to check the best method that can be achieved a good accuracy that will give dependable results for both heart rate and SPO2 that can make the using of the proposed oximeter being practiced. For this purpose, we have checked several MCU based ARM cortex 32bit and different sensors and method beside compared it with the result taken from the common MUC result (Arduino UNIO). In follows the description of different methods and its results.

    Keywords- Oximeter, ARMCortex, wearable device, heart rate.

    Download PDF
  2. Malaysian Language Policy Exchange

    Hamsa Hameed Ahmed

    Paper ID IA-ICSSHPUTR-19078-8942 · Pages 7-9

    Abstract

    The Malaysian educational system has undergone a substantial complexity and challenges in its language policy and planning (LPP) after the post-independence period. Decisions and implementation involved in LPP require detailed analysis and consideration of the socio-cultural, historical and political factors during this period. This paper discussed the developments and changes in language policy that happened in Malaysia, from Bahasa Melayu to English. These include the issue on linguistic nationalism during the post-independence phase; the extensive codification in the corpus planning during the second half of the post-independence period; and a renewed definition on the conception on nationalism and the issue concerning the use of English as medium of instruction during the phase of internationalization. This paper also presents the definition of corpus and status planning and whether these three periods reflects corpus or status planning.

    Download PDF
  3. A Survey on Optimal Dynamic Deployment and Scheduling of Relay Nodes in Wireless Sensor Networks

    Muhammad Khurram, Sellappan Palaniappan, Muhammad Kashif Shaikh

    Paper ID IA-ICSTMPUTR-19078-9049 · Pages 10-13

    Abstract

    Wireless sensor network (WSN) consists a group of nodes that are equipped with a small and low power batteries with functions of communication and sensing data to monitor various environmental conditions at different field of locations. The major challenge in WSNs is to achieve a maximum coverage and connectivity perfectly with optimal number of nodes. Connectivity and coverage the two most fundamental issues in WSNs, which have a significant impact on the performance and the capability of WSNs. Random deployment some nodes may get imbricate this will cause unbalanced structure. In the existing system maximum coverage problem is resolved by using the static node deployment strategy in the particular area or a field. Loss of just a single sensor node might obstructs the stability and the reliability of the entire network. Network lifetime extends and also reduces the cost due to optimized deployment strategy, sleep scheduling mechanism and coverage radius. In this paper, we discuss the coverage problem from different perspectives, describe the evaluation metrics of coverage control algorithms, analyze the relationship between coverage and connectivity, compare some simulation tools, and discuss major research challenges and existing problems in this particular area.

    Index Terms - WSN, mobile node, k-coverage.

    Download PDF
  4. Effect of Rice Branon Continuous Organic Waste Decomposition Process

    Reni Sutri Suherman, Akira Yanagihara, Tadashi Yamauchi, Satoshi Matsuda

    Paper ID II-CBEKUALA-18078-11965 · Pages 14-16

    Abstract

    Microbial decomposition process is considered as an environmentally friendly way to treat organic waste. However, during the early stage of continuous input waste decomposition process, some problems often occurred. This study intended to observe the effect of rice bran as an activating agent in organic waste decomposition, to minimalize the problem. Reactor weight, temperature, moisture content, pH and microbe number were used as the parameter to observe the rice bran addition effect in decomposition process. Through the addition of rice bran as the activating agent, decomposition process showed better rate than normal composting which was confirmed by the total waste reduction during the process.Trypticase-soy liquid medium was used to observe the composting microbe growth, with and without rice bran. The microbe number in the medium with rice bran addition was higher than the medium without rice bran. Some material in rice bran is considered having influence in composting microbe growth.

    Keywords - Continuous Composting, Decomposition Process, Organic Waste, RiceBran.

    Download PDF
  5. Compensation on Threatening Employee Under Civil Law and Common Law

    Mustafa Rashid Issa

    Paper ID II-LPSKUALA-18078-12086 · Pages 21-24

    Abstract

    Employers with twenty or more employees are prohibited from preventing an employee from engaging in politics or from becoming a candidate for public office. Further, an employer may not control or direct the political activities or political affiliations of its employees with the adoption or enforcement of any rule, regulation or policy or threats . Coercion or influence by an employer by threats of discharge or employment loss for an employee’s support or affiliation with a particular political faction or organization is also prohibited. It is unlawful for anyone except common carriers to transport or cause to be transported into Louisiana persons who are employed to obstruct or interfere by force or threats with peaceful picketing or union organizational activities.

    Keywords- Employers, Threatening, laws, threat cases, compensation.

    Download PDF
  6. Mechanisms to Implement un Security Council Resolutions by using Military Force (Libyan Crisis 2011 As A Model) Analytical Study

    Adnan Abdullah Rasheed

    Paper ID II-LPSKUALA-18078-12107 · Pages 25-30

    Abstract

    The forms of international organizations varied according to the purpose of their establishment. These types of international military organizations were formed, which aim to defend by all means (even military ones) the security and safety of the members of these organizations. The North Atlantic Treaty Organization (NATO) is one of those military organizations that emerged after the end of the Second World War with the victory of the Allies over the Axis Powers, and then the Cold War between the allies of yesterday and today's adversaries. Most of the countries of the world are divided into supporters of this or that camp. The end of the Second World War marked the outbreak of another war called the Cold War between the two international poles: The Western pole led by the United States of America and the Eastern Pole led by the former Soviet Union. This Cold War has resulted in the emergence of international military organizations, and these international military organizations continued even after the demise of one of the two poles (the Soviet Union). The North Atlantic Treaty Organization (NATO) remains and its last intervention in the emerging crises was its intervention to topple Colonel Muammar Gaddafi's regime in 2011. Because no military force was established under the UN, The UN Security Council (as a principal organ of the United Nations responsible for the maintenance of international peace and security), in the implementation of its resolutions under Chapter VII of the United Nations Charter, It depends on states and international military organizations, including NATO ((Libyan Crisis 2011 as a model).

    Key words- UN Security Council, The NATO, Libyan Crisis, Arab Spring Revolutions.

    Download PDF
  7. Extracting Digital Elevation Model (DEM) from SENTINEL-1 Satellite Imagery: Case Study a part of Cameron Highlands, Pahang, Malaysia

    Ayubmohammadi, Baharin Bin Ahmad, Himan Shahabi

    Paper ID II-NSEKUALA-18078-11807 · Pages 31-36

    Abstract

    Because of simple structure and high applicability, Digital elevation model (DEM) plays a significant role in hazard studies. DEM is widely used as a basic source of data in many environmental fields. SENTINEL-1 is one of the most applicable tools for terrain data generation. Regarding online availability and its significance in interferometry studies, SENTINEL-1 satellite imagery in different areas is drawing scholar’s attentions worldwide. Our purpose in this study is to create high resolution DEM from SENTINEL-1 satellite imagery for a part of Cameron Highlands, Pahang, Malaysia. However, we acquired a pair of SENTINEL-1 satellite images for the dates 25/02/2015 and 29/10/2016 through scihub.copernicus.eu website. Using Interferometry Synthetic Aperture Radar (InSAR) technique and Sentinel Application Platform (SNAP) software we generated DEM with 10*10 resolution. Results indicate that this method is highly effective for extracting high resolution DEM from SENTINEL-1 satellite products. Furthermore, using linear regression and standard errors of the estimate model using Statistical Package for the Social Sciences (SPSS) software the extracted DEM was validated. Moreover, this study can be a platform for those who want to generate high resolution DEM for their scope of the study.

    Keywords - Digital Elevation Model, SENTINEL-1, Cameron Highlands, Malaysia

    Download PDF
  8. K-Ras Gene Mutation in Iranian Women with Breast Cancer

    Arshad Hosseini, Hussain Ahmad, Zahra Salehi

    Paper ID II-RAMSKUALA-18078-12252 · Pages 37-41

    Abstract

    TheK-ras mutations play different role in diagnosis, prognosis and treatment efficacy in different types of cancer. Breast cancer is one of the most common cancers in Iranian women therefore the study was designed for the analysis of K-ras mutation and their clinical pathological significance in breast cancer. In K-ras codon 12 and 13 of exon 2 that had an important role in various types of cancer were studied, in irani women suffering from triple negative invasive ductal carcinoma of the breast. Circulatory DNA was obtained from the blood plasma of 50 breast cancerous patients with triple negative invasive ductal carcinoma and 20 normal non-cancerous blood plasma samples, K-ras mutational status was determine in the purified DNA sample by ARMS PCR, Nested PCR using wiled type and mutational specific primer for Gly12Ala, Gly12Asp, Gly12Arg, Gly12Cys, Gly12Ser, Gly12Val and Gly13Asp. The results were confirmed by DNA Sanger
    Sequencing. The results of our study find out that there is no mutations in any of the seven studied SNPs of K-ras in triple negative breast cancer as well as some important SNP in of exon 2, codons 10, 11, 15, 18, 19 and 22.The low frequency of K-ras mutation in irani women of triple negative breast cancer little can be concluded about the malignant potential of atumor containing an activated K-ras gene.

    Index Terms- Breast Cancer, K-ras mutation, ARMS PCR, Sequencing

    Download PDF
  9. Influence of Tool Wear on The Cutting Forces in High Speed Green Milling of Titanium Alloys

    Habiballah Safari, Safian Sharif

    Paper ID II-RIETKUALA-18078-11959 · Pages 42-46

    Abstract

    The possessions of titanium and its alloy are expressively suitable for extreme working conditions in aerospace industries. Owing to the high affinity of tool materials for titanium, combined with high-strain hardening and low-elasticity modulus deteriorate the machinability of titanium alloys. High-speed machining (HSM) of titanium alloys is not efficient because of extremely high thermal loads developed on the tool material. However, owing to the responsibilities with regard to the social environment and workers’ health, the application of conventional cutting fluids in metal cutting requires strict regulation for the disposal of the used fluids. Therefore conducting dry machining is essential for promoting value-added sustainable and green manufacturing. An experimental investigation on the effects of machining parameters on the various machinability aspects of Ti-6Al-4V ELI was conducted, during HSM, using coated and uncoated carbide tools. The study involved the use of various machining parameters, such as cutting speed and feed rate. Machining responses that were evaluated include cutting force during the machining operations. Results show that cutting speed and feed rate significantly affected the cutting force. Meanwhile, uncoated tools outperform the TiAlN+TiN coated tools in all investigated cutting conditions. Results also show that increasing the cutting speed decreases the resultant cutting force during HSM process. Uncoated tools exhibit less cutting force when HSM Ti-6Al-4V ELI as compared to coated tools.

    Keywords - Cutting Force; Green Milling; High Speed; Titanium Alloy.

    Download PDF
  10. Practice of Social Networking Technologies in Jazan University, KSA: A Survey

    Muhammad Arshad, Farhan Ahmed Siddiqui

    Paper ID IRES-IC4ELNGKWI-18078-8325 · Pages 47-51

    Abstract

    Mohammed bin Salman, crown prince of Kingdom of Saudi Arabia's has been implemented an innovative vision and procedures for the enhancement of Saudi Arabia by vision 2030 in education and economic matters. Advanced education intellects and enumerate the plans to connect the world classes and be globalized. Investigating the utilization of Social Networking Technologies (SNTs) has been started in numerous Higher Educational Institutions (HEIs), for example, educational blogs, wikis for community oriented substance formation and podcasting for visual and record of educational components in education activities, it is slight appropriation and utilization of SNTs in the perspective to the Kingdom's institutions of higher education. The foremost objective of this research work is to explore the practice of SNTs within Jazan University during teaching, learning and research by the help of existing instructors' and students' frameworks, attitudes and prospects.

    Index Terms - E-Learning, social networking technologies, collaborative learning, higher education institution.

    Download PDF
  11. Employee’s Perception towards Manager’s Big Five Personality in Creating a Coaching Culture

    A.Rahim N.S, Najat W, Saidi M.I, Mohamed Ayub Hasan

    Paper ID IRES-ICESSLANGKAWI-18078-7717 · Pages 52-55

    Abstract

    The purpose of this research is to study on employee’s perception towards manager’s big five personality in creating a coaching culture at MajlisBandaraya Johor Bahru (MBJB). The big five personality traits roles in this research by Posta and McRae (1990) consists of five personality, first personality agreeableness, second is neuroticism, third is openness to experience, fourth is extraversion and lastly conscientiousness. This big five personality is to support in creating a coaching culture in organization, according by David Clutterbuck and David Megginson (2005) in measurement the coaching culture have three levels. First, coaching within the relationship, second, coaching within team and third, progress towards a coaching culture. However, this study will help the managers big five personality and also the management to identify what the employee’s perception towards managers big five personality in creating coaching culture. This is the is very important personality to control all the activity in organization. With the best coaching culture that makes it capable of managing an organization in a more organized and has an effective strategy to achieve organizational goals. As such, the overall of this study was conducted to identify what the best personality in creating a coaching culture, to make sure the performance of the company is in excellent condition. The overall findings of the research will help the organization in creating a coaching culture.

    Keywords - Employee, managers’, five personality, coaching, coaching culture.

    Download PDF
  12. IPA for The Development of Marine Leisure Tourism in South Korea on Expert Perspective

    Da Hye Jang, Woo Jeong Cho, Eui Yul Choi

    Paper ID RF-ICMESSKUAL-18078-2802 · Pages 56

    Abstract

    As people’s standard of living improves and income increases, the interest of marine leisure is also increasing. In particular, Korea is surrounded by the sea and has optimal conditions for marine leisure activities, so government agencies are also preparing ways to promote marine leisure tourism. The purpose of this study is to identify the importance and current level (performance) of the development factors of marine leisure tourism using IPA to the opinions of expert group and then to contribute to policy direction.
    Importance-performance analysis (IPA) is method to identify the importance of various factors and to determine subject performance. This study used IPA to determine the importance and performance of the policy of marine leisure tourism in order to build the future industrial development strategy.
    The survey was conducted either directly or e-mail for experts in marine leisure tourism, consisting of university professors, researchers, field experts and related officials from 6 April 2018 to 30 April 2018. The questionnaire consisted of twelve factors derived from previous studies and reports. Each factor validated through Exploratory Factor Analysis and Cronbach's α and the method of analysis were descriptive statistics, t-tests and Importance and Performance Analysis (IPA) using SPSS 18.0.
    Following findings were derived from current study. First, marine leisure safety•culture improvement had the highest mean score among 12 items from the importance scale, followed by the extension of experience•education program, marina facilities expansion, Open promotion event and Water Leisure Safety Regulation revision. Second, Open promotion event had the highest mean score among 16 items from the performance scale, followed by, the extension of experience•education program, marine water front space maintenance, promotion of marine leisure tourism act and marine leisure safety•culture improvement.
    Finally, Importance Performance Analysis (IPA) shows that the first quadrant includes marine leisure safety•culture improvement, marine leisure experience, the extension of experience•education program, marina facilities expansion, Open promotion event, marine water front space maintenance. The second quadrant includes Water Leisure Safety Regulation revision. The third quadrant covers establishment of marina service industry, cluster•specialized in marine leisure tourism, establishment of marine leisure education center, promotion of private investment activation, marine leisure tourism business support system and the Fourth quadrant contains Water Leisure Safety Regulation revision.

    Index Terms- Marine Leisure Tourism, Marine Leisure, Importance Performance Analysis (IPA),

    Download PDF
  13. Programmed Controller for a Rigid SCARA Robot Links

    Marwan Ali, Milan Simic

    Paper ID RF-ICSETKUA-18078-1675 · Pages 57-61

    Abstract

    The Selective Compliance Assembly Robot Arm (SCARA) robot arm has a complex mechanism as it tries to imitate the human arm for performing tasks. In this paper, the implementation of a PID controller using visual C# environment is presented. Hardware and software solutions are chosen is to keep the costs at a minimum. A GUI is designed to monitor and control the robot arm in real-time. The final controller performances are monitored and analyzed. This opens a new, innovative, inexpensive and flexible environment for controller implementation.

    Index Terms - SCARA robot; control; PID; visual C#

    Download PDF