← All proceedings

161ST THE IIER INTERNATIONAL CONFERENCE

Proceedings cover: 161ST THE IIER INTERNATIONAL CONFERENCE

Barcelona, Spain 24-04-2018

7 papers

  1. The Impact Of The Dark Leadership On Organizational Ethic Climate

    Erdinc Balli, Ayseipek Koca Balli

    Paper ID II-ABMITBRAC-24048-10683 · Pages 1

    Abstract

    If asked to generate a list of leaders, most people could quickly provide the names of several very popular, successful, and great leaders. It seems that when we think about leadership, we are conditioned to think about leadership only positive. The increasing number of corporate scandals, ethical breaches, and failed organizations show us that we have neglected to research very important and fruitful side of leadership – bad side of leadership - and its negative effects and results. Dark leadership’sresearches concern leadership effectiveness studied from the reverse angle. Dark leadership can be defined as dysfunctional personality of leaders effects on his/her behavior and decision negatively.

    In this study is aimed to be examined; the relationship between dark leadership and it’s sub dimensions with organizational ethic climate in the context of hotel management,. The concepts of leadership and organizational ethic climate, has been choosen as a research topic, because of their effects on organizational outputs. The relational screening model was preferred. Questionnaire technique has been used as the data gathering method and for this purpose ‘Dark Leadership Scale’ developed by Gillaspie (2009), ‘Organizational Ethic Climate Scale’ developed by Schwepker (2001) have been used in this study. As a result of this research conducting on 794 employees who work in four or five stars hotels located in Turkey’s four biggest cities (Adana, Ankara, İstanbul and İzmir). There are a negative relationship between organizational ethic climate and dark leadership (r= -0,244, p< 0,01), paranoid leadership (r= -0,488, p< 0,01), compulsive leadership (r= -0,152, p< 0,01), passive aggressive leadership (r= -0,102, p< 0,05) and narcissist leadership (r= -0,95, p< 0,05). Regression analysis of the impact of dark leadership (R2=0.274) over organizational ethic climate, found a significant change in the coefficient of determination.

    Keywords: Dark leadership, organizational ethical climate, hotel management.

    Download PDF
  2. An Efficient Approach For Solving Fisher's Equation Using Radial Basis-Collocation Technique

    M. Al-Towaiq, Ahmed Ababnah, Shathaal-Shwayyat

    Paper ID II-APMBARC-24048-10623 · Pages 2-5

    Abstract

    In this paper, we propose an efficient modification of the Collocationmethod which uses a radial basis function (RBF) as a basis function to findan approximate solution of a boundary value problem. We use the Fisherequation as a case study to examine the validity and applicability of theproposed technique. The numerical results show that the proposedmodification is efficient, applicable, easy to use, and more accurate thansome existing methods in the literature.

    Keywords: Collocation Method, Radial Basis, Differential Equations, Fisher Equation.

    Download PDF
  3. E-Commerce Innovation: A Literature Review On The Influence Of Omni-Channel Retailing On Consumer Shopping Behavior

    Isaac Acheampong

    Paper ID II-SSEBARC-24048-10776 · Pages 6-8

    Abstract

    A comprehensive review of the existing literature on Omni channel retail innovation has shown that not much has been studied on the influence on the mobile channels on reshaping consumer’s shopping behaviour in the e-commerce industry. The addition of mobile channels such as Mobile phones, Tablets and Apps have not been highlighted in terms of their impact in changing the consumer shopping behavior. Studies compare Omni channel to Multi channel. Consumers interact with a channel at a time in multichannel and interact simultaneously with various channels in Omni channel retailing. However, specifically how the simultaneous interaction with various mobile channels reshape consumer shopping behaviour in e-commerce has not been brought to the fore clearly.Knowledge of the extent to which mobile channels influence consumers shopping behavioral patterns will help managers to know how to manage each channel and eventually how to meld them in providing the seamless consumer shopping experience.

    Keywords: Omni Channel, Mobile Channels, Consumer Shopping Behaviour And Webrooming.

    Download PDF
  4. Effect Of Y Addition On Microstructure And Mechanical Properties Of As-Cast MG-ZN-ZR-LA Magnesium Alloys

    Yunus Turen, Huseyin Zengin, Yavuz Sun, Hayrettin Ahlatci, Mehmet Unal

    Paper ID II-RIETBARC-24048-11117 · Pages 52-54

    Abstract

    The microstructure and mechanical properties of as-cast Mg-Zn-Zr-La-Y alloys were investigated. The alloys were produced by low pressure die casting method. Microstructure investigations revealed that Y addition resulted in a formation of Mg-Zn-Y phases generally expressed as three forms I-phase (Mg3Zn6Y), W-phase (Mg3Zn3Y2) and X-phase (Mg12ZnY). After Y addition, the coarse Mg-Zn-La second phases were replaced by semi-continuous net-like second phase structure, which coarsened with increasing Y addition. A considerable increase in the yield strength was observed after Y addition but elongation to fracture was deteriorated due to the increased amount of second phases that may cause premature crack propagation.

    Keywords: Magnesium Alloy, ZK60, Casting, Microstructure, MechanicalProperties.

    Download PDF
  5. Effect Of Copper Additions On Microstructure, Casting And Mechanical Properties Of Az91 Magnesium Alloy

    Mehmet Unal, Erkan Koc, Yunus Turen, Yavuz Sun, Hayrettin Ahlatci

    Paper ID II-RIETBARC-24048-11118 · Pages 55-58

    Abstract

    In this study, the effect of Cu element addition varied between 0.5 - 1.0 and 2.0 wt.% on the microstructure, casting and mechanical properties of AZ91 magnesium alloy were investigated. The microstructural results showed that as increasing Cu additions into the AZ91 alloy, caused coarsening of the phases occurring at grain boundaries. Addition of 2% Cu forms darker phases and shows a more homogeneous distribution in the structure of the grains. When examining the effect on casting properties; as the increasing of Cu additions the fluidity of AZ91 alloy increased was observed. In the hot tear tests two different mold systems were used. Hot tearing were observed in the longest section in the tests using " the mold same diameter, different lengths" and when the "the mold different diameter, same lengths" were used, Hot tears disappeared in all of the samples with a diameter of 12 and 16 mm while all the samples with a diameter of 8 mm had a hot tear with Cu additions. Little bit decrease in hardness observed with the addition of 0.5 wt.% Cu while 1.0 wt.% and 2.0 wt.% Cu additions showed a slight increase in hardness. Tensile strength of the alloy increased with the addition of Cu to the AZ91 alloy, but the AZ91 alloy also showed a slight decrease in elongation.

    Keywords: AZ91, Fluidity, Hot Tearing, Magnesium.

    Download PDF
  6. Electrochemical Corrosion Behavior Of MG-5AL-1TI-XZn Alloys

    Hayrettin Ahlatci, Harun Cug, Yunus Turen, Yavuz Sun, Mehmet Unal, Huseyin Zengin

    Paper ID II-RIETBARC-24048-11119 · Pages 59-62

    Abstract

    In this study, the effect of addition of Zn element on the electrochemical corrosion resistance of Mg5Al1Ti magnesium alloy produced by conventional casting method was investigated. Master alloy Zn addition is 2% and 4%. The corrosion test was carried out in a 30gr NaCl / l + 10ml HCl / l solution with potentiodynamic polarization measurement methods. Potentiostatic polarization corrosion experiments were performed using a computer controlled Gamry model PC4/300mA potentiostat / galvanostat with DC105 corrosion analysis software. Scanning Electron Microscope, stereo microscope and X-ray diffraction analysis were used for microcharacterization. Corrosion current density and corrosion potential values were measured from the potentiodynamic polarization curves of the investigated alloys. The Mg5Al1Ti master alloy containing 4% Zn element exhibited the lowest current density at 1.55mA/cm2.

    Keywords: Mg5Al1TiAlloys, ZnAddition, Casting, CorrosionResistance.

    Download PDF
  7. Investigation Of Microstructure, Hardness And Wear Properties Of Mwcnt Reinforced Az91 Magnesium Matrix Composites

    Yavuz Sun, M. Emre Turan, Hayrettin Ahlatci, Yunus Turen, Mehmet Unal

    Paper ID II-RIETBARC-24048-11120 · Pages 63-65

    Abstract

    In this study, 0.25 wt.% Multi-Wall Carbon Nanotube (MWCNT) reinforced magnesium matrix composites were synthesized by semi-powder metallurgy technique. Uniform distribution of MWCNT and improvement of hardness and wear performance were aimed at this work. Unreinforced AZ91 magnesium alloy and MWCNT reinforced composite were fabricated in hot press test device. Argon atmosphere was used to prevent oxidation due to having poor oxidation resistance of magnesium and its alloys. Scanning Electron Microscope (SEM) and X-ray Diffraction (XRD) were used to characterize of the present phases and microstructure. Tribological test was conducted by reciprocating apparatus integrated with tribometer test machine. Different loads (5N, 10N, 20N and 40N) were applied in dry sliding conditions. Based on the results, hardness behavior is improved about 10% with the addition of MWCNT. Samples have free of microstructural defects according to the SEM results. MWCNT reinforced sample has also lower wear rate than unreinforced magnesium alloy.

    Keywords: Magnesium, MWCNT, Semi Powder Metallurgy, Tribology.

    Download PDF