Amsterdam, Netherlands 09-07-2017
Aircraft cracked structures life can be extended with the reinforcement of composite and metallic patches using bonding techniques. Effect of the adhesive on the performance of the patch repairs was evaluated by conducting a comparative study on cracked aluminum plates. Fatigue tests were conducted on 2 mm thick specimens under a maximum surface load of 120 MPa for both repaired and unrepaired specimen configurations at stress ratios of R= 0 and R= 0.1 using 20 Hz frequency. The fatigue life of the specimen is affected by the stress ratio in both cases i.e. patched and unpatched case. As the load ratio increases, the fatigue life increases for both repaired and un-repaired specimen. A numerical study of some tested configurations has been conducted using Franc2D. The numerical results for unpatched cases are in good agreement with the available analytical solution. It can be observed from the numerical investigations that there is a drastic reduction in SIF after specimen reinforcement. The maximum observed reduction in SIF after patching was around 65%.
Keywords—Crack length (a), Stress ratio (R), Stress intensity factor (SIF).
Rechargeable wireless sensor networks get the focus of attention recently for wireless charging technology’s rapid progress. Since the loading of each sensor is different, the speed of energy depletion of sensors is different too. Thus, to obtain a feasible charging route, not onlyshould the moving distance of the charging device be minimized to save its energy, but also all the sensors should be charged in time, so that the whole network can work correctly. In this paper, a genetic approach is proposed to solve this complex problem. The preliminary simulation results show that the proposed approach can get the feasible charging route as expected.
Index Terms—Recharging Wireless Sensor Networks, Genetic Approach, Charging Scheduling.
Through the secondary-data analysis method, the impact of university of science and technology electrical engineering and computer science students’ participation in off-campus internship on their entrepreneurial ability was explored in this study. From the secondary-data, 372 students enrolled in the second year through the fourth year from 4-year electrical engineering and computer science departments (day school) of eight universities of science and technology that participated in off-campus internships were research participants for analysis. Research results show that, for the universities of science and technology electrical engineering and computer science students, “innovation and entrepreneurship programs were taken” had a significantly positive impact on their entrepreneurial ability. Compared to senior students, whether or not the sophomore and Junior students university of science and technology electrical engineering and computer science students took up innovation and entrepreneurship programs had less impact on their entrepreneurial ability. In particular, internship over 320 hours in total, internship at SMEs, and serving as a project planner have positive impact on students’ entrepreneurial ability; serving as an exhibition venue assistant has less impact on students’ entrepreneurial ability.
Keywords: Off-Campus Internship, Entrepreneurship Education, Entrepreneurship Competency
Business must make decisions and formulate plans in order to maintain or improve their positions in the market. Having accurate forecasts for demand helps decision makers in reaching their targets. With this purpose, a large number of forecasting techniques have developed and used widely with success. Also, another significant breakthrough in the field of forecasting is to consider the combining methods to improve forecasting performances. In this study, demand forecasts for an international furniture company have been made through five forecasting techniques and the widely-used combining methods. The results confirmed by the nonparametric tests indicate that none of the single models is superior to the others, and combined forecasts result in statistically significant improvements in forecasting performance as compared with the single models considered.