← All proceedings

40TH THE IIER INTERNATIONAL CONFERENCE

Proceedings cover: 40TH THE IIER INTERNATIONAL CONFERENCE

Manila, Philippines, 09-10-2015

ISBN 978-93-85832-17-8

15 papers

  1. Study Habits And The Performance Of BSCS Students In Computer Programming-1

    Darwin C. Llavore, Isidro L. Duran, Belinda M. Dungan

    Paper ID II-ABMITPPNS-09105-2251 · Pages 1-4

    Abstract

    Download PDF
  2. Environmental Efficiency Analysis

    Muryani, Wisnu Wibowo

    Paper ID II-SSEPPNS-09105-2206 · Pages 5-9

    Abstract

    - This research aims to measure the efficiency of environment when the countries implement Kyoto protocol or not. By utilizing The DEA method, it will be analyzed. The developed and developing countries pay attention to the utilization of energy, including members of the G20. Some important conclusions have been concluded deal with energy, efficiency and productivity.

    Keywords- Energy, G20, efficiency, Productivity

    Download PDF
  3. Environmental Efficiency Analysis

    Muryani, Wisnu Wibowo

    Paper ID II-SSEPPNS-09105-2206 · Pages 5-9

    Abstract

    - This research aims to measure the efficiency of environment when the countries implement Kyoto protocol or not. By utilizing The DEA method, it will be analyzed. The developed and developing countries pay attention to the utilization of energy, including members of the G20. Some important conclusions have been concluded deal with energy, efficiency and productivity.

    Keywords- Energy, G20, efficiency, Productivity

    Download PDF
  4. CHILDREN TRAFFICKED FOR SEXUAL EXPLOITATION IN THE PHILIPPINES: AN ANALYSIS OF STATE ACTION USING A NEO-LIBERAL INSTITUTIONALIST FRAMEWORK

    IAN NASSER E. BEROWA

    Paper ID II-SSEPPNS-09105-2303 · Pages 10-13

    Abstract

    Download PDF
  5. Design And Simulation An Observer-Based Controller For Nonlinear System Based Feedback Linearization

    Ahmed Jaber Abougarir, Adel A M Abosdel

    Paper ID EEEBGK-0501-226 · Pages 14-17

    Abstract

    : In nonlinear systems, using a conventional controller cannot improve the system behaviors with an acceptable accuracy. Therefore, to meet a specified specifications modification in system structure and in controllers must be done. In this paper an adaptive approach (e.g. Linear Quadratic Optimal State Estimator Integral Control [LQOSEIC]) is used in such a way to make a linearized system model that operate as a model reference for the nonlinear system and provides the best performance for the nonlinear system.

    Key word: Nonlinear system, Linearized system, PID controller, LQR, Integral control, Observer.

    Download PDF
  6. Reduction Of Iron Ore By Charcoal Under Microwave Irradiation

    Muhammad Junaidi, Ken Ninez N.P, Sheila Pramusiwi, Ika Ismail, Sungging P.

    Paper ID EEEBGK-0501-229 · Pages 18-21

    Abstract

    Download PDF
  7. A Multi Output Cycloinverter With Input Power Factor Correction For Induction Heater System

    S. Jaanaa Rubavathy, P.Murugesan

    Paper ID EEEBGK-0501-230 · Pages 22-25

    Abstract

    Download PDF
  8. Applications Of Image Processing: A Review

    Beant Kaur, Jasleen Kaur

    Paper ID EERCGH-258-228 · Pages 26-29

    Abstract

    Download PDF
  9. Applications Of Image Processing: A Review

    Beant Kaur, Jasleen Kaur

    Paper ID EERCGH-258-228 · Pages 26-29

    Abstract

    Download PDF
  10. Studies On The Visual Merchandising In Retail Stores In Ludhiana

    Ramandeep Sodhi, A.K.Sinha, Rita Kant

    Paper ID EERCGH-258-232 · Pages 30-32

    Abstract

    The study aims to find out how and to what extent retail apparel outlets incorporate visual merchandising in retail stores in Ludhiana. The survey method was followed to conduct the study and data were collected through Interview schedule and convenient sampling. Ludhiana was selected as locale of the study. The major findings showed that almost all the stores exhibits creative and interesting displays that incorporate aesthetic principles with basic merchandising techniques to inform and educate potential buyers about the products. Moreover displays are frequently changed to promote new product launches, merchandise assortment, brand names and reflect festive or season themes such as Christmas, New Year, Spring or Summer. All the stores allocate specific budget for their displays. It was further found that almost all the stores employed different elements such as mannequins, lightning, scents, music, layouts, props, fixtures for enhancing their store ambience and attracting customers into the store.

    Keywords: Visual merchandising, Window displays, Store layout, Store ambience and Props.

    Download PDF
  11. Design Of Optimal Disturbance Rejection Controller For CSTR Using Particle Swarm Optimization

    Anshu Sharma, Shiv Narayan

    Paper ID EERCGH-258-233 · Pages 33-36

    Abstract

    This paper proposes design methodology for a disturbance rejection optimal PID controller for Continuous stirred tank reactor (CSTR), posing the controller design problem as optimization problem and, then, solving it using particle swarm optimization algorithm (PSO). The performance index to be minimized is the H2 - norm of the tracking error and constraint is the frequency domain performance of disturbance rejection. The problem boils down to the minimization of H2 performance index under the inequality constraint of H∞ norm of closed loop transfer function. The PSO is used to solve the constrained optimization problem.

    Keywords- Disturbance rejection controller, CSTR, PID. Particle swarm optimization, global optimization, optimal

    Download PDF
  12. Direct Torque Control Of Three Phase Induction Motor Using Fuzzy Logic

    Rajendra S. Soni, S. S. Dhamal

    Paper ID IEEEPU-258-227 · Pages 37-41

    Abstract

    Induction motor drives using field oriented control (FOC) for torque and flux control have been used in high performance industrial applications instead of dc motors for many years. In FOC, torque and flux of an induction motor can be controlled independently by decoupling the stator current into its orthogonal components. The FOC method has achieved a quick torque response. But in order to achieve expected performance from FOC, exact identification of parameters is required. A new torque and flux control scheme called the direct torque control (DTC) has been introduced for induction motors. In DTC the torque and flux of an induction motor can be controlled directly by applying a suitable voltage vector to the stator of an induction motor. However, convectional DTC result in large torque and flux ripples. In this paper, a controller based on fuzzy logic is designed to improve the performance of DTC and reduce the torque and flux ripple.

    Download PDF
  13. To Study On Bandwidth Enhancement Of Rectangular Slotted Rectangular Patch Micro-Strip Antenna For Wireless Application

    Krishan Kumar, Dinesh Kumar Srivastava

    Paper ID IESDEL-258-226 · Pages 42-44

    Abstract

    - In this paper, a rectangular slotted micro-strip antenna with linear polarization has been used to analyzed and simulate structure for the wireless application. The proposed antenna has been simulated at the 1.87 GHz frequency. This compact antenna is fed by microstrip feed line. This antenna is simulated by IE3D zeland software. To analyze the proposed antenna, simulated results on return loss, Gain vs. frequency graph, radiation pattern, smith chart and VSWR graph is presented.

    Download PDF
  14. Sathon Phonyangsong, Usaporn Sucaromana

    Paper ID ID-IC3SHBNGK-17054-81 · Pages 45-48

    Abstract

    Download PDF
  15. The Scattering Pattern Study Of Zinc Oxide Nanorod On Silica Glass Substrate For Protein Immobilization Platform

    Thanit Apiwattanadej, Pornpimol Sritongkham, Waleed S. Mohammed

    Paper ID ISERD-ICMBEBNGK-17055-103 · Pages 49-52

    Abstract

    In this work, the light scatterings from Zinc oxide (ZnO) nanorods on silica glass substrate for protein immobilization are reported. ZnO nanorods were grown using hydrothermal process. The effects of the growth time and the effects of Dimercaptosuccinic acid (DMSA) concentration on the scattering pattern of ZnO nanorods were experimentally measured using a nephelometer. According to the results, the growth time increased the length of nanorod and reduced the number of nanorod per unit area. The optimum results for 12 hours growth was 6.35 nW (9.76 %RSD) for the scattering power and the scattering peak angle was 54.22 degree (0.03 %RSD). DMSA solution was used to functionalize carboxylic group on the ZnO surface. Hence, in the presence of 0.1 mM DMSA, the maximum scattering power of ZnO nanorods was reduced up to 1.5%. These outcomes were resulted from the dissolving of ZnO nanorod in acidic solution. ZnO nanorods on silica glass substrates demonstrated a potential to be conjugated with other proteins, which could be applied for biosensor fabrications.

    Index Terms- Light scattering, Optical biosensors, Hydrothermal process, Zinc oxide nanorod

    Download PDF