Miami, USA 23-11-2023
Abstract - In this paper, the authors discussed the principle of operation of metal expansion joint and presented traditional methods of their production. Moreover, they discussed the innovative concept of producing these elements using a laser beam and external forces. The authors explained that these are elements intended to compensate for temperature differences and stresses in construction materials. The authors then analyzed traditional methods of producing metal expansion joints, highlighting their limitations and potential difficulties. They indicated that there is a need to look for new, more effective production methods that can increase the efficiency and quality of these elements. The main part of the article discusses a new concept of producing metal expansion joints using a laser beam and external forces. The authors described in detail the manufacturing process in which the laser beam is precisely controlled to shape the metal material according to the required compensator geometry. At the same time, external forces are applied to accelerate the process. This approach allows for the accuracy and repeatability of manufacturing, which is crucial for the effectiveness of metal expansion joints.
The rest of the article presents the results of research on this new manufacturing method. The authors focused mainly on the recorded processing parameters, such as laser power, processing speed, acting forces, and geometry of the obtained elements. The results of these tests confirmed that the proposed method is effective and efficient, enabling precise control of the production process of metal expansion joints.
Keywords - Laser Treatment, Laser Forming, Metal Expansion Joint,
Abstract: In this paper discussion and results of numerical simulation of metal expansion joint manufacturing was presented. Innovative manufacturing process combining mechanical forming supported by laser beam heating was described by authors. Advantages of precise heating of expansion joint surface during forming by laser beam was presented. The authors explained mechanism of expansion joint forming and its main functionality, which is compensate for temperature differences and stresses in construction materials. Stress-strain concentration caused by mechanical and thermal forces occurred during forming process was analyzed. Authors use numerical simulation based on Marc solver to investigate selected properties of manufactured expansion joints. Simulation was performed in order to obtained laser scanning parameters as well. High compatibility of simulation results with experimental studies was achieved. Based on thermo-mechanical analysis stress-strain distribution was investigated. Results of abovementioned analysis shown stress concentration in crest and elevated values in root area. Maximum values of calculated stress-strain distribution, however do not exceed critical values, therefore, no additional heat treatment is required. Obtained results confirm potential of proposed expansion joints forming process.
Keywords: Laser Beam Treatment, Numerical Simulation, MES analysis, Metal Expansion Joint,
Abstract - The presented article describes the general principle of operation of metal expansion joint (MEJ) manufactured by mechanically assisted laser forming. These details are important elements designed to compensate for temperature differences and limitations of construction materials. The authors described and analyzed the traditional method of producing metal expansion joints and drew attention to its limitations and potential problems. This work mainly focused on strength tests. The resistance of the MEJ to tensile forces was tested. The rest of the article presents the results of strength tests of the proposed method of hybrid production of MEJ. The authors focused mainly on the recorded parameters of the testing machine and the stretching process. The results are presented in graphs. The results of the tests confirmed that the proposed method is effective and efficient, enabling precise control of the production process of metal expansion joints.
Keywords - Laser Treatment, Laser Forming, Metal Expansion Joint