Bangkok, Thailand 21-10-2023
Abstract: This paper focuses on the design and structural analysis of roller gear for a semiautomatic portable noodles-making machine by changing roller gear face widths and three different materials (ASTM A 536, ASTM A 220 and AISI 1020). Gear corrosion occurs at contact points as a result of bending stress and contact stress. This is the major source of the gear failure of the semiautomatic portable noodles-making machine. This whole mechanism will be driven by a 180W capacitor-start induction motor according to the motor power selection. Pitch diameters of 50mm and module of 5mm spur gear is selected in the design of roller gear. In theoretical analysis, the Lewis bending stress equation is used. In the numerical analysis,the geometry is created by SolidWorks software. The minimum von-Mises stress and effective strain are found on AISI 1020 material by using ANSYS 17.0 software. In this paper, von-Mises stress and effective strainare analyzed by changing the face widths of roller gears to 8mm, 10mm, 12mm, 14mm and 16mm and using finite element analysis (FEA). Although all Face widths are safe for this design, 12mm is chosen in this paper due to power consumption and stress points of view.
Keywords: Noodles roller gears, Lewis Bending Stress, AGMA Contact Stress, Changing Face Width, FEA.
Abstract: This paper presents the investigation of flowcharacteristics inside the impeller passages with free inlet to free outlet (without casing). The air flow in centrifugal fan is complex with the interacting flow within the impeller passages. Numerical analysis was considered at the opening condition by using ANSYS 21.0 (CFD-CFX). The designed inlet impeller diameter is 0.128m and outlet diameter is 0.178m. The inlet and outlet span height are 0.03m. The inlet blade angle is 23° and the outlet blade angle is 30° respectively. The design flow rate is 3m3/min and design head is 4m. The rotating speed of impeller is 1500rpm.The working fluid is considered to be an ideal gas (air at 25°C). The flow velocity and differential pressure were analyzed in the upstream and downstream of the impeller passages.
Keywords: ANSYS 21.0 (CFD-CFX), Backward Curved Centrifugal Impeller, Flow Analysis, Without Casing
Abstract - This paper presents a comprehensive study on the implementation of a trapezoidal velocity profile for precise control of stepper motors using an ESP32 microcontroller, an A4988 stepper driver, and a NEMA17 stepper motor. The primary objective of this research is to achieve accurate and smooth motion control by generating a trapezoidal velocity profile, encompassing acceleration, constant velocity, and deceleration phases. The methodology involves a detailed explanation of the hardware setup, the algorithm for trapezoidal profile generation, and the incorporation of an inverse displacement function-based delay mechanism according to current step(pulse). Experimental results demonstrate the successful realization of the desired velocity profile and validate the effectiveness of the proposed delay control approach. The significance of this study lies in its contribution to enhancing the precision and performance of stepper motor applications, with potential implications in robotics, automation, and various other fields requiring precise motion control.
Keywords - Trapezoidal Velocity Profile, Motion Control, AS5600 Magnetic Encoder, Pulse Based Velocity Control
Abstract - This paper studies about the design and static structural analysis of worm gear in mini power weeder. Mainly, Lewis bending stress is affected on the face of worm gear with tangential force and bending moment is the next consider point for shear stress. Through that, von-Mises stress and effective strain are calculated under bending stress analysis of worm gear by theoretically. A 2.5 hp engine power and 6000 rpm worm speed mini power weeder is used in this paper to do worm gear bending stress analysis. AutoCAD 2019 software is used to model of worm gear and ANSYS 16.2 software is used to analyze static structural analysis of worm gear due to loading condition, with material properties of phosphor bronze, aluminum bronze, and tin bronze in this paper to find out the suitable material of worm gear for good performance. For the phosphor bronze material, the lowest von-Mises stress and effective strain are obtained. Thus phosphor bronze is found to be the suitable material for worm gear.
Keywords - Mini Power Weeder, Worm Gear, Static Structural Analysis, Lewis Bending Stress, Phosphor Bronze.
Abstract: Due to the COVID-19, the business performance is declining. However, the rapid transition to the use of information and communication technology (ICT) has increased. This means that ICT sector had more opportunities during this period. Thus, this paper aims to study the performance of companies in Information & Communication Technology (ICT) in the Stock Exchange of Thailand (SET) from year 2017 to 2022) by using financial ratios as measurement. Various statistic parameters are generated such as Minimum, Maximum, Skewness, t-test of different mean, and trend analysis and linear regression. The results show that there exist signals of worse performance in both solvency and activeness of this industry. While the companies were getting worse in their liquidity from COVID-19, they significantly improved their profitability in terms of ROA.
Keywords: COVID-19, Financial Ratio Analysis (FRA), Information and Communication Technology (ICT).