← All proceedings

THE IIER INTERNATIONAL CONFERENCE

Proceedings cover: THE IIER INTERNATIONAL CONFERENCE

Singapore 23-10-2016

2 papers

  1. A Comparison Between Weibull And Power Law Model in Estimating Conditional Intensity Function for Rainfall Data

    Nurtiti Sunusi

    Paper ID II-APMSGPR-23106-01 · Pages 1-3

    Abstract

    In this paper, we study the conditional intensity function (hazard function) of Weibull and Power law model for rainfall data. These models are fitted to the daily rainfall data from 2012 to 2016 obtained from Ngurah Rai station, located in Denpasar Indonesia. The maximum likelihood estimation is used to estimate the parameters of the model. The result shows that the determination of the value of the conditional intensity on a daily rainfall data indicate that the use of Weibull and Power Law models for α

    Download PDF
  2. Design Innvovation of Motorcycle Muffler By Applying Catalytic Converter Based on Non-Noble Material to Reduce Exhaust Emission

    Khairatun Nisa, Ratnaningrum, Megawati, Catur Rini Widyastuti

    Paper ID II-RIETSGPR-23106- 4702 · Pages 4-7

    Abstract

    Exhaust emissions from vehicles is one of the main sources of air pollution. The most effective technology to reduce emissions of Carbon Monoxide (CO) and Hydrocarbon (HC) is the application of the catalytic converter in the exhaust system of the motorcycle muffler. The commonly used catalysts are noble materials such as Palladium, Platinum, and Rhodium. In this study, Copper-Zinc (CuZn) and Copper (Cu) material has been selected as catalyst because it has high activity in the exhaust system, low cost production, the availability is abundant, and operated at a lower temperature than the noble material. Measurements of exhaust emission were carried out at 2000 and 2500 rpm using gas analyzer. Design innovation of CuZn and Cu catalyst were a cylindrical shape with 6.6 cm of length; 2.4 cm of diameter and 10 tubes in the inner of the cylinder. The purpose of this research was to compare the performance of two different types of catalyst. The research results showed that CuZn catalyst was effective to decrease CO emission up to 47.71% in 2000 rpm, while HC emission decreased up to 55.34% in 2500 rpm. Cu catalyst was effective to decrease of CO emission up to 46.61% in 2000 rpm, while HC emission decreased up to 47.13% in 2500. Copper-Zinc catalyst can reduce of CO and HC emission higher than Cu catalyst. Overall, CuZn and Cu catalyst has given a good performance due in accordance with regulation from Ministry of Environment in Indonesia No. 5 Th. 2006 about exhaust emission standard of old motor vehicle. Therefore, CuZn and Cu catalyst based on non-noble material has been considered as a prospective catalyst to reduce emission of CO and HC.

    Keywords- catalytic converter, exhaust emissions, non-noble material

    Download PDF