Bangkok, Thailand 05-07-2022
Maintaining the lightweight performance of sandwich structures while achieving good bending strength and stiffness is difficult. These programmable sandwich constructions use 3D printed core materials with hexagonal honeycomb, re-entrant honeycomb, and circular honeycomb topologies with varying core densities. Three-point bending tests are conducted to determined the bending strength and stiffness of these sandwich composites including an Acrylonitrile Butadiene Styrene core and a unidirectional carbon fibre reinforced polymer face sheet. The sandwich composite with the greater relative core density displays greater bending strength and stiffness than the composite with the lower relative core density. The sandwich composites beam with re-entrant honeycomb core exhibit the strongest bending strength and stiffness due to negative Poisson’s ratio. Experiments reveal that designed core structures can be sued to regulate bending qualities. These results provide characteristics for a broad variety of industrial and structural applications.
Keywords - Sandwich Beam, Honeycomb Core, Bending, Lightweight Structure.
Rice is world’s second most important cereal crop following corn and it is a major crop cultivated in many countries including Sri Lanka. Loss of grains occur through various means including pests. Among them, rodents cause significant damage to a wide range of crops including rice throughout the world. Bandicota bengalensis is the most abundant species in rice fields and Rattus rattus species is the most common type of house rats. Trapping is a common strategy used for scientific studies as well as for controlling them. To achieve a better trap catch it is essential to identify the most preferred baits for rodents. Therefore, in this study thirteen food commodities were evaluated to be used as baits and experiment was laid down in a CRD design with 3 replicates. Fifty rats from each species were introduced into cages and their consumption of different food materials was recorded separately after 24 hours from the rat introduction based on the remaining food mass. Same procedure was repeated again. The results indicated that R. rattus preferred to eat roasted coconut, cooked raw rice, ripened banana, and cooked parboiled rice whereas B. bengalensis preferred to eat short grain paddy rice, cooked raw rice and short grain raw rice. Findings can be used to develop successful rodent baited traps based on the available rodent type in future rodent management practices.
Keywords - Baits, Rodent Control, Grain Losses, Bandicota Bengalensis, Rattus Rattus,
In recent times there is a growing interest in vegetable coagulants for cheese-making, but only Cynara cardunculus is being effectively used due to lack of standardization of other species with milk-clotting properties. In this study, two experimental coagulants obtained from flower heads of spontaneous or cultivated OnopordumtauricumWilldwere used for the manufacture of Caciofiore cheese and compared to a commercial coagulant from Cynara cardunculus. With the aim of investigating the effect of the coagulants on the cheese microbial dynamics during ripening, a combined approach based on conventional and DNA-based (Illumina sequencing) analyses was adopted. Differences in bacterial biota and mycobiota were found depending on the coagulants, but their effect wasnegligible with respect to initial milk microflora. The similarity between experimental and control cheeses supported the potential use of the experimental coagulants.
Keywords - Vegetable coagulants, Cheese-making, Ripening, Microbial dynamics, Illumina sequencing.
Objective of this study is to investigate rock shear strength parameters of fault and shear zone at South Wall of Phu Kham open pit mine by direct shear testing. The test results are simulated in numerical models using distinct element method (UDEC code) under different slope faces and angles and shear strength parameters. The model results indicate that the safety factors of slope increase with increasing cohesions, friction angels and distances between fault and slope face, but decreases with increasing slope face angles. An empirical equation is derived here using the simulation results. It can be used to predict the safety factor of slopes under various slope face angles, cohesions and friction angles of the hanging wall. Distances between fault from crest are not derived in equation because they are not sensitive to the factor of safety.
Keywords - Slope Angle, Fault, Friction Angle
University student recruitment involves a large volume of enquiries of a fairly routine and predictable nature from a world-wide pool of applicants (Hancox and Polatidis, 2012). The opportunity to communicate on a one-to-one basis is highly valued (Polatidis, 2014).Chat-bot is one of those techniques that could play the role of assistant to the studentsand which can respond to admission information in 24-hour live chats and as frequently as neededas long as they are connected to the Internet (Goh & Lim, 2016). In this study, a Chat-bot is built using algorithm that analyses user’s queries and understands user’s message using Artificial Intelligence Markup Language (AIML) to develop its knowledge base, which is a well-known XML derived language used in case-based reasoning and textual pattern matching algorithms. The Design Science Methodology is used and the study aims to overcome the existing shortcomings of websites, prospectus, brochures and etc. through the big advantage of providing unwearyingly 24 – hour conversation as long as you are connected to the internet. The Chat-bot has the convenience of accepting text input and the replies can also be in text.
Keywords - Chat-Bot System, Student Information Enquiry, Web Based Systems, Artificial Intelligence Systems
This is an exploratory pilot study to identify the main factors that drive choice for assisted living and care facilities among potential residents and their families in Thailand. The research project was part of a client based learning module in a university senior business research course. The intention is for this project to lay the foundation for future research into measuring quality, satisfaction and behavioral intention in the assisted living and nursing care services industry. The client industry partner was a vineyard interested in building and operating an assisted living community, and what factors would be most important to consider in design and marketing to residents and their families. There are numerous studies and models on what factors contribute to resident and family satisfaction with health care services. There are also studies on what factors most influence choice and purchase intention in assisted living communities from a real estate perspective. This questionnaire was developed based on prior quantitative service quality and satisfaction research models, in combination with two rounds of qualitative focus group discussions with students on what factors they and their families consider important when choosing a care facility. In addition, the client was also interested in how important location and special dietary options are to choice, and whether those factors could be used to differentiate competing service offerings. As expected based on prior research, medical care and quality were the most important factors. However, technology and security were identified as second most important. Specific locations and dietary options were ranked highly by some segments and warrant consideration in follow up research.
Keywords - Aging Population, Assisted Living, Client Based Learning, Retirement Community
Background: Health literacy (HL) can be defined as the set of cognitive and social skills that determine the ability of individuals to access, understand and use information to promote and maintain a good health status. Objective: To analyze the relationship between the level of HL and the use of health services by university students. Methodology: This is a descriptive- correlational, cross-sectional study with a quantitative approach, with a sample of 351 undergraduate students. IBM SPSS (25.0) was used for data collection, using descriptive and inferential statistics. The level of significance was 5%. Results: Most of the students were female (69.5%), belonged to the age group of 18-23 years (72.4%) and were attending an undergraduate degree (65.05%). The ages were between 18 and 54 years, the mean being 23.54±7.43 years old. The highest proportion of students used the NHS (59.3%), used a doctor in the last 12 months 1 to 2 times (51.6%) and other health professionals 1 to 2 times (44.2%). Most students had limited literacy (66.4%). The categories of Global HL differed among students who used other health professionals in the last 12 months (2: p < 0.010), with the proportion of students who used 6 or more times being higher in the category of Excellent HL. Conclusions: Students' Global LS is predominantly limited, in convergence with the results obtained by other studies. The HL is related to the frequency with which students resorted to other health professionals, and these professionals seem to be the ones who most increase the HL.
Keywords - Public Health; Health Literacy; University Students; Health services.