Malaysia, 18-10-2014
ISBN 978-93-84209-57-5
Remanufacturing system is complicated due to its stochastic nature. Random customer demand, return product rate and system unreliability contribute to this complexity. Remanufacturing systems with unreliable machines usually contain intermediate buffers which are used to decouple the machines, thereby reducing mutual interference due to machine breakdowns. Intermediate buffers should be optimized to eliminate waste of resources and avoid loss of throughput. The problem deals with finding optimal buffer sizes to be allocated into buffer locations to achieve specific objectives. We develop a model for remanufacturing system based on realistic assumptions, with finite buffers, unbalanced and unreliable servers. We utilize the decomposition principle and expansion method for evaluating system performance and implement an efficient Meta-heuristic search algorithm to find an optimal buffer allocation. The computational experiments show a better quality, more accurate, efficient, reliable and fast of solutions obtained by the proposed algorithm. Finally, we apply proposed method on Toner cartridge Remanufacturing Company as a case study and present numerical results based on proposed methodology. Numerical experiments which are performed on our method are provided to show the efficiency and accuracy of the proposed algorithms.
Keywords- Buffer Allocation, Finite capacity, Meta-heuristic Algorithm, Remanufacturing.
Most reservoirs offer a mean of managing and regulating the downstream water flow and demands over time and space. It is a challenging task for the reservoir operator to evaluate the trade-off during drought and heavy rainfall season. This study proposes a review on the application of different computational intelligent models, especially the Artificial Bee Colony (ABC) approach in reservoir inflows and management optimization. For each model, their attempts and efficiencies along with difficulties are illustrated and well studied. The benefits derived from such comparison are used to improve the searching performance of existing models. ABC approach has gained a great potential in solving the reservoir optimization problem due to its powerful exploitation capabilities and high quality of optimal solutions. As a consequence, future works that include extend of handling a promising and viable optimization tool in an efficient and effective manner need to be further revised.
Keywords- Artificial Bee Colony, Reservoir Optimization
As what the researcher concerns, knowledge has become the route to success. On account of this understanding, many organizations today are facing the problems of controlling knowledge because they need to realize which knowledge will give them a competitive benefit. They face a hard job in detaining all the knowledge and make the knowledge effortlessly available to those in need. This paper review the concept of knowledge and knowledge sharing. The research attempt to review some of the existing definitions and methods of knowledge sharing context. The finding of this research can help academics and practitioners' better understanding of the concept of knowledge to overcome challenges, and taking the best method to share their knowledge in organizations.
Keywords- Knowledge, Knowledge Sharing, Tacit Knowledge, Explicit Knowledge, Knowledge Sharing Tools
Voltage sag is the most severe type of power quality problem faced by many customers. Therefore, in this paper voltage sag will be discussed as it is posed as one of the main focus in recent industries. The emphasis will be on power quality problem of voltage sags. Dynamic voltage restorer (DVR) is the selected mitigation device and the feedback control system is discussed in this paper. The results are obtained from simulation work by using MATLAB SIMULINK. The sequences of power injection and the impact of types of power on the cost of the dynamic voltage restorer are explained in the content. This paper also explains the process of detecting to injection of the magnitude of power to compensate the voltage sag.
Keywords- Dynamic Voltage Restorer, Power Quality Problem, Simulink.
The main objective of this work is to investigate the influence of shaft misalignment and backlash on the stress generated on the spur gear. Finite element analysis using ABAQUS software is used to determine the stresses and deflections on gear tooth. Three-dimensional finite element model of pinion gear engaged with a solid gear is created. The material is considered homogenous and isotropic with a linear elastic behavior. The gear pair contact position is chosen to determine contact stress assuming small sliding and dry friction contact. Appropriate loading and boundary conditions are considered. Based on the simulation, the influence of different values of misalignment angle and backlash on equivalent stress is examined. It is observed that the highest misalignment angle resulted in the highest generated tooth stresses. Moreover, it can be concluded that the results of this research should be helpful in the design and manufacture of spur gears.
Keywords- Finite Element Method, Stress Analysis, Misalignment, Backlash.
Brake system is the most significant safety aspect of an automobile. It must be slow the vehicle quickly and reliably under varying conditions. This paper aims to establish a brake test rig capable of measuring the performance of a drum brake at different operational and environmental conditions. The effects of dry and humid environment are considered under different applied forces and vehicle sliding speed. The experimental results showed a slight increase in the friction coefficients between drum and brake lining with increasing pressure or speed at dry and wet conditions.
Keywords- Drum Brake, Friction Coefficient, Applied Load, Vehicle Speed, Dry and Wet Conditions.
The two-dimensional thermal effect of sliding frictional contact of material thermal stresses is investigated in this paper. Products and machinery with moving components nearly always include parts which experience frictional forces. Often, only the structural contributions to the stresses and deformation of the parts are analyzed. Frictional heating, however, creates a conduction thermal gradient along the parts, which adds to the overall stresses and deformation. Models have been developed to analyze the thermal gradients due to frictional heating for simple geometry1. We intend to develop a frictional contact model which accounts for both the structural and thermal effects on stresses and deformation of our geometry and will verify our model through a combination of linear thermal elasticity and a simplified analytical thermal conduction analysis. The purpose of this complex model is to give a more realistic simulation of the contact surface. This paper will take an in-depth look at how the frictional heat generation is incorporated into commercial solver ANSYS and compare this to an analytical solution. To accomplish this task simple practical model of frictional problem will be used for both the ANSYS simulation and the analytical solution. To aid in verification of the two solutions, a loosely coupled MATLAB code will be used on the same geometry with reasonable approximations. With this verification we hope to show how to implement frictional heating in other model, and whether it is even important to account for the frictional heating.
Keywords- Frictional Heat Partitioning, Boundary Layer, Sticking Contact, Hot Spots.
In recent years, both sophistication and damage potential of Internet worms have increased tremendously. Since a new type of worm is written for each new exploit discovered, the only way to make network secure is development of systems that can react fast enough so that the spreading of any new type of worm is curtailed before it does much damage. To understand their threat, it is needed to look into their payload for signatures as well as propagation pattern for Internet-scale behavior. Traditionally, most modeling work in this area concentrates on the relatively simple random-scanning worms. Modeling the spread of permutation scanning worms can help us understand how these worms spread, and how we can monitor and defend against the propagation of worms effectively. A mathematical model is proposed that precisely characterizes the propagation patterns of the general permutation-scanning worms. In order to evaluate the effects of hit-list and permutation scanning a simulator is modeled based on discrete time system with vast internet and tested for all possible different cases. Through simulation setup we analyze that permutation scanning worms can infect the hosts in the network very fast and effectively compared to random scanning worms
Keywords- Worm attacks, Discrete Time System and Permutation-Scanning.
Feature extraction and representation is a decisive step for pattern recognition system. How to extract ideal features that can reflect the inherent content of the images as complete as possible is still a challenging problem in computer vision. Therefore goal of feature extraction is to improve the effectiveness and efficiency of analysis and classification.In this work we present a graph cut based approach for the segmentation of images of diseased cotton leaves.We extract color layout descriptors which can be used for classification. The diseases that have been considered are Bacterial Blight, Myrothecium and Alternaria. The testing samples of the images are gathered from CICR Nagpur, cotton fields in Buldhana and Nagpur district.
Keywords- Cotton Leaf Diseases, Gaussian Filter, Graph Cut, Color Layout Descriptors.
A peer-to-peer (P2P) network is one that does not have fixed clients and servers but a number of peer nodes that function as both clients and servers to the other nodes in the network. Association Rule Mining can be used for discovering hidden relationship between items stored in various nodes in the network . By given a user-specified threshold, also known as minimum support, the mining of association rules can discover the complete set of frequent patterns. In this paper, a Rapid Apriori algorithm has been proposed for reducing the cost and it reduces the database by removing unnecessary transaction records and data items from the database that are not used for further processing. The speed of algorithm is increased because it needs to scan only the reduced database and not the entire database. Then the top l elements or most frequent item sets are identified based on the effective Ant colony Optimization algorithm.
Keywords- Peer to Peer network, Rapid Apriori Algorithm, Effective Ant Colony Optimization Algorithm.