Tokyo, Japan 07.08.2019
The purpose of this research is to construct a disaster-exploration unmanned vehicle (UV) system based on multi-sensors. This UV system is integrated with the exploration unmanned ground vehicle (UGV), the injury ambulance UGV, and the unmanned aerial vehicle (UAV). Firstly, according to the task demands, three vehicles are all set up with the sensor module, core control module, motor drive module, and the remote control module. In addition, not only can the sensor module be applied to return back the situation of the disaster area, but it also collected the dynamic information of the vehicles to help to establish the accurate math models that will facilitate the subsequent designs of the stable controllers. Besides, additionally, we also set up the first aid box and the gesture control armband with the injury ambulance UGV. When the exploration UGV and the UAV send back the information of the injury location and the disaster area, the injured ambulance UGV will go to the injured location. If the injury person is conscious, then he can use the first aid box to carry out the simple treatment to avoid the injury worsening. If conditions permit, the injured person can also sit on the injury ambulance UGV and uses the gesture control armband to connect the core control module of the injury ambulance UGV. Then he can use some simple gestures to remotely control the injury ambulance UGV himself to return back to the hospital. Finally, in accordance with the different task characteristics, we design the adaptive controller and another various controllers to reduce noise and improve the robustness of the UV system. So that these designs yield the UGVs not only with the foundational functions of traction, navigation and obstacle avoidance, but also retain the considerable stability of the entire travel in the fact of unknown environment and unexpected disturbances. Even when encountering the sudden situations which require emergent obstacle avoidance, the UGVs can also taking into account the stability of smooth turn. These characteristics not only can reduce the vehicle vibrations to extend the components lives but also can help to extend the UV application in the areas of human factors engineering, such as the large-scale self-propelled public transportation could be developed.These stable controller techniques can effectively improve the comfort and stability of the carrying personnel or the precision material. Therefore, this study is really a practical and worthwhile research topic.
Keywords - Disaster exploration, Unmanned vehicle, Unmanned ground vehicle
The paper presents the study of deformations of materialespecially thestress concentrated area (fracture zone) causedby cyclic stresses by usingthe speckle interferometry. As a result, the physical structureof the materialinits fracture zonecan be analyzed more precisely.
Keywords - Speckle Interferometry, Stress Concentration, Material Fatigue, Cyclic Tests.
The ever-growing threatening waves of global environmental challenges have made it appear as if the mechanisms put in place towards global environmental governance are yielding little or no positive outcome. Numerous international legal and policy frameworks have been put in place in the form of treaties and convention which approaches are directed towards ensuring healthy environment both for the present and future generations. This article observes that the key players in the global environmental governance are the traditional states acting as the main targeted subjects of international obligation. It has also been observed that while successes have been recorded through the participation of non state actors, it is suggested that more need to be done. This work argues that to achieve effective global environmental governance, there is need for a human rights compliant mechanism, and public participatory scheme towards global environmental governance which is rooted in substantive and procedural rights jurisprudence.
Keywords - Environmental governance, Environmental Protection, Human Rights, Public Participation.
Value Engineering is used as a way to improve the value of buildings.In the design VE, the optimal design is selected by comparing the cost index and function index of the alternatives.However, the calculation range of the function index and the calculation range of the cost index vary depending on the indexing method.As a result, the client is confused by the decision-making process of selecting the optimal design.This study proposed a method to index cost and function scores using vector normalization method.
Keywords - Building Design VE, Cost Score, Function Score, Indexing.
It is very important in terms of cost and time to correctly estimate and compensate for the springback during sheet metal forming.Springback is the geometric change made to a part at the end of the forming process when the part has been released from the forces of the forming tool. Upon completion of sheet metal forming, deep-drawn and stretch-drawn parts spring back and thereby affect the dimensional accuracy of a finished part. The final form of a part is changed by springback, which makes it difficult to produce the part. As a result, the manufacturing industry is faced with some practical problems: Firstly, prediction of the final part geometry after springback and secondly, appropriate tools must be designed to compensate for these effects. In this study, the amount of springback was tried to be reduced by the application of the strainer bar which is used in sheet metal die industry in the process of deep drawing of the vehicle body part having a tensile strength value of 270 MPa. Finite element simulation results and the results obtained in the real environment has been validated. In addition to the work done, the effects of material thickness and modulus of elasticity on the amount of springback were investigated.
Keywords – Spring Back, Spring Back Compensation Algorithm, Finite Element Analysis, Deep Drawing Proces, Elasticity Module, Material Thickness, Drawbeads
The goal of this present study is to researchhow to motivate individuals to agree to an exchange of their electronic medical records (EMR) based on the perceived value perspective. We used survey methodology to collect data from 300 patients visiting a large hospital in southern Taiwan via questionnaires. Partial least squares is used to analyze the collected data. The results demonstrate that perceived value of EMR exchange and social influence are the primary factors influencingan individual’s willingness to exchange his/her EMR. Further, perceived benefits of and perceived privacy concerns of EMR exchange are associated with the perceived value of EMR exchange positively and negatively, respectively. Finally, internet health literacy is positively associated with perceived benefits of EMR exchange but not with the perceived privacy concerns of EMR exchange.
Keywords - Electronic Medical Records, Exchange, Perceived Value.
The study of school violence and safety ma require the review of different perspective in order to understand all the factors and variables that contribute to such a phenomenon. This study will present the arguments made on the cause, impacts and various programs and regulations that was discussed in the literature. However, such a review highlights the need to view the integration of such perspective and the various dynamics that caused by school violence. This study conclude that school safety is part of the different aspects that influence societies and communities i.e. cultural, social, economic and political.
Personal barriers such as lack of motivation, confidence work life balance etc. are often cited as barriers to women leadership. One of the key millennium development goals is reducing gender inequality in the society highlighting that the issue persists decades after acknowledgment of this being critical for overall human development. The state is more concerning in countries like Saudi Arabia where such issues have been left untreated due to socio-cultural pressures. As a result, these countries have legged significantly in human resource development. Overcoming this challenge requires countries to review the barriers that might be causing the problem. Saudi government has introduced several reforms within last one decade towards women empowerment such as the 2030 vision. These reforms may have improved the participation of women in workforce but have had limited impact on rise of women to leadership positions in Saudi Arabia. Past research have placed great emphasis on personal barriers such aspoor work life balance, familial responsibilities, lack of confidence etc. posing significant barriers to rise of women in leadership positions. This research looks at how these personal barriers have been influenced by the reforms undertaken by the Saudi government and what additional measures can be undertaken to overcome these personal barriers. Data for this research was collected using semi structured interviews with Saudi women working in Saudi higher education institutions. Data was thematically analysed. Results indicate that Saudi women have faced a number of personal barriers in rising to leadership positions with lack of motivation and opportunities as well as poor work life balance opportunities being the most critical of these barriers.
Keywords (JEL codes) - Higher Education, Teachers, Education and Gender, Education and Inequality, personal barriers, Gender Discrimination, Women.
The study was conducted to determine the effect of untreated and urea, lime and urea/lime treated groundnut (Arachis hypogaea) shells in a complete diet fed to growing Yankasa ram lambs. Four treatment diets were formulated containing 40% untreated, 40% urea treated, 40% lime treated and 40% urea and lime treated groundnut shell. Twenty Yankasa ram lambs were used and randomly assigned to the four treatments with five animals per treatment in completely randomized design (CRD). The diet was formulated to have 15% crude protein (CP) content. The growth trial lasted for 90 days.Organic matter (OM) among the treatment diets ranged from 85.18 to 86.53% and lime treated diet has the highestbut crude protein content was more in urea/lime/ treated diet, and least CP was in urea treated diet. Parameters measured were daily weight gain, feed intake, feed conversion ratio, nutrients digestibility, nitrogen balance, blood metabolites cost and apparent profit. The growing ram lambs on urea/lime treated diet had the highest average daily weight gain (94.66g/d). In feed conversion ratio ram lambs on lime treated diet had the least mean values (8.94) and were significantly (P
The purpose of this paper is to examine the relationships between vision and staff satisfaction in Thai retail chains, by taking into account vision realization factors of vision communication, organizational alignment, empowerment of staff, and motivation of staff. Data were derived from store managers and staff of 144 retail chains, located in Bangkok Metropolitan Region, where selling food, household, and consumer goods. The studied variables were tested for significant relationships through structural equation modeling (SEM). Vision, characterized by seven attributes of brevity, clarity, future orientation, stability, challenge, abstractness and ability to inspire; and embraced four content imageries of sales, leadership, consumer, and employee, was the indirect predictor of staff satisfaction. Empowerment of staff and motivation of staff were the direct predictor of improved staff satisfaction, while vision communication was the indirect predictor of enhanced staff satisfaction. Organizational alignment was removed due to low alpha value.
Keywords - Vision / Vision Realization Factors / Visionary leadership / Retailing / Thailand
Keywords - Bankruptcy discharge, Bankruptcy pre-rehabilitation.
The study analyzed maize production economic efficiency using cost minimizing Data Envelopment Analysis (DEA). Factors affecting economic efficiency were determined using Ordinary Least Squares (OLS) regression model. The study used secondary annual data from 1971 to 2010. The result revealed that the country registered 100% economic efficiency score at a frequency of 4 which accounted for a low level of economic efficiency of 10% of the total observations. Mean efficiency values are found to be 90.5%, 77% and 69.3% for technical, allocative and economic efficiencies, respectively. This implied that, the country can reduce inputs levels by 9.5% and still produce the same quantity of output at the given technology. Costs of inputs can also be reduced by 23% and still produce the same output level through better allocation of resources, at the given technology. The result revealed that from 1971 to 1975 on average the country’s efficiency scores are 99.2%, 78.8% and 78.3% for technical, allocative and economic efficiencies, respectively. The result further indicated that, from 1991-1995 the country recorded full allocative efficiency score of 100%, while technical efficiency score represents 99.6%. From 2001-2005 on average the country has efficiency scores of 100% and 99.5% for technical and allocative efficiencies, respectively. From 2006-2010 the efficiency scores represent 99.5%, 94.1% and 93.7% for technical, allocative and economic efficiencies, respectively. For the determinants of economic efficiency, the result showed that, research and development spending; producer price and number of tractors in use had positive and significant impact on economic efficiency. Therefore, they should be the policy priorities for improving maize production economic efficiency in Nigeria.
Keywords - Allocative Efficiency, Economic Efficiency, Data Envelopment Analysis, Technical Efficiency, Ordinary Least Squares Model, Maize
This case study focuses on a toddler’s (2-year old) language development as an effect of being exposed to three languages with various kinds of exposure. This aims to address the following questions regarding the child’s present language developments and simultaneous development. The first part focuses on her language developments in terms of: a.) early language development b.) phonological development, c.) semantic and syntactic development, d.) pragmatic development and e.) vocabulary development. The second part focuses on simultaneous development. What factors affected the child’s simultaneous development? How has her exposure to various languages affected her? Will her exposure to various languages create confusion or delay in her language development? These questions will be answered in this case study.
Keywords - Bilingualism, Code-Switching, Language Acquisition, Language Development, Multilingualism, Protowords
This paper presents a wideband Electromagnetic Band Gap (EBG) resonator antenna operating in V-band which can be used in an array configuration to achieve a high gain over a large frequency band. The results of both single element antenna and a 2×2 array are presented, verifying the wideband capability of the proposed structure.
Keywords- Antenna Arrays, Antenna Design, Broadband, Electromagnetic Band Gap (EBG) Resonator Antennas, EBG Structures, Directive Antennas, Satellite Communications, Wideband Antennas.