← All proceedings

256TH THE IIER INTERNATIONAL CONFERENCE

Proceedings cover: 256TH THE IIER INTERNATIONAL CONFERENCE

Barcelona, Spain 23.09.2019

6 papers

  1. Comparaison between PID and Fuzzy PID Control for DJI F450 Quadcopter Stability

    Benmouiza Khalil, Oubbati Youcef, Souffi Abdel Ghani, Mahdjoub Wafik Mohamed, Benmouiza Abderrahmane, Rahmani Asma

    Paper ID II-RIETBARC-23099-16133 · Pages 1-6

    Abstract

    A quadcopter is a flying machine, which equipped with four motors to create lift and achieve a vertical flight, it could also stay stable in a hover position to make a determinate job as collecting data in a defined area, such mapping or taking areal phots or scanning earth topography. However, stability of quadcopters is an essential for better flying experiences. Hence, we propose in this paper, a comparative study between PID and fuzzy PID controller in order to test the stability of the movement of the quadcopter. This study was applied in the famous DJI F450 quadcopter frame. The results show an effective comparison with full review of both control schemes that helps for further implementation and stability of such kind of quadcopters.

    Keywords - Quadcopters, PID, Fuzzy, Stability

    Download PDF
  2. Example of Cross-Disciplinary Approach in Education

    Richard J. Kirton, Igor A. Gorlach

    Paper ID II-RIETBARC-23099-16381 · Pages 7-12

    Abstract

    Engineering education in the modern world requires a cross-disciplinary approach in order to better prepare learners for diverse and complex problems that engineers need to solve in a real industrial environment. In this paper, the process of the development of a Computer Numerically Controlled (CNC) machine is presented. CNC machines are commonly used for a variety of engineering manufacturing applications in many modern industries. It is, therefore, considered particularly important that students from various engineering streams be given adequate exposure to modern CNC machines, their design, programming and control. As a result of this project, a cost-effective CNC router with the application of engraving was developed. The CNC router can also be used as an educational tool to teach junior students or school learners the basics of modern manufacturing machines and systems. The synergetic combination of mechanical, electrical and software engineering is evident in the design of the CNC router. The design process follows the systems engineering approach to teach learners to adhere to the classical engineering methods and apply correct design tools and software. Following all the steps, from design to implementation and to testing, students can better understand the complexity and interdependability of tasks in engineering.

    Keywords - Training and Education, Design, Engineering, CNC Machines

    Download PDF
  3. Value of Course “Doing Business in Russia and CIS” for Students at Business Schools: Impact on their Competencies and Future Skills

    Olga Kanashina

    Paper ID IRES-ICESSMDRD-22099-11286 · Pages 13-16

    Abstract

    Background: There is incredible profit potentials from conducting business in Russia, Kazakhstan, and other ex-Soviet Union Republics in Central Asia and Europe; however, the vast majority of European business schools especially in Spain lack a program teaching how to open and run a successful business in former Soviet Union Republics and Russia. Incorporating a class about the popular trend of doing business in Russia and CIS (Commonwealth in Independent States) among European Graduate Business schools teaching economics has the potential to positively impact business school graduates.
    Methods: A literature search identified a lack of information regarding the topic “Doing business in Russia and Commonwealth in Independent states” in European business schools. Because of the shortage of literature to inform the course, a faculty with personal experience conducting business in that region developed a new course “Doing business in Russia and CIS” for Master degree students of the Global Business School Barcelona (GBSB).
    Results: two credits elective course was developed. 10 students took the class. Feedback of this 1 semester course collected from students taking and passing it was very positive.
    Conclusion: In the framework of globalization, Russian market is one of the perspective arenas for ongoing investment. Future businessmen learning how to conduct business in that region provide an advantage to building a successful career

    Keywords - Management Education, Doing Business, Higher Schools, Russia, CIS

    Download PDF
  4. Change of Microstructure of NB MicroAlloyed Steel at Start of the Plastic Flow during the Cold Deformation

    Ljerka Slokar Benic, Stoja Reskovic, Marijan Marcius, Tin Brlic

    Paper ID IRES-ICMTMMDRD-22099-10779 · Pages 17-19

    Abstract

    Microstructure has significant impact on the properties and behavior of materials, so it is a subject of intensive investigation nowdays. In this paper, special attention is paid to study on the beginning of the plastic material flow in Nbmicroalloyed steel during the cold deformation. Specific behavior of this steel can present a significant problem during the metalworking in terms of inhomogeneous deformations appearance. Due to many available methods now it is possible to observe what is happening during the deformation of certain material. Hence, investigation of material flow and stress distribution in deformation zone is growing up today. Therefore, the aim of this work was to establish the change of microstructure of low carbon steel microalloyed with niobium at start of the plastic flow during the cold deformation. For that purpose Nbmicroalloyed steel was hot rolled into strip and then static tensile test was carried out. Thermography method was used to study the changes of temperature during the deformation. Microstructure before and after deformation was observed by scanning electron microscope. These investigations showed the fine grained ferrite-pearlitic microstructure and its significant changes at start of the plastic flow during the cold deformation.

    Keywords - Cold Deformation, Microstructure, Niobium Microalloyed steel.

    Download PDF
  5. Investigation of Antioxidant Properties of Hypericum Heterophyllum Vent. as an Endemic St. John's Wort (Yellow Centaury) Species in Turkey

    Omer Hazman, Mustafa Kargioglu

    Paper ID II-RAMSBARC-23099-14690 · Pages 20-23

    Abstract

    The use of plants for pharmaceutical, food and cosmetic purposes has started with the existence of humans and has continued until today. Phytochemicals are considered as one of the cornerstones of pharmacy in the past. Today, more than 20,000 plants are included in drug formulations and are used for complementary treatment as well as clinical treatments. One of the plants used for this purpose is Hypericum perforatum (St. John's Wort or yellow centaury). Studies on the effects of many types of endemic species have not yet been made. In this study, it is aimed that investigation of antioxidant properties of Hypericum Heterophyllum Vent. as an endemic yellow centaur species in Turkey. Total antioxidant capacity (TAC), total oxidant capacity (TOC) of the plant species (Hypericum Heterophyllum Vent.) were analyzed. The oxidative stress index (OSI) was calculated to interpret the possible effect of the plant on the oxidative stress that may occur in organisms. TAC and TOC analyzes were carried out on the crude samples obtained after drying and homogenous decomposition of the leaves, branches and flower parts of the plant. The TAC levels of Hypericum Heterophyllum Vent. were found to be 2.22 mmolTroloxEquivalent/L and TOC levels were 42.41 µmol H2O2 Equiv./L. OSI levels were calculated as 1924 AU. These data indicate that Hypericum Heterophyllum Vent. have high antioxidant capacity. For this reason, antioxidant power can be shown as the reason for its use in various diseases.

    Keywords - Hypericum Heterophyllum Vent., St. John's Wort, antioxidant and oxidant activity

    Download PDF
  6. Subjective Health Status and Immigration: Evidence Across Europe

    Sofia Xesfingi, Dimitrios Karamanis, Alexandra Kechrinioti

    Paper ID II-SSEBARC-23099-16199 · Pages 24

    Abstract

    Background: Subjective health status and migration are critical issues in healthcare policy and strategic decision making. There are many health challenges to resolve and at the same time, migration has reached to historic highs, leading to different views among immigrants and natives, policy makers and habitants.
    Objective: Our research focuses on the subjective health status reported by European habitants, on its differentiation with respect to participants origin, and on whether various demographic, macroeconomic and other factors, such as the foreigners’ presence in a country, affect it.
    Setting and participants: Using survey data of 227,200 respondents from 22 countries and over the period 2002-2016, and employing logit estimation techniques, we analysed the effect of demographic, macroeconomic and other factors in shaping respondents’ subjective health status.
    Results: Our results demonstrate the important role of all demographic factors in shaping respondents’ subjective health status. Immigrants report a higher subjective health status, while macroeconomic conditions and foreign presence in a country do play an important role. A country healthcare provision state and health expenditures can moderate the negative effect of foreigners’ presence and thus the reported health status of natives.
    Conclusions: The factors influencing subjective health status are complex and interdependent. However, government policies should increase social cohesion, since, the latter is not only related to health care outcomes but also can be a tool for disseminating social inequalities.

    Keywords - Immigration, Europe, ESS, Subjective Health Status

    Download PDF