← All proceedings

222ND THE IIER INTERNATIONAL CONFERENCE

Proceedings cover: 222ND THE IIER INTERNATIONAL CONFERENCE

Rome, Italy 25-02-2019

4 papers

  1. To What Extent Might Speciality Training in Inhaler Technique for Healthcare Professionals or Access to Regular Asthma Reviews and Follow ups Influence the Proportion of Patients Who are Being Properly Trained and Assessed on Appropriate Inhaler Technique?

    Kaotar Azoui, Esra Karakasli, Lorna Eyre, Anp Paula Spooner

    Paper ID RF-ICMHSMILA-26029-4509 · Pages 1-6

    Abstract

    BACKGROUND/AIMS:
    Poor inhaler technique has been linked to poor Asthma management1. Thus, there is a need to identify factors that contribute to improper inhaler technique. This study investigates the association between the level of speciality training of clinicians and the access to Asthma clinics on inhaler technique in patients registered at Stanley Health centre.
    METHODS:
    This study follows a retrospective and service evaluation design. Once ethical approval was granted, questionnaires were distributed to patients with Asthma at Stanley Health Centre. The questionnaires investigated influential factors, including patient demographics, education background, awareness on inhaler technique and number of Asthma attacks in order to identify critical errors. Patients were then formally assessed on inhaler technique by their respective clinician.
    RESULTS:
    64.3% of patients from the study population observed correct inhaler technique: 83.3% of these patients were seen by a specialist Nurse who was adequately trained in Asthma management. The remaining 16.6% of these patients were seen by other clinician’s void of specialist Asthma training. Patients with access to Asthma clinics accounted for 77.7% of those who demonstrated correct inhaler technique. However, 70% of the 35.7% patients who failed to meet the criteria of correct inhaler technique were seen by healthcare professionals who did not have additional training in Asthma management.
    CONCLUSIONS:
    Patients who were seen by specialist trained Asthma nurses with regular access to Asthma clinics were most likely to acquire proper inhaler usage. There is a correlation between inhaler technique and Asthma control, hospital admissions and quality of life (QOL). Thus, Asthma management should target inhaler training to reduce key critical errors.

    Download PDF
  2. Multilayer PLA/TPU Shape Memory Biocomposites

    Cerentabak, Mehmet Kodal, Guralpozkoc

    Paper ID II-CBEROME-25029-13366 · Pages 7

    Abstract

    Due to its biodegradability and biocompatibility,poly(lactic acid) (PLA) serves in biomedical and in-vivo applications, such as bone screw, catheters, and scaffold, etc.ln many of these applications, the shape memory properties of the materials is needed. Shape memory polymer (SMP), a new class of stimuli responsive materials, has shown a fast response in changing their temporary shapes to original shapes when subjected to a certain stimulus, such as temperature, light, electric field, pH, etc. The shape memory behavior of PLA comes from the presence of crystalline and amorphous phases. Crystalline phase acts as the rigid phase that is responsible from energy storage during the temporary shape and the amorphous phase acts as the switching phase. However, the shape transition temperature of PLA is not suitable for physiological condition and its shape recovery ratio is relatively low. The blending of PLA with high molecular weight flexible polymers is a quiet simple and an economical method to optimize its properties. Thermoplastic polyurethanes (TPUs) are one of the mostly used blend components to be used in PLA based compounds since they are biocompatible, biodegradable and partially miscible with polyesters. It is well known that TPU is soft and has the ability to recover from a temporary shape to its permanent shape due to its superior entropic elasticity. It was shown in the literature that the blends of PLA/TPU system exhibited good shape memory properties than dispersed phase blends. As a special co-continuous morphology, the multilayer structure is widely existing in nature. In this study, biodegradable and biocompatible PLA/thermoplastic polyurethane (TPU) layered composite structures were prepared and their shape memory properties investigated as a function of temperature and layer structure. In addition, the mechanical, thermal and adhesion properties of layered composites were also measured.

    Download PDF
  3. Properties of Nanofibrillated Cellulose/ Polypropylene Composites

    Ceren Tabak, Serhatkeskin, Tughanakbasak, Guralpozkoc

    Paper ID II-CBEROME-25029-13367 · Pages 8

    Abstract

    The importance of biochemical nano-supplements is increasing day by day as they are environmentally friendly and they reduce dependency on petroleum-based products. Cellulose is the most abundant natural, renewable and biodegradable polymer on the earth. This biobased nanomaterial has been used mainly in nanocomposites due to its outstanding reinforcing potential. Production of the nanofibrillated cellulose (NFC) from native cellulose and their use as reinforcement agent in polymer composite materials has gained increasing attention due to its unique features such as high strength and stiffness, low weight and biodegradability. Nano-fibrillated cellulose (NFC), a new generation nano-reinforcing material, is produced by mechanical breakdown and is consisting of flexible, intertwined nanofibers, whose length ranges from 10 to 100 nm. NFC opens the way towards intense and promising research on nanocellulose-based materials with expanding area of potential applications, including transparent materials, packaging materials due to their high mechanical properties and low gas permeability rates, biomedical applications and production of paper with better sheet properties such as tensile strength. However, there are certain drawbacks in cellulosic materials such as their incompatibility with hydrophobic polymers, their sensitivity to humidity and lower thermal stability which reduce their use as reinforcement in polymer composites. One of the methods to improve the compatibility of NFC wit polymers is to modify the surface of cellulose. Surface modification based on polymer grafting, coupling agents, acetylation and cationic modification can be used in order to improve compatibility and homogeneous dispersion within polymer matrices.Polypropylene (PP) is one of the most widely used polyolefin in packaging. Besides its high mechanical properties, the gas permeability properties of PP limits its use in barrier film applications. In this work, it is aimed to improve the gas barrier properties of polypropylene, by incorporating powdered NFC using melt compounding technique. Samples were obtained by melt film casting technique prior to compounding. Compatibility between NFC and polypropylene is attempted by silane modification of NFC or by reactive modification of the matrix using maleic anhydride grafted polypropylene. The structure-property relationship of the obtained composites is investigated by mechanical, thermal, morphological and rheological tests. The results showed that mechanical properties were deteriorated by NFC, however gas barrier properties were enhanced.

    Download PDF
  4. The Effect of POSS on the Adhesion Between Polyester Cord and Natural Rubber

    Nazli Yazici, Samet Dursun, Tugay Yarici, Burak Kiliç, Bagdagul Karaagac, Mehmet Kodal, Guralp Ozkoc

    Paper ID II-CBEROME-25029-14252 · Pages 9

    Abstract

    Natural rubber (NR), a biopolymer, is produced by the rubber tree, Heveabrasiliensis, as a latex. NR is often used as a matrix in tire manufacturing process where it is reinforced with resorcinol formaldehyde latex (RFL) coated textile cords, such as polyester fibers, to improve adhesion between cords and fabrics. On the other hand, RFL coating process has many disadvantages. One of them is its toxic chemicals. The aim of this study is to improve the adhesion properties of polyester fiber utilized as tire reinforcing materials, to the NR compounds by using polyhedral oligomeric silsesquioxane(POSS) nanoparticles. In this study, metacryl POSS (M-POSS), which is a new generation additive/reinforcing filler, has been incorporated to a model (reference) NR based skim compound. M-POSS was assumed to directly accompany with vulcanization reaction thanks to its double bonds. It is also expected that it can chemically and/or physically interact with skim compounds via their reactive side groups. Adhesion characteristics of the compounds have been investigated by means of strip H-adhesion tests and thermodynamic work of adhesion measurements. Thermodynamic work of adhesion values were calculated for rubber matrix and reinforcing fiber couples. Distinguishing cured and uncured surface energy enabled to evaluate pure adhesion and possible reactions during vulcanization, separately. It was concluded that incorporating M-POSS to NR based skim compound improved the adhesion between rubber matrix and polyester fiber.

    Download PDF