← All proceedings

221ST THE IIER INTERNATIONAL CONFERENCE

Proceedings cover: 221ST THE IIER INTERNATIONAL CONFERENCE

Istanbul, Turkey 06-02-2019

8 papers

  1. Electrochemıcal Oxıdatıon of Wastewaters Contaınıng Antıbıotıcs

    Ayşe Kurt, Taner Yonar

    Paper ID IA-ICENSANTL-07029-10985 · Pages 1-8

    Abstract

    Synthetic chemicals polluting water resources are increasing day by day in terms of variety and component. Such as hospital and drug factory discharges with high endocrine disrupting pharmaceuticals are very dangerous and need further consideration. Antibiotic compounds are the most dangeroustypes of endocrine disruptor pharmaceuticals, for the microorganism resistance and they have widespread use in our country and around the world.However, conventional treatment methods are inefficient for their removal from wastewaters. Various advanced treatment methods such as carbon adsorption, advanced oxidation processes (AOP), membrane processes are proposed for the removal of antibiotics instead of conventional methods.Electrochemical advanced oxidation processes (EAOPs) show both the conversion performance of pollutants to harmless products by oxidation and the lower energy consumption requirement due to the use of direct current compared to other AOPs.Another advantage of the EAOPs is the less need for additional chemicals and pH arrangement.Because of these reasons, in this study, for the removal of antibiotics,the role of electrochemical advanced oxidation processes and combinations of them with other AOPswere considered. In most of the studies, it was seen that, full mineralizations were achieved at shorter reaction times and this increased the biodegradabilities.Also, in researchs it was seen that the application of Sn/Sb/Ni-Ti anodes are very limited. These anodes were highly tested in electrochemical ozone production and are known to be more successful than older generation PbO2 and Pt anodes.

    Keywords - Antibiotic, β-lactam, macrolids, fluoroquinolones, endocrine disruptors, electrochemical oxidation, ozone, anodic oxidation

    Download PDF
  2. Applied Achievements of Physics and Modern Technologies in Changing The Climate

    Maryam Shabbir

    Paper ID II-APMISTA-06029-13710 · Pages 9-13

    Abstract

    The status of global warming and climatic change of the different regions of the world has led to more attentiveness of academic communities to the future crises caused by drought and climatic change in mountainous areas and deserts. Desired control of local and regional climate is directly depended on recognition of interaction of the particles in the atmosphere. Full dominance on the processes is important for optimal and effective use of modern equipment and technologies the discussions of climatic change from the fertility of clouds to controlling the atmosphere conditions at the developed countries has possessed large amount of research budgets. At the developed countries, different methods are used for fertility of clouds and changing the local and regional climate. With the managerial perspectives to this field, scholars tend to extend their strategic-military power. Hence, recognition of modern equipment affecting atmosphere and analysis of their operation mechanism in management of climate of developing countries in improvement of local and regional climate plays key role in the sustainable development. According to the effect and interaction of atmosphere particles, in the recently used academic sources, using powerful electric fields from the ground surface is considered because of low cost and easiness of implementation of applied projects. In all proposed models, identification of physical and chemical interactions of cloud environment and atmosphere space is important. Hence, this study has emphasized the evolution of particles and their interaction in atmosphere and has studied the effect of additional electromagnetic fields on change in the process of atmosphere rainfall.

    Index terms - Climatic Changes, Atmosphere Ionization, Electric Discharge, Condensation, Precipitation

    Download PDF
  3. CFD Instraction Guide to Simulate Two-Phase Flow Separation in a Vertical T-Junction Separator

    Raid Ahmed Mahmood

    Paper ID II-RIETISTN-06029-14169 · Pages 14-18

    Abstract

    Two-phase flow separation has been investigated by many researchers due to its important role in the most industrial applications. In refrigeration and air conditioning systems, two-phase flow separation influence the system performance. So, many techniques have been used to separate liquid phase from gas-liquid two phase flow and consequently to improve a system performance. T-junction is one of the techniques that can be used to obtain effective two-phase separation. In order to investigate the two-phase flow separation in very simple way and obtain wide accurate range of results, computational work is the appropriate solution. Computational Fluid Dynamics (CFD) software is one of the most effective computational way that can be used to visualise two-phase flow separation and design two-phase flow separator. This paper presents an instruction of CFD simulation to predict and visualize the two-phase flow separation in vertical T-junction and a comparison between the CFD results with therelated experimental results to validate the CFD results. ANSYS 17.1 was used to carry out the simulation. The geometry of the T-junction was generated by the ANSYS modular design based on the dimensions of experimental test section, then lunched to the ANSYS meshing to generate a suitable mesh.

    Keywords - Two-Phase Flow, Two-phase Separation, Vertical T-junction, ANSYS Fluent 17.1, Visualize Two-Phase Flow.

    Download PDF
  4. Sulfate-Reducing Bacteria Biofilm Growth Inhibition in Inject Sea Water by Green” Zno-Interlinked Chitosan Nanoparticles

    Kashif Rasool, Ravi P Pandey, P. Abdul Rasheed, Khaled A Mahmoud

    Paper ID II-CBEISTN-06029-14197 · Pages 19

    Abstract

    Biofilm formation is a major problem in many industrial processes including oil and gas industry. Among the anaerobic microorganisms, sulfate-reducing bacteria (SRB) are one of the most important groups commonly associated with microbial corrosion. Biocides and corrosion inhibitors are generally used to disinfect the water and to inhibit biofilm growth. However, conventional biocides are not efficient and environment friendly. In this first systematic study, we synthesized a “green” and highly stable biocide formulations composed of ZnO interlinked chitosan nanoparticles (CZNCs) and applied it to inhibit the growth of SRB culture enriched from real oil field sludge. CZNCs showed great stability in highly saline inject seawater and significant inhibitory effects to sulfate reduction and organics oxidation. The inhibition of SRB activity was concentration-dependent and more than 73% and 43% inhibition of sulfate reduction and organics oxidation, respectively, was observed at 250 µg/mL CZNCs at 10% initial ZnO loading. Much higher LDH release of 113.48% coupled with SEM analysis suggested cell membrane disruption. Moreover, extracellular polymeric substances (EPS) from SRB biofilm showed a decrease in concentrations of carbohydrates, proteins, humic substances, and lipids in the presence of CZNCs. CZNCs did not show any significant specific acute toxicity or teratogenic phenotype at any of the concentrations tested. On the basis of obtained results we present CZNCs as a “green” biocide which is expected to be beneficial for industry against biofouling and reducing the risks of piping corrosion, reservoir souring, and improve surface facilities lifetime, with minimal impact on the environment and marine life.

    Keywords - Biocide; Chitosan; ZnO; SRB; Biofilm Inhibition; Acute Toxicity, Zebrafish

    Download PDF
  5. Business Flow Management in Communication Based Train Control Systems

    Şebnem Gökdeniz, M. Raşit Okan, Ilker Üstoğlu

    Paper ID II-RIETISTN-06029-001 · Pages 20-23

    Abstract

    Today, global competition is growing rapidly in every field of work. There is an increasing trend towards quality all over the world and consumers' expectations about quality are increasing. The prerequisite for being in these conditions is always to keep up with the dynamic structure of the age, to be open to changes and innovations and to adapt new systems, techniques and technologies to their bodies. Otherwise, organizations are doomed to be stayed behind. On the other hand, there have been significant changes in manufacturers' views on quality. It is understood that rather than paying attention to the quality of the finished product, to achieve quality in every stage of a production process is more importantThis system is applied not only in the sectors of production and services but also in Information Technology. Kanban techniques have been developed and implemented recently to control the parameters affecting product and process management, to manage and optimize their deviations. Kanban, Lean Startup, MDD and IDC business flow techniques of Communication Based Train Control Systems (CBTC) in the Railroad Systems using are investigated in this study.

    Index Terms - Automation, Communication, Signalization, Train Control, Kanban

    Download PDF
  6. Speed Observer and Motion Controller Design for Permanent Magnet Synchronous Motors

    Onur Gürleyen, Ilker Üstoğlu

    Paper ID II-RIETISTN-06029-002 · Pages 24-35

    Abstract

    Permanent magnet synchronous motor’s (PMSM) three phase stator currents are decomposed into flux generating current and torque generating current using mathematical Park and Clarke transformations and decoupling methods, so that PMSM is controlled like DC motor with high efficiency and with high performance. PMSM is controlled cascaded control structure consisting of three main control loops which are current, speed and position control loops and current loop consists of two loops which are d current, related with flux, and q current, related with torque. One of the most important criteria while designing cascaded control loops is bandwidth. Control loop with higher bandwidth means, lower settling time that defines how fast control is occur. While designing control loops with desired bandwidth, small overshoot is acceptable for current loop; However, overshoot and steady state error for position control loop and for speed control loop are undesirable. Moreover, for low speed application speed observer is necessary, since incremental encoder resolution is decreased in low speed control. According to mentioned problems and design criteria, in that paper it is described that current loop with state feedback decoupling, PID controller with pseudo feedback derivative current controller design, speed control loop with approximate first order transfer function using PI controller with no overshoot and no steady state error, proportional (P) position controller guaranteeing no overshoot in desired bandwidth and that PID liked full order speed observer with approximated first order transfer function.Controllers and observer designs are simulated in Matlab Simulink

    Index Terms - PMSM, Motion Control, Cascaded Control, Pseudo Derivative Feedback, State Feedback Decoupling, Bandwidth, Speed observer, Speed Control with no overshoot.

    Download PDF
  7. Sulfure Removal from Urban Sewage in Bioelectrochemical Process

    Sara Ahmadi, Reza Marandi

    Paper ID II-CBEISTN-06029-14413 · Pages 54-58

    Abstract

    Bio-electrochemical new technologies can, in wastewater treatment, convert the energy stored in the chemical bonds of biodegradable organic materials through the catalytic reaction of microorganisms into renewable electrical energy. The purpose of this study was to investigate the efficiency of a single-cavity bio-electrochemical system without catalyst as a simple and inexpensive method for removing corrosive and sedimentary sulfur compounds from urban sewage with indigenous bacteria. In this study, bacteria were isolated from urban sediment and sediments as Substrate was used. During the six months of the lead, the sulfate concentration reached at least 63 ± 57.2 mg / l, indicating the system's ability to remove 76.7% of sulphate from municipal wastewater and generate bioenergy. Maximum COD removal was 80% and maximum density was 54 W / cm3 and 82/1 W / cm2. The presence of elemental sulfur in sediments showed that these systems have the capability to optimize the recovery of elemental sulfur from urban sewage.

    Index Terms - Sulfur Removal, Urban Sewage, Bio-electrochemical Process, Reducing Bacteria.

    Download PDF
  8. A Parallel Detection and Decoding Technique for MIMO Communication Systems

    Wurod Qasim Mohamed, Karim Hamidian

    Paper ID ID-CEEE-ISTN-04029-1701 · Pages 59-64

    Abstract

    Two of important requirements of fifth generation new radio (5G- NR) access networks are very high capacity and ultra-reliability. In this paper, we proposed a V-BLAST N_t × N_r MIMO system that is analyzed and improved, and expected to achieve both very high throughput and ultra-high reliability simultaneously. A new detection technique called parallel detection and decoding algorithm is developed and compared with existing linear detection algorithms. It was seen that the proposed technique increases the speed of signal transmission, provides high throughput and prevents error propagation, which may be present in serial decoding techniques. The new algorithm reduces the bit error probability and increases the capacity simultaneously without using STC. However, it was seen that the BER of MIMO systems using the proposed algorithm is higher than a similar systems using standard STC technique, and it is lower than system using MGSTCs technique. Simulation results show the advantages of the proposed technique.

    Index terms - Index Terms_ MIMO, Parallel Detection and Decoding, V-BLAST.

    Download PDF