Dubai, UAE 01-12-2018
This paper is designed to educate and the public about the basic aspects that they need to be aware of when they need a household water borehole while appreciating the risk the associated with the processes based on experience in Southern Africa. This is important because installation of borehole is a cost intensive processes, thus ordinary citizens need to make informed planning and decisions. Basic definitions of terms associated with the main professionals and processes involved when installing a borehole are given using non-technical language which speaks to ordinary citizens. The paper discus some of the main reasons that generally contributes and influences ordinary citizens to end up having the need for a household borehole. There are a number of important aspects for ordinary citizens to consider during planning prior to the installation of a house borehole. Ordinary citizens must understand that the process to locate a suitable drilling spot is a relative process influenced many natural factors and due to that there is always a risk failure to get water. Ordinary citizens should therefore also be prepared for that risk of failure after incurring expenses. It is hoped that this non-technical information can help ordinary citizens to plan and decide cost effectively effectively about installation of a household borehole.
Keywords - Borehole; Groundwater; Drilling and SADC
The construction industry has a major impact on the emerging economy of a developing country. A common problem affecting the delivery of projects (private or public) is delay, which has a significant negative effect not only on the local state (Emirate) but on the UAE economy as a whole. The purpose of this paper is to determine the critical delay factors that affect UAE industry. This was achieved by a deep study of the literature and by carrying out a questionnaire survey with expert field engineers to collect their opinions. As seen by these engineers, the top five factors are as follows: changes of orders, delays in decision-making and approval by clients, contractors’ financing difficulties, poor site management and supervision by contractors, poor control of project progress.
Private sector employers continue to resist employing nationals despite the nationalization strategies implemented by the Gulf Cooperation Countries (GCC) to increase national labor participation. The paper explores private sector employers’ resistance in the GCC to employ nationals by reviewing current literature review. The resistance is evident through the literature review explored in GCC countries like Oman, United Arab Emirates and Saudi Arabia. The resistance of private sector employers merits further investigation as private sector employers play a crucial role in nationalization strategies implementation. The literature review reveals a need to address change processes directed to overcoming the resistance by private sector employers. The paper explores private sector employers’ view towards national labour participation, specifically in the Kingdom of Bahrain owing to the lack of published research about Bahrain national participation in the labour market “Bahrainization”. The study is conducted through a qualitative methodology of conducting semi- structured interviews with private sector managers and government officials. The data reveals that the lack of co-ordination with education and training with labour market needs does not form nationals as employees of choice in Bahrain.
Index Terms - Nationalization, Bahrainization, Culture, Education, National Labor Participation
Computer experimentation technique has been commonly applied as an alternative approach to physical experiment in engineering, science and technology in the recent time. It is more accepted than the classical physical experiments due to its flexibility when developing computer experiments and building metamodels of computer models. Sometimes, it is used to complement or serve as a proxy to real life or physical experiments. Experimental design is rapidly growing since it is useful to both physical processes and computer or simulation models. In this study, an Orthogonal Array Latin Hypercube Design, OA (N, k ) LHD was used to develop simple pendulum computer experiments. The OA (49, 3) LHD was adopted in the development of simple pendulum computer experiments using a simple pendulum model. This model was used to simulate a simple pendulum experiment that is conventionally performed in the laboratory. A Support Vector Regression (SVR) model was employed as a computer based metamodel to mimic the simple pendulum computer model in order to reduce the required computational efforts in running the computer codes and predict the stoppage time of pendulum at untried inputs. The SVR algorithm was used for modelling and analysing simple pendulum computer experiments. MATLAB 2016 software was used to implement the SVR algorithm with B-Splines kernel function so that the SVR model adequately captures non-linearities in the simple pendulum computer model. The e-insensitive loss function was set at e=0.05 and C=8 in order to control the support vector regression model. Results obtained using the SVR model with B-Splines function trained with only 85.7% of the experimental runs with zero bias. The fitted SVR model predicted values that were close to the test data as shown in Figure 1.
Index Terms - Computer Experiments, B-splines Kernel Function, SVR Model, Orthogonal Array Latin Hypercube Design, Simple Pendulum Computer Model.
The aim of the present paper is to find an interesting integral involving I-function of several complex variables. The result is derived with the help of a theorem given by Gupta K C and Agarwal S M in their paper entitled “Substitution theorems for integral transforms with symmetric kernels”. We obtain the Laplace transform of I-function of several complex variables as preliminary result.
Index Terms - Laplace Transform, I-function, Incomplete Gamma function, Mellin-Barnes integrals, H-function.
E Sampath Kumar and L Pushpalatha [2], defined a new type of complement as follows; Let G = (V,E) be a graph and P ={V_1,V_2,…,V_k} be a partition of V of order k ≥ 1. The k-complement G_k^P of G (with respect to P) is defined as follows: For all V_i and V_j in P,i ≠j, remove the edges between V_i and V_j , and add the edges which are not in G. The graph G is k-self complementary (k-s.c.) with respect to P if G_k^P≅G.
A graph G is k-co-self complementary (k-co.s.c.) if G_k^P≅G ̅.
The m^thpower G^m of an undirected graph G is another graph that has the same set of vertices, but in which two vertices are adjacent when their distance in G is at most k.
In this paper, we obtain some results on the k-self complementary and k-co-self complementary powers cycle graph. Also we obtain all C_n^2 which are k-self complementary and k-co-self complementary.
Keywords - k-complement, k-self complementary, k-co-self complementary, Powers of Cycle Graph.
H.B. Walikar in 2003 defined partial complement of graphs. For a finite undirected graph G=(V,E) and a subset S of the vertex set V of a graph G, the partial complement of a graph G with respect to S is the graph denoted by ¯(G_S )=(V,E_S) where E_S=E(≤S>)∪ E()∪{uv|u∈ S,uv∉ E\ }; denote the subgraph of G induced by the set S and ≤ S > denote its complement and ¯((S) ), the usual complement of a set S .
In this paper we defined energy of Partial complement of graph and obtained spectra of some standard graphs. We also computed several bounds for partial complement of graphs.
Keywords - Partial Complement Spectrum, Partial Complement Eigen Values, Partial Complement Energy of Graphs.
In the present investigation, semi-numerical solution techniques are used to understand the stagnation point viscous flow of an incompressible fluid between porous plates by incorporating suitable velocity slip conditions. The governing equations of motion is solved by two novel techniques: Computer extended series method and Homotopy analysis method. The domain and rate of convergence of the series so generated are further increased by Pade approximants. The above methods admits a desired accuracy. The validity of series solution is extended to a much larger values of R, Reynolds number with different slip coefficients.
Keywords - Computer Extended Series, HAM, Slip Velocity, Stagnation Flow.
The purpose of this study is to provide a thorough overview of certain constructs in business ethics (BE) and show the ever increasing discrepancy between the discipline of BE and the actual practices taking place in the real business environments. BE seems to draw an ever increasing attention academically, but on the other hand, malpractices and unethical implications seem to be reaching more critical heights. Thus, it looks as though, in our modern day and age, having grasped profound understanding of BE actually has not helped reduce any of the major wrongdoings. In this regard, the wide gap existing between theory and practice clearly deserves more proliferation. This paper aims to help our understanding of the severity of the contemporary problems faced and shed light onto future research.
Index Terms - Business Ethics, Sustainability, Unethical Corporate Behavior, Future Considerations
This paper presents a detailed parametric finite element study predicting the through-thickness thermal conductivity of reinforced concrete slab. The influence of three main structural parameters are investigated, which are: the concrete slab thickness, the steel bar diameter, and the spacing between two adjacent bars aligned in the same direction. The steel bar diameter found to be the dominant factors that influences the thermal conductivity of the slab
Keywords - Thermal conductivity, reinforced concrete slab, finite-element modelling.
In this paper, we propose an image enhancement algorithm to improve license plate extraction rate in various environments. The proposed algorithm is composed of image enhancement algorithm and license plate extraction algorithm. The proposed algorithm employs an interpolated Probability Distribution Value (PDV) in order to control a sudden change in image brightness. Probability distribution value can be calculated using Cumulative Distribution Function (CDF) and Probability Density Function (PDF) of the captured image, whose values are achieved by brightness distribution of the captured image. Also, by adjusting the image enhancement factor of each part region based on image pixel information, it provides a function that can adjust the gradation of the image in more details. This processed gray image is converted into a binary image, which fuses narrow breaks, eliminates small holes, and fills gaps in the contour by using morphology operations. Then license plate region is detected based on aspect ratio. The images have been captured by using a video camera. The captured images have included several license plates on multilane roads. Simulation has been executed using OpenCV and MATLAB. The results show that the extraction success rate is more improved than the conventional algorithms.Potential applications includes vehicle parking facilities and campus security system for permitting authorized vehicles into the premises.
Index Terms - Probability Distribution Value, Car License Plate Extraction, Contrast Enhancement, Cumulative Distribution Function, Genetic Algorithm, IntelligentTransportation system
In this paper, the effectiveness of TCP congestion control mechanism is investigated against smart meters. The conventional congestion control mechanism leads to packet loss rate and that disrupts the flow of traffic in shared and metered network, respectively. The performance analysis of proposed aggregated TCP mechanism is studied and takes into concern spanning tree for mapping the data to destination. This method uses Regional Collectors (RC) to acts as an aggregation device in transport layer. This helps to reduce the packet loss and optimises the traffic in Smart Metering Infrastructure (SMI). The performance of SMI is analysed in terms of loss rate, throughput and latency using extensive NS-2 simulation.
Index Terms - Smart Metering Infrastructure, Aggregated TCP, Spanning Tree, Transport Control Protocol
Laser tissue ablation is taking important roles in surgical and medical applications. Therefore, it attained great attention from researchers to continuously enhance its therapeutic outcome. In this paper, Er:YAG laser tissue ablation was investigated using computational model. The model assumed laser tissue ablation a water surface vaporization process. Pulse duration was varied by two order of magnitudes and was found to have significant influence on the ablation outcome. The model predicted the existence of optimum pulse duration value that maximizes ablation rate while minimizes thermal damage. Determination of the exact value of such optimum will be investigated in future works.
Keywords - Surface Vaporization, Laser Model, Ablation, Thermal Damage, Pulse Duration