← All proceedings

194TH THE IIER INTERNATIONAL CONFERENCE

Proceedings cover: 194TH THE IIER INTERNATIONAL CONFERENCE

Bangkok, Thailand 05-10-2018

9 papers

  1. Parametric Optimization Of Electroless Ni-P Coating Using L9 Orthogonal Arrays

    Rishav Kumar Baranwal, Subhasish Sarkar, Sameer Lamichaney, Chanchal Biswas, Siddhartha Mukherjee, Gautam Majumdar

    Paper ID ID-MMICE-PHKT-05108-1311 · Pages 1-4

    Abstract

    Coatings are one of the rising techniques to stop degradation of metals’ surface from corrosive pitting and wear. Electroless Ni-P coatings were developed and successfully deposited over Copper substrate.The coatingwas varied by varying the concentration of the metal source, Nickel Sulphate and the reducing agent, Sodium Hypophosphite.The corrosion rates of all the coatings were measured using Tafel Tests. Taguchi modelling was done with the help of L9 orthogonal arrays with corrosion rate as the response parameter. The optimized sample was obtained based on the Signal to Noise ratio of individual levels of the coatings. The level 1 and level 3 of the above mentioned factors were the optimized parameters. The optimized sample was characterized using Energy-Dispersive X-Ray Analysis, Scanning Electron Microscopy. Energy-Dispersive X-Ray Analysis showed the Ni-P coating was a medium Ni-P coating.

    Index Terms - Coating, Taguchi, Signal to Noise Ratio, Scanning Electron Microscopy.

    Download PDF
  2. The Development Of How To Set Plant Layout Using Craft Methods With Vba On Microsoft Excel

    Jumpon Kunyuan, Nara Samattapapong

    Paper ID ID-MMICE-PHKT-05108-1464 · Pages 5-8

    Abstract

    The purpose of this research is to develop methods for plant layout design. It is well know that layout design, when there are more departments, the probability of the schemes plant layout and number of time calculate cost will be greater too. Such as in this paper, the possible pattern equals 190 patterns (duplicate pattern not included). So in this paper, the researchers develop Visual Basic for Application (VBA) coding on Microsoft Excel programs can help find patterns of plant layout with transport cost as low as possible and also reduces repetitive calculation errors.

    Index terms - Plant Layout Design, CRAFT Methods, VBA, Transportation Cost.

    Download PDF
  3. The Effect Of Tio2 Volume Fraction On The Microstructure And Magnetic Properties Of Mnal Thin Film

    M.A.I. Nahid, Mikihiko Oogane, Miho Watanabe, Yasuo Ando

    Paper ID II-APMBNGK-05108-12925 · Pages 9-11

    Abstract

    The effect of TiO2 doping on MnAl films are systematically studied. The MnAl:TiO2 thin films were prepared by co-sputtering using MnAl and TiO2 target at a growth temperature of 300°C. DC sputtering was used for MnAl while RF sputtering was used for the case of TiO2.The magnetic and structural properties of MnAl:TiO2 films were also studied. The incorporation of TiO2 into MnAl have significant change on the structure and magnetic properties of MnAl films. With the incorporation of above 7.5% TiO2, the -phase is completely destroyed. The perpendicular coercivity of MnAl:TiO2 films was found to change with TiO2 content, and obtained maximum at 5%. The change in roughness of MnAl:TiO2 films were also observed. The roughness of MnAl:TiO2 thin films increases with the incorporation of the TiO2 and then decreases with the increase of TiO2 content.

    Keywords - Epitaxial growth, buffer layer, -phase, magnetic anisotropy constant.

    Download PDF
  4. Intellectual Capital To Improve The Performance Of Project-Based Firms

    Li-Ren Yang

    Paper ID II-SIMBNGK-05108-12210 · Pages 12-16

    Abstract

    Intellectual capital is the most valuable resource of any enterprise. This empirical investigation examines the causal association between intellectual capital and the success of project-based firms in the industry. More than 100 project-based firms across Taiwan have each been assessed for the levels of human capital, structural capital, relational capital, and firm performance. These results suggest that structural capital and relational capital are achieved with greater human capital. The analysis also shows that structural capital fully mediates the impact of human capital on the success of project-based firms. In addition, relational capital may partially mediate the association between human capital and the performance of project-based firms. The results of the analyses are consistent with previous theories, which suggest that an effective way to increase intellectual capital is to appropriately invest in employees.

    Index Terms - Project, intellectual capital, human capital, financial performance, operational performance

    Download PDF
  5. Learning From Trading With Ambiguous Information

    Ido Kallir, Aharon (Roni) Ofer

    Paper ID II-SSEBNGK-05108-12543 · Pages 17-23

    Abstract

    In this paper we study long-term learning process under the conditions of ambiguous information. We study a unique empirical setting in which pieces of the ambiguous information about the value of corporate bonds are sequentially provided to institutional investors. We use parametric and non-parametric models to show that exits a continual convergence process that it is non-linear. We show that the learning process is strict and that the convergence is towards an unbiased point that represents the set of prices which are dictated by the available information. The theoretical and experimental literature on learning processes is rich, but there are only a handful of empirical studies. We contribute direct empirical evidence that supports important theoretical and experimental predictions.

    Keywords - Ambiguous Information, Learning Process, Trade, BondsJEL Code: G12, G23, G24

    Download PDF
  6. Perceived Gap Of Administrative Practices At A Tertiary Institution In South Africa

    Mpanza N, Green Pe, Sentoon

    Paper ID II-SSEBNGK-05108-12958 · Pages 24-28

    Abstract

    The rendering of quality and efficient service in higher education has remained a topic issue extending over a decade yet current research still indicates the necessity to glean from previous experiences. HE institutions have to be concerned not only with what society values in terms of skills and abilities of their graduates, but also with how their students feel and perceive their education, and the quality of HE throughout educational curricula and administrative processes. Institutions must view students as their primary clients and seek to maximize their satisfaction based on educational services rendered. Using a quantitative approach this research evaluated administrative practices in three selected Technical and Vocational Education and Training Colleges (TVET) in KwaZulu-Natal.

    Download PDF
  7. Vehicle Industry Of Japan And Market Intensity

    Hiroyuki Matsuoka

    Paper ID II-SSEBNGK-05108-13100 · Pages 29-31

    Abstract

    The vehicle industry’smarket intensityof Japan depends on the type of automobiles made. The overall market situation is competitive. Almost all vehicles made in Japan are Japanese brand. In the case of other countries and areas, some countries are more competitive such as China, England, Italy, and so on. However, the situations are different. On the other hand, in monopolistic countries and areas, like Taiwan, India, and Pakistan, Japan’s influence is very big. But in Korea and France, the marketsare largely occupied by their own companies’ brand. By the way, we have to note the development of electric vehicle(EV)and other new technologies because they will give a great impact on the vehicle industry and market of Japan.Now Japan’s vehicle industry is going to be divided into three groups, Honda, Toyota group, and Renault-Nissan-Mitsubishi group. Therefore, from now on I will check the worldwide development of EV and other new technologies and the reorganization of auto companies groups.

    Keywords - Vehicle Industry, Market Share, Herfindahl-Hirschman Index, Electric Vehicle(EV), Reorganization of Industry.

    Download PDF
  8. The Factors Affecting The Choice Of Yunnan Residences On Outbound Tourism

    Xinyi Deng, Piyaluk Buddhawongsa

    Paper ID WR-BMSI-BNGK-05108-4298 · Pages 32-36

    Abstract

    Since as an important economic industry in Yunnan Province, tourism has made an increasingly significant contribution to the national economy and social development in the province. This study used the sampling size is 400 tourists, the paper questionnaires to empirically analyze the influencing factors of tourists’ choice. To examine factors affecting the choice of outbound of Yunnan tourism. Logit model is used to estimate the macroeconomic factors affecting the choice of outbound tourism or not. Only use socioeconomic as the variables. And to investigate the factors affecting Yunnan outbound tourists destination of choice. The multinomial logit model has been the most commonly used model for analysis of discrete choice data. Use the both socioeconomic and destination characteristics as the variables. Based on the results of this study, the paper proposes several contributes to the tourism agency and government policy.

    Index terms - Outbound Tourism, Yunnan, Destinations choices, Factors affecting, Binary and Multinomial Choice Model.

    Download PDF
  9. Experimental Investigation On Usage Of Cottonseed Oil And Esterifies Cottonseed Oil As Lubricant In IC Engines

    Siraskar Gulab Dattrao

    Paper ID AW-IACETIPATTYA-06108-7236 · Pages 55-59

    Abstract

    Due to growing environmental concerns and the depletion of the world’s crude oil, vegetable oils are finding their way into lubricants for industrial and transportation applications. Emphasis on the development of renewable, biodegradable, and environmentally friendly lubricants has resulted in the widespread use of natural oils and fats. The substitution of mineral oil with vegetable oil as a base stock for an environment friendly lubricant in a CI engine is explored in this study without adding any additives. The experiments have been conducted with cotton seed oil, and compared with SAE20W40 mineral oil. The viscosity and engine oil temperature. The engine performance and emission tests were carried out on a single cylinder, water cooled, 4-stroke CI engine. Bio based lubricant gave give good result and their viscosity was within range, the test were carried out for 96 hours it is observed that bio based lubricant start deteriorating after 96 hours of working. To improve life performance of cottonseed oil esterfication is done and then it is tested on single cylinder SI engine with blend of which shoes improved result.

    Keywords - bio degradable, lubricant, cotton seed oil , esterification, I.C. Engine

    Download PDF