Kuala Lumpur, Malaysia 01-09-2018
In blood testing, evaluating whether a person has anemia usually uses hematology analyzer to analysis some factors, such as Hemoglobin (Hb), Red blood cell (RBC), mean corpuscular volume (MCV), etc. However, hematology analyzer is very expensive for general clinics. In order to solve this problem, this thesis proposes a new estimation method based on 2-dimensions blood smear images to develop a mechanism that can help doctors to do diagnosis.The proposed method judges whether the red blood cells belong to one of five anemia blood classes according to the shape of single RBC in blood smear images. These five classes are Acanthocytes, Schistocytes, Circle, Oval, and Teardrop.
Index Terms - Segmentation, RBC, Morphology, Genetic algorithm.
There are many inspection stations in the IC packaging process to ensure that the quality in the manufacturing process is consistent and stable. In the past, the large amount of manpower was required to use a microscope to check for quality defects. We propose an inspection method for IC packaging processes to collect the images of the three visual inspection stations behind the welding line site, analyzes the differences in the characteristics of good and bad products, and uses these feature values to distinguish them. We hope to reduce labor costs, production cycle time, and misuse of defective products through automated inspections.
The inspection method is divided into three stages. In the first stage, we focus on incoming substrate defects. The image divided into the foreground and background by Otsu threshold selection method. The connected-component labeling method calculates the area of the image and distinguish defective products. In the second stage, we focus on the defects of die bonding, using the area of the marker to find the corners of the substrate lead, and the horizontal projection pixel accumulation method cuts out the upper and lower metal lead images, then cut out the IC by its proportion. Finally, use Canny edge detection, Hough line conversion method to find the edge of the IC and calculate the angle of the line to determine whether the IC chip is skewed, drained, or offset. In the last stage, we focus on the defects of wire bond. Use the connected-component method to determine whether the wire breaks or leaks, and use the ratio to find the solder joint on the IC to determine whether there is a connection error.
In this study, the image identification is segment into the three parts of defect recognition procedure respectively for calculating the recognition accuracy. From the experimental results, the recognition accuracy of abnormal substrate can reach 100% in first part of procedure, and the recognition accuracy of abnormal die bonding can reach 97% in the second part of procedure, and the recognition accuracy of abnormal wire bonding can reach 100% in the third part of procedure.
Index Terms - AOI, Image Process, Die Bonding Inspection.
We have investigated the bonding state of Diamond-like carbon (DLC) films by X-ray photoelectron spectroscopy (XPS). Different types of the DLC films (tetrahedral amorphous Carbon: ta-c and amorphous Carbon: a-c) were prepared on silicon wafer using a T-shape filtered arc deposition system (T-FAD). As a result of performing argon ion etching in order to remove the oxide film on the DLC film, the main component of the XPS C 1s spectrum became sp2 hybrid orbital. We have obtained experimental results that sp3 hybrid orbitalis the main component of this ta-c samples by several evaluation methods. Therefore, repeating the low energy etching cycle, as a result of increasing the waveform separation method to 4 components, the sp3 surface component were decreased by etching, and sp2 bulk component strength was increased.
Keywords - Diamond-like carbon, XPS, ta-C, a-C.
The rolling process is considered to be one of the most crucial operational units in the manufacture of finished and semi-finished bulk products. Predicting the final product properties is important because it can aid technologists in determining the adequate process variables required to produce a particular product with predefined characteristics. However, modelling such a process is not a trivial task, in particular when it is significantly affected by many variables and carried-out at high temperatures, the so-called hot-rolling mill process. In this research work, an integrated network based on computational intelligence is presented to model the hot-rolling mill process. In such a network, the output can be predicted via two phases. The first phase consists of a number of models that are trained using the process inputs and the target output (i.e. product characteristics). The second phase relates to utilizing the predicted outputs from the first phase as well as the target output to train another linear or nonlinear model in order to produce the final predicted output. Validated on real industrial data, it has been shown that such a modelling structure has the ability to deal with sparse data and to accurately predict the characteristics of the hot rolled products.
Index Terms - Computational Intelligence, Hot-Rolling Mill, Integrated Networks, Radial Basis Functions, Steel Sections.
Leadership challenges stemming from contemporary issues have meant that the way we conduct business has changed and so the way we choose leaders must also change. Although much leadership research and selection methods exist, their discourse does not clarify practical applications for choosing leaders in these uncertain times. The current work aims to address this matter by attempting to answer the question: Is there a straightforward way of choosing leaders based on undeniable criteria? The essay draws a distinction between emergent and assigned leaders to pinpoint factors that are not accessible for leader development but inherent in effective leadership. Possible explanations for how those who attained leadership positions came by them are put forward and interviews with managers revealed that assigned leaders were mostly chosen from among emergent ones subjectively or because of seniority but not through formal personnel selection methods. In addition to measures recommended by psychologists for choosing leaders, the present paper proposes to concurrently employ weighted criteria and distinguishing factors, namely, personality traits, natural characteristics (whether physical, mental or circumstantial), and gift elements. This conceptual model describes the suspected relationship between the identifiable constructs, emergent leaders, and effective leadership with the aim of assisting leadership decision makers to forecast and choose leaders in more practical ways.
Keywords - Emergent Leadership, Leader Assignment, Leader Selection
This study analyses the impact of oil price shocks on Malaysia stock market using daily time series data for the period of 1987-2017. The Autoregressive Distributed Lag (ARDL) approach and Toda Yamamoto (1995) causality test are used to aid in the analyses of the study. Through the ARDL approach, the bound test results indicate the existence of a long-run relationship between crude oil and stock market returns. This study has discovered that oil price shocks have significant positive impact on the Malaysia stock market both in the long-run and short-run. On the other hand, the causality test reveals a unidirectional causality running from oil return to stock return. These results have important implications for the decision-making by policymakers.
Keywords - Oil price shocks, Stock market return, Autoregressive Distributed Lag, Toda-Yamamoto
The present research has been conducted on the semantic reconstruction of the meaning of life in rural communities of MishKhas from the area of the Ilam province. Given the interdisciplinary nature if this concept and the lack of a conventional approach in this field, grounded theory method were used. First, 34 villagers were studied through Semi- structure interviews and initial information was obtained by purposive sampling and theoretical sampling methods. Data was analyzed using coding strategy in three steps i.e. open, axial and selective coding. Initial product of the analysis was to achieve 34 concepts and 12 main categories. In the aftermath of the extracted categories, a collocation was conducted that its result was the identification of a central category i.e. “Collective mechanical life”. Collective mechanical theory emphasizes that despite the experience of modernity over the past decades, rural communities still demand the preservation of the model of Collective life as a lost model.
Keywords - Construction, Meaning of Life, Grounded Theory, Semantic Reconstruction, Rural Communities.
The purpose of present research is to study multicultural education in the content of textbooks of primary education in Iran. This research has been qualitative and has used qualitative content analysis method with conventional (inductive) approach. Purposive sampling method was used. The sample consisted of Persian (Farsi), social studies and Heaven gifts textbooks of all grades of primary education. Here, analysis measure is content and image, and context measure is textbook. In this research, 9 categories were extracted including the history and identity of ethnoses, the introduction of different cultures, introduction of cultural heritage, introducing celebrities, reflection of dressing style of ethnoses, introducing and paying attention to the languages of Iranian ethnoses, religious pluralism, introduction of celebrations, festivals and religious rituals of the ethnoses, and cultural traditions of ethnoses. Qualitative content analysis of textbooks showed that only the trace of dominant culture is in textbooks. The education system seeks the implementation of a cultural assimilation model that leads to the destruction of languages and cultures of the Iranian ethnoses.
Keywords - Textbooks, Primary Education, Multicultural Education.
Nursing is not an easy occupation because nurses deal with critical issues every day that make it a stressful job. The purpose of the current study is to identify the stressor factors that cause stress to Kuwaiti nursing students. This study employed a quantitative approach using a questionnaire survey to collect the data from 57 bachelor nursing students. The questionnaire consisted of 10 variables that can cause stress to the nursing students which are as follows: 1) theory, 2) examinations, 3) assignments, 4)workload, 5) classrooms hours, 6) clinical placements, 7) the death of a patient, 8) relationships with ward staff, 9) relationships with nurse tutors, and 10) relationships with clinical placement coordinator. The results of the current study demonstrated that the highest factors that caused stress to the nursing students were: the death of a patient, examinations, and theory. While the lowest factors that caused stress to the students were: relationships with ward staff, relationships with clinical placement coordinator, and relationships with nurse tutors. These results showed that the academic issues stress students more than the clinical issues. At the end of the study recommendations for educators and researches have been provided.
Keywords - Nursing Students, Stress, Clinical Factors, Academic Factors
This work constitutes a study on enhancement in heat transfer coefficient using Al2O3-25% Ethylene Glycol solution nanofluids. The experiments were conducted using 0.1%, 0.2% and 0.3% volume fraction of Al2O3 nanoparticle dispersed in 25% Ethylene Glycol solution. The effect of agitation speed and temperature was studied by conducting experiments at agitation speeds of 200-800 rpm and temperature of 320-340 K. Three blade propeller and four blade pitched turbine were used to provide agitation to fluid. The effect of baffles in vessel was also studied. The results showed significant enhancement in heat transfer coefficient for baffled condition as compared to unbaffled conditions. Due to better flow pattern, heat transfer coefficient is higher for rushton turbine when compared to three blade pitched propeller. Heat transfer coefficient was also found to increase with increasing temperature, agitation speed and volume fraction of nanoparticles.
Keywords - Agitated vessel, Al2O3-25% Ethylene Glycol Solution, Heat Transfer Coefficient, Jacketed Vessel, Propeller, Pitched Turbine
Leonurus sibiricus which known as a Motherwort, it is a member of the family Lamiaceae and native to India and central and Southwest Asia, including China, Mongolia, and Russia. Moreover, now it is naturalized in many other parts of the world including South, North and Central Americas. Headspace solid-phase microextraction / Gas chromatography–mass spectrometry (HS-SPME /GC-MS) was optimized to identify the volatile bioactive compounds in the leaves and for the first time, the flower nectar of Australian grown Leonurus sibiricus. The alcohol 1-Octen-3-ol (octenol) was identified as the most abundant constituents of the flower with nectar and the leaves from Leonurus sibiricus grown in Australia. It made up more than 50% of the total volatile compounds in both sample types. It is the most common volatile compounds in straw mushrooms and has also been found in blue cheeses, and in some fruit sources, such as orange juice oil, raspberries and elder flowers as well as in Australian prawns and sand-lobsters. It is also known to attract biting insects such as mosquitoes and indeed, it has been used in mosquito traps. Australian grown L. sibiricus should be highly considered in the production of octenol for using as flavouring agent.
Index Terms - Gas chromatography–mass spectrometry, Headspace solid-phase, Leonurus sibiricu, Octenol .
The study investigated climate change related factors and the management of primary schools in Benue State. Two research questions and two hypotheses guided the study. Descriptive survey design was adopted for the study. The population comprised 15,987 teachers from 2,407 primary schools in Benue State. A total of 780 teachers from 122 primary schools were selected using proportionate stratified random sampling technique. Climate Change Related Factors Questionnaire (CCRFQ) was used for data collection. The data collected was analyzed using mean and standard deviation to answer the research questions and chi-square to test the hypotheses at 0.05 level of significance. The findings revealed that changing rainfall patterns and flood significantly impact on the management of primary schools in Benue State. Based on the findings of the study, it was recommended among other things that school management should take precautionary measures in maintaining school facilities that are exposed to continuous rainfall. Ceilings should also be installed in the classrooms to avoid unbearable noise that may be caused by the sound of rainfall.
Keywords - Climate Change, Changing Rainfall Patterns, Flood & Management of Primary Schools.
The researcher aims to explore the existence of familial kinship in the hospitality workplace setting, identify service touch points exhibiting kinship and describe perceived kinship in the workplace from Filipino hotelier's perspective. Extensive literature has been examined in the course of the study establishing the linkages for the research purpose. Familial kinship when utilized as leverage for extending quality in the hospitality setting would foster and strengthen internal work synergy. The said study would provide a benchmark for other hotel management organizations in the Philippines to improve their daily operations whilst maintaining the cultural identity of the Filipino. Qualitative and quantitative methods were utilized in gathering the data with the questionnaires. Analysis of the data was through comparison of the front and back of the house, marital status, employment status and rank. The study confirms the premise that job status, rank and designation does not have an influence on individual culture. Individual culture is affirmatively contributing to organizational culture where kinship as the mediating factor that influences work place culture which confirms the assumption that, Filipino work place kinship is essential to service quality.