← All proceedings

182ND THE IIER INTERNATIONAL CONFERENCE

Proceedings cover: 182ND THE IIER INTERNATIONAL CONFERENCE

Cairo, Egypt 12-08-2018

5 papers

  1. Development of A New Span-Morphing Wing Core Design

    Peter L. Bishay, Erich Burg, Akinwande Akinwunmi, Ryan Phan, Katrina Sepulveda

    Paper ID AW-IACETICAIRO-11088-6562 · Pages 1

    Abstract

    This paper introduces a new design for the core of a span-morphing wing that increases the span-wise length of the wing by fifty percent. The purpose of morphing the wingspan is to increase lift and fuel efficiency during extension, increase maneuverability during contraction, and add roll control capability through asymmetrical span morphing. The span morphing is continuous throughout the wing, which is comprised of multiple partitions. Three main components make up the structure of each partition: a zero Poisson’s ratio honeycomb substructure, telescoping carbon fiber spars and pneumatic cylinders for actuation. The zero Poisson’s ratio honeycomb structure is an assembly of solid PLA internal ribs and Nylon Alloy 910 flexible chevrons. This innovative multi-part honeycomb design allows the ribs and chevrons to be 3D printed separately from different materials to accommodate design iterations and future maintenance, and to offer different directional stiffness. Because of its transverse rigidity and span-wise compliance, the design maintains the airfoil shape and cross-sectional area during morphing. The telescoping carbon fiber tubes interconnect to provide structural support throughout the wing while undergoing morphing. The whole wing can be covered with a continuous flexible composite skin made of a silicone rubber matrix with embedded unidirectional chord-wise carbon fibers to allow for span-wise compliance while maintaining chord-wise stiffness. The wing model has been computationally analyzed, manufactured, assembled, and experimentally tested to validate the simulation results. The new design proved to be superior to previously published span morphing wing core designs in terms of complexity, manufacturability and functionality.

    Keywords - Airfoil, 3D printing, carbon fiber tubes, telescoping spars, chevrons.

    Download PDF
  2. PVC Compounding: Preparation, Physical and Mechanical Properties

    N.S. Yousef

    Paper ID II-CBECAIRO-12088-12480 · Pages 2-7

    Abstract

    Compounding of PVC representsan important class of engineering materials that havebeen intensively developed in recent decades. Theincorporation of different additives such as fillers, plasticizers, and stabilizers, into thermoplastics has beenwidely practiced in industry to extend them and toimprove their properties. Among these improvedproperties are mechanical characteristics, dimensionstability, permeability, processability, thermal stabilityand flame-retardant enhancements, as well as costreduction with respect to the bulk polymers. In the present study, compounding of Polyvinylchloride (PVC) with some additives is studied for the enhancement of physical and mechanical properties. Composites of poly(vinyl chloride) (PVC) is blended with different fillers, stabilizers , plasticizers and lubricant such as: calcium carbonate as a filler and stearic acid as a lubricant, tribasic lead sulfate as a stabilizer and Di-octyl phthalate (DOP) as a plasticizer, and the effect of compounding on the physical and mechanical properties of polyvinylchloride (PVC) is studied.The experimental work is conducted in a batch mixer at a temperature of 120º C for half an hour with continuous stirring for both rigid and soft PVC. In case of rigid PVC, the filler content ranged from 10- 20% by weight of sample, tribasic lead sulfate (2.2 wt%) and lubricant (stearic acid 0.5 wt%) and no plasticizer is added in the sample . In case of soft PVC, no filler is added, plasticizer ranged 60- 90%,by weight of sample, tribasic lead sulfate stabilizer (3 wt%) and lubricant (stearic acid 0.5 wt%). In case of rigid PVC, experimental results show that tensile stress increased with increasing filler content and reached maximum value of (531 kg/cm2) at12 % weight of CaCO3 filler. Yield stress increased with increasing filler content and reached maximum value of (521 kg/cm2) at 12 % weight of CaCO3 filler. On the other hand, the Izod Impact decreases with increasing filler content. % Elongation at break increased with increasing filler content and reached maximumvalue of (200 %) at 12 % weight of CaCO3 filler.Relative density of rigid PVC is directly proportional with % weight of filler. In case of soft PVC, experimental results show that tensile stress is directly proportional with plasticizer content and the optimum % plasticizer is 70 %. Relative density of soft PVC is directly proportional with % weight of plasticizer and the optimum % plasticizer is 70 %.% Elongation at break increased with increasing plasticizer content and reached maximum value of (380 %) at 70 % weight of plasticizer and then decreased. Hardness (shore A) is directly proportional with plasticizer content.

    Key words - PVC, compounding, fillers, plasticizers,stabilizers,lubricant, physical properties, mechanical properties.

    Download PDF
  3. Identifying the Pragmatic Meaning of Reduplication in Some Selected English Sentences

    Ibtihal M. Al Tameemi , Mahmood A. Farhan

    Paper ID II-PLTCAIRO-12088-12234 · Pages 8-10

    Abstract

    Language is a vital means of communication changing through time and this change may be reflected in the appearance of new vocabulary items represented by word-formation processes .Reduplication , one of those fertile processes , is a linguistic phenomenon found in morphological and phonological levels. However, it is rarely found in pragmatics. Accordingly , the current paper is concerned with the pragmatic level of reduplication in English .The main problem is attributed to the fact that EFL learners may figure out the morphological and phonological levels of reduplication in some English sentences, yet they may not be able to understand the pragmatic meaning of reduplication due to certain extra-linguistic factors. The essential aim of this paper is to describe reduplication in English and to show its intended meaning in some English sentences. The procedure followed in this paper is to describe this phenomenon according to morphological and phonological aspects in English and Thomas’s Model of meaning (1995) is adopted in this paper. The data are collected from TV., internet and YouTube. This paper has come up with the following conclusions : (1) it is possible for EFL learners to figure out reduplication in terms of morphology and phonology ; (2) it is difficult for EFL learners to understand reduplication in terms of pragmatic aspects due to the extra –linguistic factors; (3) it is found that reduplication is rarely existed in pragmatics

    Index Terms - EFL , morphology , phonology , pragmatics , reduplication.

    Download PDF
  4. Study the Thermal Problem in the Friction Clutches Applying a Different Applied Pressure Functions

    Oday I. Abdullah, Josef Schlattmann

    Paper ID II-RIETCAIRO-12088-12487 · Pages 11-15

    Abstract

    The thermal problem in the friction clutches is considered an essential issue that affects the performance and lifetime of the contacting surfaces of elements of the clutch system. Therefore, this paper focused on an essential factor affect the thermal behavior of the friction clutches, this factor is the function of applied pressure during the sliding period. The effect of the applied pressure function in the dry friction clutches is investigated theoretically. Two functions of applied pressure were assumed; constant and increasing linearly with the sliding time. A finite element technique has been used to compute the temperature distribution of the contacting surfaces of the friction clutch disc at any instant during a single engagement. Axisymmetric finite element models were developed to find the solution of theromelstic coupling problem in the automotive clutches. The numerical results showed that the highest temperature appeared when applying a constant pressure whereasthelower values of temperatures appeared when applying the linear function of applied pressure.

    Keywords -Thermo-elastic problem; Single-disc friction clutch; Applied pressure; Thermal analysis; Finite element technique.

    Download PDF
  5. The Role of Guerrilla Marketing in Increasing The Competitiveness of Small and Medium Enterprises

    Benlakhdar Mohamed Larbi, Bensaid Amel, Yagoub Asma

    Paper ID AW-IC3SECAIRO-11088-6581 · Pages 16-21

    Abstract

    Nowadays, the competitive advantage in the world of business becomes an important thing sought by many institutions, especially in an environment full of conflicts for surviving and the development which is accompanied by menaces. For this reason this study aimed at indentify the role played by Guerilla Marketing in competitive increase medium- sized enterprises and small (SME), through an applied study of “RACINE Institution” in Béchar city, to achieve this purpose an interview with the director personally was done, a questionnaire was prepared, and suitable statistic styles were used. The study’s results showed how effective Guerilla Marketing is in the increase of SME competitiveness, in addition to the viability of its success through the adoption of innovative methods and maintenance of the credibility of the advertising message with a constant willingness to take risks and all these by adopting a low budget.

    Key words - Guerilla marketing, competitiveness, Small and Middle Institutions (SME)

    Download PDF