← All proceedings

53RD THE IIER INTERNATIONAL CONFERENCE

Proceedings cover: 53RD THE IIER INTERNATIONAL CONFERENCE

Kuala Lumpur, Malaysia 10-01-2016

ISBN 978-93-85832-99-4

16 papers

  1. Modelling Of Subcooled Flow Boiling Heat Transfer Of Water Through A Vertical Heated Pipe

    Iman Behroyan, Poo Balan Ganesan

    Paper ID II-APMMAL-10015-01 · Pages 1-4

    Abstract

    the sub cooled flow boiling of water in a vertical heated pipe is numerically investigated. For this purpose, the Eulerian-Eulerian (E-E) two-phase CFD model is used in this study. A sensitivity test is carried out to present the effects of the nucleate boiling parameters (i.e. nucleate site density, bubble frequency, and bubble departure diameter) on the heat transfer prediction of water subcooled flow boiling.

    Index Terms- nucleate boiling parameters, Eulerian-Eulerian model, and boiling heat transfer

    Download PDF
  2. Modelling Of Subcooled Flow Boiling Heat Transfer Of Water Through A Vertical Heated Pipe

    Iman Behroyan, Poo Balan Ganesan

    Paper ID II-APMMAL-10015-01 · Pages 1-4

    Abstract

    the sub cooled flow boiling of water in a vertical heated pipe is numerically investigated. For this purpose, the Eulerian-Eulerian (E-E) two-phase CFD model is used in this study. A sensitivity test is carried out to present the effects of the nucleate boiling parameters (i.e. nucleate site density, bubble frequency, and bubble departure diameter) on the heat transfer prediction of water subcooled flow boiling.

    Index Terms- nucleate boiling parameters, Eulerian-Eulerian model, and boiling heat transfer

    Download PDF
  3. Determination Of Heavy Metal (Pb, Cd And Zn) In Blue-Green Algae (Nostoc Commune) By Atomic Absorption Spectrophotometry

    Pimchana Hoktha, Apisit Kaewmekha

    Paper ID II-NSEMAL-10016-3051 · Pages 5-6

    Abstract

    The blue-green algae(Nostoc commune) is edible algae. It was traditionally used tomaintain the stomach and intestines.Blue-green algae occur naturally in a wide varietyof environmentsincluding ponds, drainpipe area and flooding area.All of water sources have been contaminated.Therefore the determinations of heavy metals in algae wereimportant.The samples were collected from five areas. The samples were analyzed byAtomic Absorption Spectrophotometer (AAS). The results showedthe ranged concentration of 2.3-3.7, 15.0-29.0 and 7.9-76.3 mg/kg dry weight for Cd, Pb and Zn, respectively. The concentration of Cd and Pb were significantly higher than permission limits set by Food Safety Law and Regulation (Thailand). 1981. The blue-green algae consumption should realize this and focus on the sources of growth.

    Keywords- AAS, Blue-green algae, Cadmium, Lead, Zinc

    Download PDF
  4. Precipitation Hardening Behaviour Of Two Stage Stir Cast Al6061-Sio2 Composite

    Gowri Shankar M C, Shivaprakash Y M, Ss Sharma, Achutha Kini

    Paper ID II-RIETMAL-09016-01 · Pages 7-12

    Abstract

    In the present work Al6061-SiO2 composites are produced by two stage stir casting method and subsequently studied various properties. Microstructure, hardness, tensile and wear properties of Al6061 based composite reinforced with silicon oxide particles of various weight percentage (2, 4 and 6% wt.) is analyzed and presented. The aging behavior and tensile properties of the cast material were studied. Experimental results show fairly uniform distribution of the SiO2 particulates in the matrix of the Al 6061 leading to higher hardness, and tensile strength. Presence of SiO2 particles in Al6061 alloy accelerating the aging process and thus attains higher strength. These particles provide more sites for the nucleation of fine precipitates. These fine precipitates hinder the movement of dislocation and thus increases hardness as well strength of materials. After aging at 100ᴼC for Al6061/6% wt. SiO2 composite , highest strength is observed at longer duration of aging. Comparison of the characteristics study before and after heat treatment was done and it is observed that there is an improvement in hardness, tensile strength and wear resistance of both Al6061 alloy and its composites after precipitation hardening treatment.

    Index Terms- Al6061 Alloy, Metal Matrix Composites, Stir Casting, Precipitation Hardening

    Download PDF
  5. An Intelligent Sensor Based System For Physical Condition Prediction And Disable People Monitoring (Dpm)

    Nusrat Jahan Farin, Iftekharul Mobin, Sharmin Akter

    Paper ID II-RIETMAL-09016-02 · Pages 13-18

    Abstract

    Download PDF
  6. Caclulation Of Inductance Coefficients Of Hnduction Machines Under Dynamic Rotor Misalhgnment Fault

    Hamidreza Akbari

    Paper ID II-RIETMAL-09016-2660 · Pages 19-22

    Abstract

    In this study, for calculation of induction machine inductances under dynamic axial non-uniformity condition, modified winding function method has been used. This method is able to calculate the inductances of induction machine with no restrictions about the axial and radial non-uniformities. The inductances of a three-phase squirrel cage induction machine under dynamic rotor misalignment conditions are calculated. Effects of several rotor axial asymmetries on inductances in these conditions are shown.

    Keywords- Induction machine, Rotor misalignment, Analytical model, Inductance calculation.

    Download PDF
  7. Perceived Affordances From Icon Symbols

    Mohd Nur Faiz B. Abd razak

    Paper ID II-RIETMAL-09016-3082 · Pages 23-28

    Abstract

    Download PDF
  8. Developingsets (Science, Environment, Technology, And Society)Learning Mediumin Labschool Elementary Choolunnes

    Sri Sulistyorini

    Paper ID II-SSEMAL-10016-03 · Pages 29-31

    Abstract

    Download PDF
  9. The Changes Of Work Values On Indonesian People

    Siti Nuzulia

    Paper ID II-SSEMAL-10016-3019 · Pages 32-35

    Abstract

    Download PDF
  10. Developing Of Navigation System Of Hypermedia Learning Model For Primary Education Level

    Farid Ahmadi

    Paper ID II-SSEMAL-10016-3020 · Pages 36-40

    Abstract

    Download PDF
  11. Atip Nurharini

    Paper ID II-SSEMAL-10016-3021 · Pages 41-44

    Abstract

    Download PDF
  12. Explorating Character Values In Primary School With Javanese Culture Background

    Martiarini, Nuke

    Paper ID II-SSEMAL-10016-3023 · Pages 45-47

    Abstract

    Download PDF
  13. Eko Purwanti

    Paper ID II-SSEMAL-10016-3024 · Pages 48-51

    Abstract

    Download PDF
  14. Experimental Studies On Grey Cast Iron Reinforced Aa6061 Composite

    Shivaprakash Y M, Gowrishankar M C, SS Sharma, K V Sreenivasa Prasad

    Paper ID II-RIETMAL-09016-03 · Pages 52-55

    Abstract

    Aluminium alloy composites are widely used because of their higher strength, stiffness and good wear resistance. In producing these composites the reinforcing materials used in common have been silicon carbide, aluminum oxide, boron carbide and graphite in the form of particles or whiskers. The ceramic particles reinforced aluminum composites are new generation materials which can be tailored for particular properties for specific application requirements. The particulates reinforced composite have best plastic forming ability than that of whisker or fiber counterpart and hence have emerged as most demanding reinforcements with great cost advantage. The particulate reinforced composites have been proved to be most suitable for heat and wear resistance applications. In the present study microstructure, hardness, tensile and impact properties of AA 6061based composite reinforced with Grey Cast Iron (GCI) is analyzed and presented. The presence of Grey Cast Iron resulted in improving the mechanical properties of their respective composites. The micrographs of the composites studied revealed the uniform distribution of the particles in the matrix system. Comparison of the characteristics study before and after heat treatment was done and it was found that there is an improvement in hardness, tensile strength and impact resistance of the composites as well as AA 6061 alloy after heat treatment.

    Index Terms- particulate, metal matrix composites, stir casting, heat treatment

    Download PDF
  15. Hand Detection For Sign Language Recognition Applying Hidden Markov Model

    Mohd Noah A. Rahman, Armanadurni Abdul Rahman, Afzaal H. Seyal, Norhafilah Bara

    Paper ID TA-CSSNITKLMPR-100116-801 · Pages 56-59

    Abstract

    Download PDF
  16. A Study Of The Finite Difference Methods And The Weno Schemes In The Resolution Of Schrodinger Equation

    Yacine Benhadid

    Paper ID II-APMMAL-10015-02 · Pages 60-65

    Abstract

    Download PDF