Zurich, Switzerland 16-04-2018
Every year about two billion components are manufactured by forging. Because of the high temperatures and high forming forces required, many components are produced in a segmental manner and later joined together, e.g. by welding. In order to save manufacturing steps – and thus costs and time – a production process is to be developed in which elements of different steels are simultaneously deformed and joined in a single forging. These elements could have very different geometries and thus strongly influence the manufacturability of complex parts. This combination of deformation and joining is called a hybrid process. In this paper, an investigation on the simultaneous forging and joining of massive bulk and sheet elements is described. The aim is to characterize a first influence of the different forming temperatures on the resulting joint zone of the hybrid process. For this purpose, a series of tests are carried out using a screw press. To find out if there is a correlation between the temperature and the quality of hybrid forgings, the samples are analyzed by means of tensile tests and metallographic analysis. These analyses show the influence of the forming temperature on the joint zone. Based on the knowledge gained, the joint zone can be characterized and evaluated. The main finding is that at higher forming temperatures, the areas of material bonding are significantly stronger than at low temperatures. The findings obtained contribute to the development of joining by hybrid forging. The results can be used to further investigate the relevant manufacturing processes and component properties of hybrid parts.
Keywords- Forging, forming, hybrid process, massive element, sheet element, tensile test, metallography
Taking the increasing importance of risk-based thinking and importance of improving ways of getting education, this paper aims at boosting knowledge about risks in high education. In line with this, the rank of specific risks in online education according to their importance from the student’s point of view is pointed out. Since teaching process was observed as the main process of online education in High Education Institutions (HEI), we conducted the questionnaire to establish the rank of risks related to this process. The research also aims at identifying best methods for avoiding these risks. This can help HEI to identify possible risks in order to improve their teaching processes by using the best methods. Based on received 71 responses to the questionnaire, using t-test and SPSS software, three the most important risks are pointed out: lack of self-regulation and self-motivation in online environment, sense of isolation by students and low quality of communication with teachers. Also, it is considered in the paper if there are differences in ranking risks’ importance between different groups of students.
Keywords- Risks, Importance, E-learning, Distance learning, Teaching process.