← All proceedings

157TH THE IIER INTERNATIONAL CONFERENCE

Proceedings cover: 157TH THE IIER INTERNATIONAL CONFERENCE

Mecca, Saudi Arabia 23-03-2018

4 papers

  1. Antenna Selection for the Femtocell Communication Signal for Network Connectivity

    Khairayu Badron, Ahmad Fadzil Ismail, Sarah Yasmin Mohamad, Mimi Aminah Wannordin, Wahidah Hashim

    Paper ID II-RIETMECCA-23038-9323 · Pages 1-6

    Abstract

    The studies report on the selection of antenna for femtocell cellular base station application. We have categorized the influential signal lost factors into four core elements that were experiences by the users. We have conducted measurement on Received Signal Strength Indicator (RSSI) parameter in the campus environment and outline the steps and techniques of such research activity. Our studies show that certain type of antenna that have been use by provider at the base station to connect a single network connection might not be able to support for reliable Internet network connectivity for critical communication device.. Hence, the technique to select antenna type for the communication module could be an effective solution to combat the issue on signal lost for GSM, CDMA2000, TD-SCDMA, WiMAX and LTE solutions providers.

    Keywords - Femtocell system; antenna; RSSI

    Download PDF
  2. Multiband Printed Monopole Antenna for Wi-Fi and Satellite Communication Applications

    Amjad Iqbal, Asif Khan, Zia Ul Islam, Muhammad Hameed Khan

    Paper ID II-RIETMECCA-23038-9392 · Pages 7-9

    Abstract

    In this paper, a multiband monopole antenna oper-ating at three different frequencies is presented. The proposed antenna works at 2.2, 5.9, and 8.5 GHz. The size of the proposed antenna is 28*24*0.08 mm3. The main objective of this paper is to design an antenna which can operate at multiband frequencies. This antenna is designed on FR-4 substrate which has 0.8 mm thickness, its relative permittivity and loss tangent are 4.4 and 0.02 respectivily. The presented antenna is constructed in three steps. Step 1 consists of a square ring feed by simple microstrip line. A stub is inserted between the square ring and the feed line for impedance matching. In step 2, two changes are made. I-shaped strip and a slot are added inside the square ring. In step 3 another I-shaped strip is added. The proposed antenna with simple structure has three bands covering 2.1-2.2, 5.8-5.9 GHz (Wi-Fi) and 8.4-8.5 GHz (Satellite Communications) are achieved with bandwidths of 112.7 MHz, 55.6 MHz and 144 MHz having resonance frequencies 2.2, 5.9 and 8.5 GHz respectively.

    Download PDF
  3. Implementation of A DPSK Communication System on Digital Signal Processor Tms320c6711

    Waseem Khan, M. Atique-Ur-Rehman

    Paper ID II-RIETMECCA-23038-9907 · Pages 10-13

    Abstract

    This paper presents the implementation of a differential phase shift keying (DPSK) communication system on a DSP platform. Real-time issues of a typical DPSK system are main focus of this paper. Techniques for synchronization are described and have been implemented. White Gaussian noise has been generated and added by the transmitter part itself to simulate an AWGN channel. The consequent bit error rates were noted and compared with the theoretically calculated ones.

    Keywords - DSP; C6711; Real-time BPSK

    Download PDF
  4. Optimizing the Utilization Cement Slag and Fly Ash of Concrete Quality

    Ranti Hidayawanti, Supriadi Legino, Didik Harjanto

    Paper ID II-SIMMECCA-23038-10561 · Pages 14-18

    Abstract

    Development of knowledge and technology in the field of Construction required a building material that has a better advantage than existing building materials so far. The use of concrete using slag and fly ash reduces the consumption of cement so that efficiency is expected in the construction world, but licensing the use of hazardous waste is not easy in Indonesia.The experimental method tested on the K100-700 concrete quality from laboratory testing with a percentage of 20% indicates a sufficiently favorable level of efficiency.In addition, the quality obtained is equivalent to standard concrete products. Utilization of hazardous waste can cut production costs, however, regulations related to the use of hazardous waste for raw materials of concrete should be facilitated since it can cut production costs, and it is also helping reduce environmental pollution.

    Index Terms - Cement Slag , Fly Ash, Concrete Quality, Production Cost.

    Download PDF