← All proceedings

130TH THE IIER INTERNATIONAL CONFERENCE

Proceedings cover: 130TH THE IIER INTERNATIONAL CONFERENCE

Saint Petersburg, Russia 08-10-2017

9 papers

  1. Analytical Solitary Wave Solutions for The Boussinesq Equation Containing Nonlinearity in The Time-Derivative Term

    Sh. Amirov, M. Anutgan

    Paper ID II-APMSAINT-08107-7699 · Pages 1

    Abstract

    The Boussinesq equation and similar types of this equation are used to analyze the behavior of water waves in aquifers under various boundary conditions. According to the properties of boundary conditions, for example in the presence of suddenly changing water heights or in inclined aquifers, the Boussinesq equation can have nonlinear terms. Nonlinear terms in such nonlinear Boussinesq equations often appear within the space-derivatives. Sometimes, nonlinear terms can be encountered in the time-derivative of the Boussinesq equation, for example, while analyzing the propagation of the electrical signal in a transmission line containing a semiconductor diode with nonlinear capacitance-voltage characteristics. Such equations are desired to be analytically solved to accurately determine the ultimate behavior and stability of the corresponding systems. In this work, we study the analytical solitary wave solutions of a Boussinesq equation with nonlinearity in the term in which the time-derivative exists. For this purpose, first the partial differential equation is transformed to an ordinary differential equation by performing the change of variables ξ = x-ct. Then, using specially selected function series expansions, a system of overdetermined algebraic equations is obtained from the ordinary differential equation, where the unknowns are the coefficients of the series. This system of algebraic equations is solved with Mathematica and the coefficients of the series are found. Using these coefficients, the behaviors of the possible solutions of the partial differential equation are investigated.

    Keywords - Boussinesq equation, nonlinear partial differential equation, solitary wave solution

    Download PDF
  2. Creationof an Optimal Polymer Nanocompositefor Use in Parallelenvironmental Noise Barriers

    Mahdiyeh Naderzadeh, Mohammad Reza Monazzam, Ismaeil Ghasemi, Hossein Arabalibeik

    Paper ID II-RIETSAINT-08107-01 · Pages 2-7

    Abstract

    In recent years, following the use of parallel noise barriers in control of urban noise pollution, acoustic engineers have made their attempts to create an optimal material based on nano-composites as a Sound-absorbing material. They can be used in the structure of parallel noise barriers in order to reduce multiple reflections. Accordingly, the present study was performed to create an optimized absorber transparent polycarbonate/poly methacrylate-based polymer nanocomposite in parallel environmental noise barriers in order to reduce multiple reflections. For this purpose, a twin-screw extruder was used to mix 0.3 wt% SiO2, ZnO, and TiO2 nanoparticles with pc and PMMA polymers.Scanning electron microscopy (SEM) was used to study the surface morphology of thenanocomposites. In order to test the sound absorption coefficient of the specimens, Two-microphone impedance tube was used. Finally, due to optimize the acoustic properties of the specimens and to reduce any surface defects caused by molding, the surface was roughed by sand blasting machine. Mechanical properties were characterized by tensile, flexural strength, izodimpact, and Shore hardness tests. The transparency of the nano-composites was checked by UV-vis spectroscopy. The morphology results described dispersion of the nano-particles in the polymer matrix. The obtained results showed that the pcsi3-r nano-composite, compared to the other specimens, had the highest acoustic absorption coefficient at the middle frequencies of 500 Hz. According to the tensile modulus and hardness test results, the mean tensile modulus and hardness of the nano-composites was higher than that in pure polymers. Also, the flexural modulus of nanocomposites was always higher than the net PC and PMMA, except for the pczn3 specimen. The transparency test results showed that adding nanoparticles to the PC and PMMA matrix considerably decreased the transparency of the specimens, compared to the pure polymers.In conclusion, adding 0.3 wt% of nanoparticles to the polycarbonate and poly methyl methacrylate-based matrix and roughening the rigid surface of the specimens increased the mechanical properties and also sound absorption coefficient in the middle frequencies.

    Keywords - Nanocomposites, Environmental Noise Barriers, Absorption Coefficient, Transparency, Mechanical Characteristics

    Download PDF
  3. Effect of Curing Temperatures and Naoh Concentrations on Compressive Strength of Geopolymer Pastes Produced from Elaziğ Ferrochrome Slag

    Mehmet Burhan Karakoç, Ibrahim Türkmen, Enes Ekinci, Fatih Kantarci

    Paper ID II-RIETSAINT-08107-7907 · Pages 8-10

    Abstract

    Recently, an increasing interest has been appeared for geopolymer as a binding material because of the benefits that it brings via, using of industrial waste materials such as ferrochrome slag, fly ash, blast furnace slag and reduction in greenhouse gas emission caused by cement production. The objective of the present work is to investigate effect of different NaOH concentrations and curing conditions on mechanical properties geopolymer pastes produced from Elazığ ferrochrome slag (EFS). EFS was alkali activated with NaOH solutions prepared with different molarities (8, 10, 12, 14 and 16M). Liquid/binder ratio was determined as 0.28 experimentally. Specimens produced in this way were cured at 50, 100, 150°C and laboratory conditions for 72h. For each specimen produced using this different parameters, the change in compressive strength was determined with time (3 to 28 day) for geopolymer pastes which were both cured in laboratory conditions and cured in oven three different curing temperatures. Additionally, ultrasonic pulse velocity values of geopolymer paste samples were obtained. The values obtained from compressive strength tests proved that there is an significant effect of different curing temperatures on mechanical properties of samples. It was also observed that the molarity of NaOH has a considerable effect on compressive strength. Overall results indicated that the mechanical properties of EFS based geopolymer pastes were significantly affected by different molarity of NaOH and curing temperatures.

    Keywords - Geopolymer paste, Elazığ ferrochrome slag, compressive strength, UPV

    Download PDF
  4. Effect of Nanocomposite Powders on The Strength of Joints Bonded With Epoxy Adhesive Included Varied Proportions

    Ismail Saraç, Şemsettin Temiz

    Paper ID II-RIETSAINT-08107-8180 · Pages 11-15

    Abstract

    There is a considerable interest nanoparticles added structural adhesives, recently. Because, nanoparticles improve the mechanical properties of an adhesive and its joint. In this paper, the static strengths of adhesive joints incorporating Al2O3 , TiO2 and SiO2 nanoparticles (2wt%, 4wt% and 6wt% proportions in the epoxy adhesive) were compared to those adhesive joints without nanoparticles. Experiments were performed 20, 25 and 30 mm overlap lengths, respectively. DP460 epoxy adhesive, Al2O3 , TiO2 and SiO2 nanoparticles and AISI 304 stainless steel plates were used for manufacturing the single lap adhesive joints. The results of the experimental research revealed that average shear failure load was increased significantly nanoparticle-reinforced adhesive joints. The highest shear strength was obtained with 4 wt % nano-Al2O3 in epoxy adhesive, being almost four times higher than that of the without nanoparticles. As the shear strength increased, the locus of failure changed from interfacial to the mixture of interfacial and cohesive.

    Key words - Adhesive joints, single lap joints, nanoparticles, shear strength

    Download PDF
  5. Effect of Naoh Concentrations and Curing Temperatures on Mechanical Properties of Geopolymer Pastes Produced From Fly Ash And Elaziğ Ferrochrome Slag

    Ibrahim Türkmen, Mehmet Burhan Karakoç, Fatih Kantarci, Enes Ekinci

    Paper ID II-RIETSAINT-08107-8183 · Pages 16-18

    Abstract

    The effective researches are required for the purpose of minimize environmental pollution due to accumulation of industrial wastes such as fly ash (FA) and ferrochrome slag. The disposal, removal and storage of by-products which are produced apart from the main product is a big problem. In this experimental study, it was attempted to investigate effect of different NaOH concentrations and curing temperatures on mechanical properties of FA and Elazığ ferrochrome slag (EFS) based geopolymer pastes. FA was obtained from Iskenderun Iron & Steel Plant and EFS was obtained from Elazığ Ferrochrome Plant. The raw materials were mixed at equal rate (50% ). Liquid/binder ratio was determined as 0.36 experimentally. NaOH concentration were selected as 8, 10, 12, 14 and 16M. After casting, all samples were cured at 50, 100, 150°C and laboratory conditions for 72h. For each sample produced using this different parameters, 3, 7 and 28-day compressive strengths were tested. In addition, ultrasonic pulse velocity (UPV) values were obtained. When considering compressive strength results, it was observed that obtained values increased from 0 to 82.5MPa with increasing concentration and curing temperatures. Overall results indicated that different NaOH concentration and curing temperatures have a huge impact on compressive strength and UPV values of geopolymer pastes. The experimental findings have also showed that the usage of FA and EFS together as an alternative binding material was advantaged.

    Keywords - Geopolymer paste, fly ash, ferrochrome slag, compressive strength

    Download PDF
  6. Beam Strengthening Using Honeycomb Plates

    Yaşar Ayaz, Betül Berktaş,Edahan Koç

    Paper ID II-RIETSAINT-08107-8207 · Pages 19-22

    Abstract

    Damages occurs in reinforced concrete structure due to labor defect, material imperfections, external conditions and earthquakes. The structural elements such as beam and columns are need to be strengthened. The most common method used to strengthen the beam is attaching steel plates to beam. In this study honeycomb plates is used to strengthen beam. A reinforced concrete beam is modeled and solved with finite element analysis and compared with a beam joined with honeycomb plate.

    Keywords - Beam strengthening, honeycomb plates, finite element analysis.

    Download PDF
  7. Examining Secondary School Students Observations About Lesson Study Model

    Elif Boran, Kamuran Tarim

    Paper ID II-SSESAIN-08107-7921 · Pages 23-26

    Abstract

    The aim of this survey is examining the opinions of secondary school students about Lesson Study (LS) profoundly. The survey was carried out in one of the southern cities of the Republic of Turkey in a public school with 11 students.The working group of the survey was determined by criterion sampling method. The survey was carried out by qualitative research model and each student was negotiated by the structured interview method.It was used descriptive analysis for the interview data.In the consequence of the analysis it is seen that, while in the process of LS a lot of activities were conducted, technology was used, lessons became more amusing and didactic, therefore it was generally productive; before LS there was more excitement, even uneasiness and negative feeling because of being recorded.As a result students reported generally positive feedbacks for the survey.

    Key Words - Lesson Study, Secondary School Students, Career Development, Math Teaching

    Download PDF
  8. Pat Barker’s Union Street As A Response to Germaine Greer’s The Female Eunuch and The Concept Of Sisterhood

    Yiğit Sümbül

    Paper ID RW-ICAESMOSC-09107-01 · Pages 27-29

    Abstract

    Revealing the patriarchal discursive elements that shape the core of all human languages has been the mutual concern of the feminist critics in general and with that objective in mind they, to some extent, achieve to establish certain awareness among contemporary women to the constructedness of language and all cultural enterprises in today’s world. Although Greer’s text seems to be arguing the same things as her predecessors do like displaying the male voice embedded in the very language and culture, she also traces the female voice in this male-oriented history and tradition with a closer textual and linguistic analysis. In her famous work The Female Eunuch, she finds the ideal way to overcome this male-orientedness in solidarity among women generated out of, first, an awareness of the false idea of natural female subordination and, then, cooperative revolt by women in all walks of life. However, Pat Barker, in her debut novel The Union Street, frustrates all hopes regarding female solidarity and improvement in the present time.

    Index Terms - Pat Barker, second-wave feminism, solidarity, sisterhood, Germaine Greer

    Download PDF
  9. Automatic Image Registration Based Control Points and Evaluation

    Heung-Kook Choi, Boo-Kyeong Choi, Jae-Hong So, Nuwan Madusanka

    Paper ID II-RIETSAINT-08107-002 · Pages 49-53

    Abstract

    In this paper, we present a fully automatic image registration method, applied to a pilot study. Image registration plays an important role to the medical image field for the patient prognosis and diagnosis. Particularly image standardization and image correlation could be the most significant studies. Therefore, we have created several feasible two dimensional color training images with the objects having different major axes and sizes. The training images were rotated, translated, scaled and sheared. Consequently, we calculated the registered correction by the minimum squared error(MSE) of the between control points distances and object sizes. Then, we obtained a valuable result (>0.04). It could be useful to biomedical image registration.

    Index Terms - Automatic image registration, control points, standardization, color training images, registered correction, minimum squared error

    Download PDF