Auckland, New Zealand 06-10-2017
La0.1Sr0.9Co0.2Fe0.8O3-d(LSCF-1928)perovskite-type powderwere found to have remarkable catalytic activity and stability for the de-oxidation reaction of landfill gas (LFG) in our previous study.The bead and hollow fiber type catalysts were prepared using theLSCF-1928 powder. In the case of bead type catalyst with methyl cellulose (MC) as organic binder, CO2 emitted from MC was reacted with strontium, so the SrCO3 was formed. On the other hand, a single phase perovskite structures were formed without impurities when the hollow fiber type catalyst was fabricated without organic binder. Also, pore structure of the hollow fiberwas induced during phase inversion process, so the surface area of catalysts could be increased.Various spinning condition such as air gap and pressure of dope solution were investigated for control the pore size and porosity of the hollow fibers. The SEM images shows the hollow fiber structure which consists of two kinds of morphologies, namely: asymmetric outer skin layer with finger-like macrovoids, and sponge-like structure between the skin layer. All kind of the hollow fiber in this study have above 99.9% O2 conversion at 475 oC. Especially, hollow fiber type catalyst perepared with the condition of dope solution pressure: 7 bar, inner coagulant: 5 ml/min, and air gap: 2 cm has best performance of 70.65, 93.1, and 99.99% O2 conversion at 425, 450, and 475 oC, respectively.
Keywords - Catalyst, Perovskite Oxides, Hollow Fiber, Landfill Gas, Oxygen Removal, Methane Oxidation
To overcome the drawbacks of Simple Genetic Algorithm (SGA) and Particle Swarm Optimization (PSO) in multi-peak function optimization, such as insufficient diversity and local optimization tendency, a new artificial immune algorithm (IAIA) is proposed. Based on the traditional framework of the artificial immune algorithm, the algorithm redesigns the two key clone and mutation operators to address these drawbacks. Last, test functions were used to compare the IAIA with the SGA and the PSO. The research results showed that the IAIA algorithm has certain advantages in both convergence speed and accuracy in solving such optimization problems.
Keywords - Immune algorithms, multi-peak function, clone selection, Thermal Fatigue, function optimization.
In recent years, many Chinese enterprises have imported the precast concrete (PCa) methods, which includes different kinds of formed diversified construction method systems. However, it is difficult to form generality of these methods. additionally, there is no relevant and suitable regulations or standard drawings providing guidance for precast concrete methods in China nowadays. It causes a lack of unified module for structure systems and space design. At the same time, the one-sided emphasis on the rationality of the technology and many restrictions of the diversification of architectural design lead to house types and building appearance monotonous. This paper aims to provide realistic suggestions for the current situation and future development direction of prefabricated construction in China. The development history of prefabricated construction buildings in Japan and European countries has been reviewed. Combining with the current development of Chinese prefabricated building and housing industrialization, different construction methods of cases has been investigated systemically.
Index Terms - Construction methods; precast concrete building; Prefabricated Concrete; Housing industrialization
In this paper, an annual prediction method of pre-cooling and pre-heating performance for an earth-to-air heat exchanger (EAHE) by the unsteady CFD analysis which does not analyze flow fields to reduce the calculation load, are proposed, and the validity are verified of this analysis in comparison with by long-term measurements. We predict the annual thermal performance of an EAHE in a medical facility by long-term measurement results. Moreover, the prediction accuracy of this CFD analysis is verified by comparing the results of annual survey.
Keywords - Earth-to-Air heat exchanger, Long-term Measurements, CFD analysis, Calculation load reduction, Annual prediction method.
In this paper, we are trying to propose the concept of urban resiliency to solve the problem of urban water security. We develop a comprehensive framework to examine and measure the integrated urban resiliency which is shaped by four interacting domains. They are water volume resiliency, stability-resiliency, service function resiliency, and organizational structure resiliency. The approach Fuzzy Comprehensive Evaluation Model (FCE) was adopted for the evaluation of its role to assess urban resiliency.The result indicates that the integrated urban resiliency is mainly affected by the organizational structure resiliency in the four domains.Recommendations for improving the urban resiliency of different sub-levels are made to help guide the decision-makers to adjust urban water management governance approaches to local conditions.
Keywords - Fuzzy Comprehensive Evaluation Model, urban resiliency, urban water security, cluster analysis, sponge city.
The Evaluation Standard for Green Industrial Building (GB/T50878-2013) has been officially released in 2013. Industrial building has its own evaluation criteria which adapted to its specific characteristic. Since 2012 China launched the first batch of green industrial building evaluation, a total of 30 projects have been certified by Ministry of Housing and Urban-Rural Development of the People’s Republic of China (MOHURD) by the end of 2015. Under the development situation of Shanghai which is promoting industrial restructuring and upgrading, the demand of manufacturing and processing industry will decrease, while the amount of buildings mainly for scientific research, including office spaces and industrial production laboratories will grow dramatically. Unfortunately, the current evaluation system of green industrial building cannot completely apply to the latter. In the current 30 certificated green industrial buildings, Shanghai only has one certificated project. This paper analysed green industrial building development situation in Shanghai in detail which will help to develop a standard system that suit for building types of Shanghai industry transformation development characteristic, including for general plant and scientific research and development buildings, so that standardize the green building technology promotion and evaluation on industrial construction.
Index Terms - Green industrial building, Development present situation, Evaluation, Shanghai industry transformation
Over the past decades, the photovoltaic (PV) industry in China has been developed rapidly. The Chinese government has played an important role in this stage of PV development, which has issued a series of policies to support the development of solar energy, and the photovoltaic industry in particular. From 2013 to 2016, the annual installed capacity of China ranked at the top in the world and the accumulated capacity also ranked at the top globally. In this paper we evaluate the changes that have occurred in China over recent years in PV industry, demonstrate the governmental policies in different periods; and changes in the PV industry structure. The analysis section shows how much the PV industry has been diffused and what will make the development process rapidly. In future, the technique experience and advanced management strategies of PV development in China can be good reference for the other countries.
Keywords- China, Photovoltaic, Policy, Development
With the advanced development of science and technology, the mechanization of society and the increasing degree of industrialization, people tends to spend longer time in room, approximately accounted for more than 80% of their total life time.Improving the indoor environment, especially the indoor thermal and humid environment, is one of the main ways to improve the quality of life. People pay great attention to the indoor thermal comfort and realized the importance of indoor environment quality, such as sound, indoor light condition, hot and humid environment and indoor air quality, which will have a direct impact on people's physical and mental health. Indoor environment refers to all the parameters of the room; these parameters can affect the heat transfer and indoor ventilation to affect the human body's thermal comfort. This paper mainly through the actual measurement data and simulation data are compared to the study of indoor thermal environment.
Index Terms- Temperature;Humidity; Simulation; thermal comfort
In architectural engineering, Board structures have economical and constructional benefits. They are used for heavy loads and large spans structures as they exhibit higher stiffness and smaller deflection.But the traditional architectural modeling and structural analysis processes cannot be automated. This paper will present an approach to optimization of efficiency in Board structures. The work presented in this paper is explanation of the key link of process of parametric architectural design. This is a result of generating parametric structure system and structure logic of the final design form by researching the stress analysis and structural analysis of wooden Board structures. The paper first introduces the concept of parametric design and a kind of modeling platform, Grasshopper plug-in of Rhinoceros. By referring to the project of the Ongreening Pavilion that keeps concept of green technology as a study case to research architectural form, energy conservation, structure bearing and construction, a kind of parametric form with board structure pavilion is inspired to generate for explaining the rationality of practical application. Then, the main process of the parametric board structure design will be described, which includes the rationality of the different architecture forms, selection of key input and output parameter, script programming, structure system analysis(Karamba), optimization of the model by genetic algorithm and generation of construction plan and so on... On the other hand, the selection of materials is also a focus in this paper, the board structure is generated to achieve a new web-based platform for green building. For the initial design concept, the wood used is Japanese cedar that has a specific size.
Keywords- Parametric modeling, Board structure, Structural analysis, Japanese cedar
Urban is the center of the region society, economy, politics and culture. And urban is a symbol of human civilization and development. Urbanization is a common trend in many countries. In developing countries, this situation is particularly evident. With rapid urbanization, there are lots of environment problems. Among these environmental problems, the urban heat island effect is the most important. UHI has deep impacts on material cycles and energy transfers within urban ecosystems and has become an important issue in urban climate and environmental research. Hangzhou is an important city in the urban circle of the Yangtze River delta as the capital of Zhejiang Province in China. And nowadays, Hangzhou is in a period of rapid development. With the development of urban, the environmental problems become more and more important, especially the urban heat island effect. This paper, based on the Multi-time-phase TM /ETM+ Remote Sensing images, takes Hangzhou as an example to contrast four time inversions results and study the evolution rule and the characteristic of the heat island effect with Single-Channel Algorithm. Through this study, we can find the evolution law of urban heat island in Hangzhou. And then for the future development of cities and solutions to the urban heat island effects, it can provide a more effective way of train of thought and methods
Index Terms— GIS; Remote Sensing; Urban Heat Island; Land Surface Temperature; Single-Channel Algorithm
In this study, we carried out CFD analysis coupled with numerical thermoregulation model of human body for the ceiling radiation air conditioning system in an office space, and we also revealed the heat dissipation characteristics of the human body based on these analysis results. Two cases of the analysis were carried out. One is the ceiling radiation air-conditioning system, and the other is the ceiling supply air-conditioning system (VAV system). As a result, the ratio of radiation heat loss from human body in ceiling radiation air-conditioning system was larger than that in ceiling supply air-conditioning system.
Keywords- CFD, JOS model, Virtual Manikin, Heat balance,
With the increasing demand of energy, the distributed energy system (DES), which with high efficiency of energy utilization and low environmental load, has been recognized by the society. The Kitakyushu Science and Research Park (KSRP) has been installed a distributed energy system which use the gas engine and full cell as the power generations in 2001. Now, the device of DES has run 15 years, it has been closed to the design life.This paper was collected and analyzed the operation and inspection data of fuel cell during 10 years. This paper analyzes the maintenance records of fuel cell use, failure modes and effects analysis method (FMEA). The result of this paper has been given to provide some plan and suggestion for the future development and maintenance.
Keywords: fuel cell, distributed energy system, maintenance
With the increasing demand of energy, the distributed energy system (DES), which with high efficiency of energy utilization and low environmental load, has been recognized by the society. The Kitakyushu Science and Research Park (KSRP) has been installed a distributed energy system which use the gas engine and full cell as the power generations in 2001. Now, the device of DES has run 15 years, it has been closed to the design life.This paper was collected and analyzed the operation and inspection data of fuel cell during 10 years. This paper analyzes the maintenance records of fuel cell use, failure modes and effects analysis method (FMEA). The result of this paper has been given to provide some plan and suggestion for the future development and maintenance.
Keywords: fuel cell, distributed energy system, maintenance