Bangkok, Thailand, 07-02-2015
ISBN 978-93-84209-86-5
In this paper, basic characteristics of the thermally driven pump in supercritical CO2 Rankine cycle system is studied. The thermally driven pump is a refrigerant (liquid CO2)-circulations pump composed of two expansion tanks. Because of no mechanical movement and also no electric consumption, thermal pump is designed to be utilized on power sourcing device compared to feed pump. The experimental result of the thermal pump, flow rate at exit point, and also temperature and pressure, are verified and discuss in this study. It can be found that the flow rate of thermal pump is not stable flow. Though, thermal efficiency of system is higher than using feed pump.
Keywords- Solar Energy, Supercritical CO2, Thermally Driven Pump, Rankine Cycle.
A time bomb (or a time bomb, time-bomb) is a bomb whose detonation is triggered by a timer. The use (or attempted use) of time bombs has been for various purposes including, terrorism, assassination and warfare. The explosive charge is the main component of any bomb, and makes up most of the size and weight of it. It is the damaging element of the bomb (along with any fragments or shrapnel the deflagration might produce with its container or neighboring objects). The explosive charge is detonated by a detonator. Mostly is terrorist attacks includes planting a time bomb at public places & in war field too this types of bombs are plant after leaving the hiding places. This proves to be very harmful when bomb diffusers fail to diffuse it. In order to reduce this risk we can make use of simple robots rather than going for complicated robots & strategies. As we know there is always presence of bomb diffusers in army, they take this risk at the cost of their life instead of that we can reduce this risk by robot. Some robots also designed where we are totally depended on them but here there also chances of having errors & confusing conditions for robots. Humans can take better decision than robots in critical conditions. So, in order to minimize chances of getting and error the design of robot must me simple with simple devices & their functioning. The robot mentioned is this paper is most simple one while the decision needed for diffusing bomb is given by bomb disposal experts sitting away from Robot & bomb as well. This reduces all the risks in war field and as well in terrorist attacks.
Keywords- Mechanism, Robot, Damaging Element, Diffuse Bombs etc.
In this paper, we describe the control strategy of high speed parallel robot system with EtherCAT network. This work deals the parallel robot system with centralized control on the real-time operating system such as window RTX, intime etc. Most control scheme and algorithm is implemented master platform on the PC, the input and output interface is ported on the slave side. The data is transferred by maximum 20usecond with 1000byte. EtherCAT is very high speed and stable industrial network. The control strategy with EtherCAT is very useful and robust on Ethernet network environment. Our system is selected window based Twincat EtehrCAT master platform for users. The system has very advantage for implementation and running of the control system.
Keywords- Parallel Robot Control, Ethercat, Realtime-Control
The configuration file size of a field-programmable gate array (FPGA) has increased rapidly. Thus, compression techniques are used to decrease the size of bitstreams. Two parameters are employed to measure compression, namely, compression ratio (CR) and decompression speed. Existing studies in this field have focused on two directions: small CR with slow decompression speed, and fast decompression speed at the cost of CR. This paper proposes a novel decode-aware compression technique with small compression ratio and minimal decompression time. The paper contributes to the literature by 1) proposing a novel dictionary selection algorithm that can avoid dictionary repetition, and 2) introducing an improved parameter selection that can provide a better CR. The experimental results showed that our approach outperforms the existing compression maximum of 15% in terms of compression ratio. Moreover, the decompression hardware can operate at 330 MHZ on a Virtex-5 FPGA.
Keyword- FPGA, Bitstream, Compression, Dictionary Compression
Huge number of accidents every year happens because of adequate attention to the Health and Safety Engineering Management System (HSE.MS). Consequence assessment is one of the most important steps in safety and risk assessment. Consequence modeling refers to the calculation or estimation of numerical values (or graphical representations of these) that describe the credible physical outcomes of loss of containment scenarios involving flammable, explosive and toxic materials with respect to their potential impact on people, assets, or safety functions. This paper presents recommended approaches to consequence modeling for accidental releases of hazardous materials, with the potential to cause harm to people, damage to assets and impairment of safety functions, from offshore and onshore installations. Among consequence modeling soft wares PHAST (DNV software) is explained and a case study is done at one of the Petrochemical Complex in Asalooyein the Persian Gulf on the ammonia storage tanks. Finally some conclusions and recommendations are made.
Keywords- Chemical Plant, Ammonia Storage, Consequence Modeling
The offshore drilling process uses drilling fluids (mud) and generates waste fluids and cuttings. Drilling fluids used in offshore drilling operations are water based drilling fluids (WBF), oil based fluids (OBF) and synthetic based fluids (SBF). The wastes generated in the largest volumes during drilling oil and gas wells are drilling fluids and cuttings. There are several options to manage offshore drilling wastes: offshore discharge, offshore down whole injection and onshore disposal. In many parts of the world, some types of drilling fluids and drill cuttings may be discharged to the sea if they meet certain environmental requirements. The different drilling fluids, the ecological effects of drilling fluids and drill cuttings discharged from offshore platforms, and discharge standards are presented in this paper.
Keywords- Offshore Drilling, Drilling Fluids, Waste Management, EU Standards
Floods are natural disasters caused by the overflow of sea water or river water caused by rainfall. The flood disaster is becoming one of the biggest problems faced in every country because it caused damage, the spread of the disease, and loss of life. In 2012, major floods occurred in five countries: China, Nigeria, Myanmar, Russia, and Italy. Appropriate controlsis a solution to prevent flooding.Kamir R. Brata a researcher of the Institute of Agriculture (IPB), which is the creator Biopore holes technology that use organic waste to cope with stagnant water by increasing the water absorbing power on the ground. Biopore infiltration holes can be used as an alternative for flood control by relying on the principle of water infiltration. Biopore infiltration holes must be applied appropriately, focused and true to the flooding that occurred in various countries can be resolved. Application of biopore technology can be applied by making the policy of "One Day for Biopore". The policy involves all layers of society in every country so that the effect of the biopore infiltration hole can be immediately felt and society becomes more concerned about the environment.
Keywords- Biopore Infiltration Hole, Flooding
Nowadays, a number of mobile users who use mobile phone are increasing rapidly in mobile network. There are many researches that focus on improving Quality of Services (QoS) using many scheduling algorithms by addressing the resources sharing problem. The optimal resource scheduling of mobile networks for various mobile users in different mobile operators is a demanding problem. The Quality of Experience (QoE) of mixed users in different mobile operators is still remained. Therefore, in this paper, the framework of a new scheduling method in mobile network is proposed to satisfy efficient QoS such as fairness and delay for mobile users who use voice service. In the system, Priority based Round Robin (PRR) scheduling adaptively balances between mobile operators and reduces delay of voice users for QoE in mobile network.
Keywords- QoS, QoE, PRR
This research proposes the effectiveness of synergistic extractants on the separation of arsenic ions in produced water from crude oil production via hollow fiber contactors modules (HFCM). Aliquat 336 and Cyanex 921 dissolved in kerosene were used as the organic extractants. The maximum extraction was obtained 84% by using 0.15 M Aliquat 336 mixed with 0.1 M Cyanex 921.
Keywords- Synergistic Extractant, Arsenic, Hollow Fiber Contactor Modules
Cold shock proteins are nucleic acid-binding proteins. They are well conserved in bacteria, animals as well as plants. Prokaryotic CSPs possess a single cold shock domain while animal CSPs are flanked by N- and C-terminal domains. Eukaryotic CSPs are commonly named Y-box proteins. Interestingly, the plants CSPs contain a C-terminal domain in addition to their N-terminal CSD. The CSPs have been reported to have important role in development and stress adaptation in various plant species. Main objective of this study was to perform molecular phylogeny studies on different plant CSPs..
Keywords- CSP, N-terminal, C-terminal. , Phylogeny
This paper describes an investigation of the effect of using rice husk ash, in combination with lime and cement, as well as the production of low cost masonry units. The mass of binder was maintained (RHA mortar) or partially replaced by Rice husk ash (RHA) in weight percentages of 5%, 10%, 15%, 20% and 30%. The mortar samples were exposed to the same curing conditions, and afterwards tested at different ages, up to 28 days. The results of compressive strength are 3.10 MPa, 3.05 MPa, 3.32 MPa, 3.27 MPa, 8.48 MPa, and 5.69 MPa respectively. The partial substitution of lime by rice husk ash as agricultural waste can be useful to adjust the mortars characteristics for different types of supports and applications sites. Based on laboratory test performed, the addition of 20% rice husk ash is maximum composition to enhance strength and durability of lime mortar. The high silica content in RHA may also bond aggregate with each other. This may provide an opportunity for rice husk ash to be promoted widely in the world related to the enhancement in lime mortar for the construction and conservation of historic buildings.
Keywords- Lime Mortar, Rice husk Ash, Strength, Durability, Waste Material
Over the recent two decades, robust design has been popularly utilized as a powerful method to improve the quality of products in the offline stage of manufacturing processes. Most estimation methods to define the functional relationships between the input factors and output responses are based on the response surface methodology (RSM) which requires several assumptions. Unfortunately, these assumptions are not always hold in the practical industrial problems. Based on the nature of artificial neural networks (ANNs), these relationships can be conducted without any assumption. Therefore, the primarymotivation of this paper is to propose the ANNs as an alternative modeling method in robust design. First of all, an ANN framework-based robust design modeling method is proposed. Secondly, the generalized regression neural network-based modeling method is proposed to estimatethefunctions between the input and output variables.Finally, a comparative study between the proposed neural network-based estimation method and the conventional least squares method based on RSM is conducted in the numerical example. The final results show the efficiency of the proposed neural network-based modeling method in robust design.
Keywords- Robust Design, Response Surface Methodology, Generalized Regressionneural Network, Estimation.
Problem-based learning is a student centered approach that has been implemented in a number of higher educational institutes around the world. Problem-based learning is the program of learning and teaching process which has so many advantages in usage. One of the primary motivating influences of PBL is derived from the fact that problems are based on real-world situations or events. Problem-based learning incorporates innovative teaching and learning methodologies that are relevant and allows students to learn how to analyze the problem given and share classroom knowledge into practice. The educator acts as a facilitator and resource person to whom students can come to for advice or guidance. This paper aims to share experiences in teaching English language class using Problem-based learning method. This paper also has shownthat PBL is a promising approach in teaching language and approaches creativity, critical thinking and team working among students. However, the educators using this approach will face multiple challenges when implementing PBL and have to create and adapt effective strategies to successfully mitigate the challenges.
Keywords- Creativity, Critical thinking, Innovative teaching and learning, Problem based Learning.
with an increasing trend of waste generation worldwide, an effective waste management is needed. Recycling is one of effective methods to reduce waste. In this paper, 18 items are extracted from a number of literatures, both in developed and developing countries. These items, both qualitative and quantitative, are found influencing positive recycling behavior. Examples are attitude towards ecological behavior, age, garbage fee, and family income. These items will later be used in questionnaire survey development to gather data for further analyses.
Deregulation of the power sectors has been occurring in many countries worldwide. Many reforms have been undertaken by introducing commercial incentives in generation, transmission, distribution and retailing of electricity. There are many reasons for the restructuring of the power sectors and it depends on different countries geographical situations. MVA-Mile pricing involves load flow analysis to model the power flows on the transmission network to determine transmission charge. It expands upon the MW-Mile method into MVA-Mile method that is currently subject to considerable discussion and is under analysis. North Indian real test 37 bus test system results has been reported using MW-Mile and MVA-Mile methods and useful for power market.
Keywords- Deregulation, MW-Mile, MVA-Mile, Pricing.
Demolition and construction wastes make about 52 percent of the total generated wastes in Germany and is overall the biggest cause of wastes. Therefore this type of waste has a high impact on the construction industry and the strategy of waste handling belongs to the management of the companies. In Germany different waste management methods such as recycle, reuse, remanufacture and landfill are used. This paper focuses on the decision making about the choice which of the available waste management methods will be used. A questionnaire survey was created to collect necessary data in the German construction industry. Exploratory factor analysis was done to extract key factor influencing the reverse logistic decision. Structural Equation Modelling was then performed to examine the causal relationships of the extracted factors. The four key factors are Management, Investment, Costs and Constraints. The results show that the most important factor are the Constraints. The factor Constraints consist of many items including legislative pressure, site space, availability of landfill, possibility to replace virgin material with wasted components and the level of knowledge of sorting. The factor constraints cannot be influenced by the management or only with a high effort and need of time.Another important finding is the high influence of the factor Management on the factor Cost and factor Investment. As the management of companies makes decisions in terms of budgeting and cost controlling, those decisions influence the amount of costs in a significant way. Additionally all investment decisions are made by the management.
Keywords- Construction Industry, Decision Making, Reverse Logistic, Waste Management